File name: Pandora207s1_ArlingtonTX_20231126_L2Fit_fsus1c7d20230612p1-8.txt
File generation date: 20240823T135553.3Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c7p1-8
Local principal investigator: Yang Li
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 207
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora207_OF_v5d20210722.txt
Instrument calibration file used: Pandora207s1_CF_v7d20230612.txt
Level 1 file used: Pandora207s1_ArlingtonTX_20231126_L1_smca1c7d20230612p1-8.txt
Full location name: University Of Texas, Arlington Science Hall
Short location name: ArlingtonTX
Country of location: United States
Location latitude [deg]: 32.7316
Location longitude [deg]: -97.1142
Location altitude [m]: 15
Local noon date: 20231126
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 6, but with summer RefDay for AC on period.
First and last pixel inside fitting window: 207 351
Nominal wavelengths inside fitting window [nm]: 306.1165 306.2578 306.3990 306.5403 306.6815 306.8228 306.9640 307.1052 307.2464 307.3876 307.5287 307.6699 307.8111 307.9522 308.0933 308.2344 308.3755 308.5166 308.6577 308.7988 308.9398 309.0809 309.2219 309.3629 309.5040 309.6450 309.7859 309.9269 310.0679 310.2088 310.3498 310.4907 310.6316 310.7725 310.9134 311.0543 311.1952 311.3361 311.4769 311.6178 311.7586 311.8994 312.0402 312.1810 312.3218 312.4625 312.6033 312.7440 312.8848 313.0255 313.1662 313.3069 313.4476 313.5883 313.7289 313.8696 314.0102 314.1509 314.2915 314.4321 314.5727 314.7133 314.8539 314.9944 315.1350 315.2755 315.4160 315.5566 315.6971 315.8376 315.9780 316.1185 316.2590 316.3994 316.5398 316.6803 316.8207 316.9611 317.1015 317.2419 317.3822 317.5226 317.6629 317.8032 317.9436 318.0839 318.2242 318.3645 318.5047 318.6450 318.7852 318.9255 319.0657 319.2059 319.3461 319.4863 319.6265 319.7667 319.9068 320.0470 320.1871 320.3273 320.4674 320.6075 320.7476 320.8876 321.0277 321.1678 321.3078 321.4478 321.5879 321.7279 321.8679 322.0079 322.1478 322.2878 322.4277 322.5677 322.7076 322.8475 322.9874 323.1273 323.2672 323.4071 323.5470 323.6868 323.8266 323.9665 324.1063 324.2461 324.3859 324.5257 324.6654 324.8052 324.9449 325.0847 325.2244 325.3641 325.5038 325.6435 325.7832 325.9228 326.0625 326.2021 326.3417
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20231126T135318.6Z 8730.578688 243 1 47.47 2 82.47 120.92 106.06 308.25 0.00 1 0.00 1 7 258 3.787e-01 3.622e-02 3.465e-01 1.541e-02 -2.492537e-05 7.506279e-06 4.271596e-06 3.577900e-07 1.805772e-04 224.49 -2.00 3.32 -2.00 324.48 0.00e+00 -2.939118e-03 3.757721e-03 5.322456e-04 2.832143e-05 4.905543e-02 285.62 -2.00 20.00 -2.00 325.27 0.00e+00 1.151239e-02 5.176962e-03 2.582936e-03 2.488273e-05 8.760614e-02 285.62 -2.00 20.00 -2.00 323.92 0.00e+00 1.957642e-02 1.358289e-02 9.453636e-03 1.859154e-05 9.347157e-02 285.62 -2.00 20.00 -2.00 324.34 0.00e+00 7.691360e-01 6.828041e-02 3.625645e-02 1.397173e-03 6.339008e-01 237.32 18.35 0.00 0.07 166.38 323.28 0.00e+00 9.258261e-03 9.065804e-03 1.637064e-02 1.621223e-05 1.535279e-02 285.62 -2.00 20.00 -2.00 322.41 0.00e+00 7.071 0.005 303.00 329.40 4 1.4271e+00 1.0784e-01 1.0777e-01 1.8269e-03 1.8320e+00 2.7309e-01 2.7265e-01 2.5144e-01 3.1489e-04 1.9940e+00 -8.4234e-01 1.3743e-01 1.0564e-01 1.4062e-04 1.0977e+00 9.6554e-01 5.1584e-02 2.8936e-02 9.0666e-05 3.6072e-01 -3.4225e-01 2.6619e-02 1.7823e-02 7.0441e-05 2.2580e-01 5.4292e-05 2.3142e-02 7.1991e-07 9.0216e-08 1.1396e-10 2.9833e-07 3.8771e-03 1.1267e-03 4.2415e-04 1.4437e-06 1.7299e-02 3.2380e-03 0.0000e+00 -4.0491e+00 1.1738e+00 6.1238e-01 8.8651e-04 1.3783e+01 12 10 8 10 0 0 98.70 20.21 0.54 0.00324 0.03282 20 5 4 8 0 2372.870 15.00 20.21 8.66 20.87 20.67 17.1 834.55 67397 -13709 -15976 -5357 91915 26218 15885 51753 57914 52980 74666 208271 56143 143119 49130 60363 -13478 87581 -30751 52798 -46670 39379 -24919 3283 46986 -43231 144456 -10990 145137 -29256 17197 3048 -24363 16023 81962 58917 -25046 24533 2580 27944 -32838 -5201 -6347 3268 20406 -27790 6117 12629 -1647 -26512 17776 1558 -6758 16427 -1329 28122 -23583 -3846 -16422 15045 -5700 11061 -6169 665 13036 -2456 623 -14832 -6116 -8590 -15356 -3404 11112 7760 -3791 6009 2441 7724 1227 7758 607 5663 -7790 -14228 -437 -5986 -2852 