File name: Pandora207s1_ArlingtonTX_20221128_L2Fit_fsus1c6d20221018p1-8.txt
File generation date: 20240823T115348.7Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Yang Li
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 207
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora207_OF_v5d20210722.txt
Instrument calibration file used: Pandora207s1_CF_v6d20221018.txt
Level 1 file used: Pandora207s1_ArlingtonTX_20221128_L1_smca1c6d20221018p1-8.txt
Full location name: University Of Texas, Arlington Science Hall
Short location name: ArlingtonTX
Country of location: United States
Location latitude [deg]: 32.7316
Location longitude [deg]: -97.1142
Location altitude [m]: 15
Local noon date: 20221128
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 5 "But different Reference day, final winter reference"
First and last pixel inside fitting window: 207 351
Nominal wavelengths inside fitting window [nm]: 306.0666 306.2079 306.3491 306.4904 306.6316 306.7728 306.9140 307.0552 307.1964 307.3375 307.4787 307.6198 307.7609 307.9021 308.0432 308.1843 308.3254 308.4664 308.6075 308.7485 308.8896 309.0306 309.1716 309.3126 309.4536 309.5946 309.7356 309.8765 310.0175 310.1584 310.2993 310.4403 310.5812 310.7220 310.8629 311.0038 311.1446 311.2855 311.4263 311.5671 311.7080 311.8488 311.9895 312.1303 312.2711 312.4118 312.5526 312.6933 312.8340 312.9747 313.1154 313.2561 313.3968 313.5375 313.6781 313.8188 313.9594 314.1000 314.2406 314.3812 314.5218 314.6624 314.8029 314.9435 315.0840 315.2245 315.3651 315.5056 315.6461 315.7865 315.9270 316.0675 316.2079 316.3484 316.4888 316.6292 316.7696 316.9100 317.0504 317.1907 317.3311 317.4714 317.6118 317.7521 317.8924 318.0327 318.1730 318.3133 318.4535 318.5938 318.7340 318.8743 319.0145 319.1547 319.2949 319.4351 319.5753 319.7154 319.8556 319.9957 320.1358 320.2760 320.4161 320.5562 320.6962 320.8363 320.9764 321.1164 321.2565 321.3965 321.5365 321.6765 321.8165 321.9565 322.0965 322.2364 322.3764 322.5163 322.6562 322.7962 322.9361 323.0759 323.2158 323.3557 323.4956 323.6354 323.7752 323.9151 324.0549 324.1947 324.3345 324.4742 324.6140 324.7538 324.8935 325.0332 325.1729 325.3127 325.4524 325.5920 325.7317 325.8714 326.0110 326.1507 326.2903
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20221128T134035.1Z 8367.569851 24 1 49.20 2 85.17 119.27 142.38 86.07 0.00 1 0.00 1 0 241 1.155e-01 3.212e-02 3.126e-01 3.885e-02 5.238736e-05 2.014081e-05 2.351688e-06 4.464948e-07 5.498437e-05 224.44 -2.00 3.32 -2.00 324.64 0.00e+00 1.968885e-02 9.856707e-03 2.583381e-03 1.952610e-05 1.499028e-02 285.44 -2.00 20.00 -2.00 325.35 0.00e+00 3.077044e-02 1.380697e-02 1.744245e-03 3.056457e-05 2.663167e-02 285.44 -2.00 20.00 -2.00 324.08 0.00e+00 2.387016e-02 3.365100e-02 3.387725e-03 2.019158e-05 2.855274e-02 285.44 -2.00 20.00 -2.00 324.49 0.00e+00 8.609438e-01 1.576656e-01 1.773156e-02 1.783972e-03 1.966063e-01 187.08 33.47 0.00 0.08 291.78 322.94 0.00e+00 -2.006241e-02 1.073139e-02 6.102201e-03 1.174804e-05 4.633820e-03 285.44 -2.00 20.00 -2.00 321.74 0.00e+00 10.061 0.014 303.00 329.40 4 -1.3438e+00 3.1138e-01 1.0721e-01 2.2849e-03 5.6820e-01 2.2250e+00 4.6274e-01 9.0577e-02 3.8253e-04 6.1376e-01 -1.5635e+00 2.6466e-01 5.2624e-02 1.4057e-04 3.3900e-01 4.1078e-01 1.0537e-01 2.9043e-02 7.1281e-05 1.1110e-01 4.5760e-03 4.8140e-02 3.2336e-03 5.4402e-05 6.8683e-02 1.4959e-05 9.0098e-01 2.2600e-01 7.8086e-09 2.4800e-11 1.1928e-07 1.8063e-03 2.7007e-03 3.0569e-04 1.9234e-06 5.3023e-03 7.7797e-03 0.0000e+00 9.0733e+00 2.2807e+00 1.0172e-01 6.3648e-04 3.0858e+00 12 8 8 10 0 0 -76.37 20.52 1.28 0.00778 0.02156 17 4 4 8 0 2893.330 15.00 20.52 14.01 21.27 21.17 9.9 920.95 -20645 -10215 -5690 9204 21885 16139 37391 11203 29492 14035 9153 -3836 3790 2062 4328 28308 -4952 22618 13030 14767 -303 -16421 -15638 -22374 -18026 -32464 -448 -7779 10144 -3491 19902 13250 18410 20817 23405 22375 9247 20940 8943 9544 -7886 511 -8450 -1220 4575 13724 18885 10902 24163 4802 6960 -734 11052 -4191 -10604 -4082 -11203 -1715 -6118 -8624 -8069 7093 4161 2669 -9873 -3245 8064 -6538 -6267 -22574 -18287 -17790 1534 -270 3328 -1051 9458 11405 3093 9808 -5113 2967 -11269 -6843 -8812 -16201 -6214 -2976 6158 960 16790 7557 17397 1437 4949 2408 340 468 -1922 7004 8913 10594 -3221 8857 2195 2616 -1935 -2972 -2904 -9458 1370 -4620 1475 -2300 1547 -4008 1168 -4637 -5906 -701 -5708 -1981 258 781 -536 -278 513 -1799 878 2363 933 119 -354 1037 2928 -491 -971 -1930 -211 500 2114 3757 -965 -932 -1558 -1962 -1096 -837 1100 1677 1732 1375 1751 1718 1549 954 -564 372 221 451 1041 -861 832 871 691 -31 -2801 -1935 -2768 -1567 -5428 -16 -546 373 -455 1265 1950 2709 2993 2740 2170 1330 1190 837 670 -1160 48 -1328 -175 673 1744 2147 1787 1939 803 908 -115 924 -687 -2128 -655 -2248 -247 -1043 -1586 -1592 1070 842 619 -3196 -824 1216 -1419 -1130 -5979 -4305 -4908 322 -80 1041 -398 2957 3482 1149 2959 -2050 906 -4477 -2291 -2982 -6794 -2446 -1379 3058 632 8956 4753 8575 878 2676 1311 185 260 -1230 4329 6000 7639 -3116 7526 2123 2502 -1915 -2897 -2767 -9985 1270 -4894 1487 -2487 1514 -3907 976 -4145 -5626 -675 -6467 -2361 336 1126 -857 -477 930 -3554 1748 4650 1816 226 -655 1843 5020 -881 -1822 -4004 -486 1297 5941 11180 -3202 -3219 -5615
SS 20221128T224805.8Z 8367.950067 289 1 24.18 2 84.42 240.05 55.22 172.76 0.00 1 0.00 1 7 261 3.349e-01 3.540e-02 3.418e-01 3.555e-02 2.200877e-06 1.701699e-05 3.448578e-06 4.464382e-07 1.592614e-04 224.43 -2.00 3.32 -2.00 324.47 0.00e+00 -9.660296e-03 8.174349e-03 2.545739e-03 1.946411e-05 4.340654e-02 285.41 -2.00 20.00 -2.00 325.18 0.00e+00 1.620888e-02 1.142452e-02 7.045009e-04 3.059969e-05 7.729178e-02 285.41 -2.00 20.00 -2.00 323.91 0.00e+00 -6.093784e-03 2.735246e-02 2.341131e-03 1.948212e-05 8.286505e-02 285.41 -2.00 20.00 -2.00 324.30 0.00e+00 9.967615e-01 1.449318e-01 1.237520e-02 1.783852e-03 5.713250e-01 244.61 29.04 0.00 0.08 112.96 322.97 0.00e+00 -1.896152e-02 1.198732e-02 3.260845e-03 1.194443e-05 1.384316e-02 285.41 -2.00 20.00 -2.00 321.89 0.00e+00 9.029 0.010 303.00 329.40 4 4.6482e-01 2.3701e-01 9.1321e-02 2.2853e-03 1.6369e+00 1.6254e+00 5.3493e-01 5.0499e-02 3.6298e-04 1.7935e+00 -1.6983e+00 2.6742e-01 3.7490e-02 1.3326e-04 9.7796e-01 8.0005e-01 8.9125e-02 3.0879e-02 8.1449e-05 3.2307e-01 -6.2203e-02 4.6399e-02 3.1512e-03 6.7498e-05 2.0177e-01 1.6805e-05 1.1843e-01 1.0063e-06 3.3850e-08 6.1165e-11 3.6302e-07 -1.4379e-03 2.3865e-03 4.1596e-04 1.8674e-06 1.5386e-02 7.4005e-03 0.0000e+00 4.6501e+00 2.1704e+00 5.2745e-02 7.5400e-04 9.8503e+00 12 11 9 12 1 1 -119.99 20.87 0.76 0.00740 -0.00357 5 3 4 8 0 4000.000 15.00 20.87 27.22 21.58 21.48 10.3 1011.56 69585 -1495 -1262 5526 83615 77743 62897 65964 79057 107323 31514 13301 17415 -38347 -10946 8939 53081 71407 116575 -33 77647 -55352 -7234 -50194 -22228 -46615 -32564 68547 37919 68567 14658 98553 -23351 3649 38875 2313 -245 -8103 7088 118987 -21031 37197 -13376 23047 14930 4248 9691 52153 10872 58402 55156 66175 34418 -8627 -4032 -1802 -7478 4303 -2934 14849 27671 -10313 23321 3223 -12821 -16097 21120 -29536 8402 -11378 -15916 -12045 -9835 22073 2411 11584 6585 8956 4821 -3921 22122 3302 12936 11517 -15143 -16498 7399 -2969 -375 1744 1503 -3122 4613 7120 2125 4745 -2933 -7620 -813 -6480 2105 92 5574 999 2075 -2727 -2451 2710 -723 -4938 -5408 1952 -296 2780 6107 -1722 -2938 4473 -2610 -1701 -2037 -2519 4547 -2143 2491 1339 378 -129 -2269 1620 1023 -2789 499 1116 1410 698 -212 -402 -971 600 435 -393 1250 -793 -361 2732 -126 -110 465 3283 3271 3175 3330 3870 3941 2411 1180 1439 -5397 -1172 793 3086 3496 3924 -1 3089 -7791 -598 -6297 -2176 -5990 -3687 2936 2320 3357 1390 4523 -3930 491 3687 304 -32 -1066 759 4005 -2831 2845 -1801 2327 1782 611 1394 5106 1630 5897 5569 5791 4054 -1568 -719 -327 -1485 782 -592 2599 4563 -2708 4710 835 -3927 -4930 4194 -9046 1640 -2604 -3911 -3122 -2847 5349 795 3821 2460 3436 1996 -1795 7743 1356 4659 4031 -6728 -7552 2864 -1429 -202 1045 971 -2175 2934 4218 1266 2699 -1797 -5052 -539 -4907 1594 78 4859 978 2109 -2974 -2657 2773 -762 -5485 -6170 2115 -332 3022 6248 -1820 -3016 4155 -2617 -1774 -2290 -3129 5877 -3267 3957 2322 706 -254 -4757 3315 2070 -5679 948 2036 2529 1283 -415 -860 -2328 1581 1145 -1124 3722 -2496 -1163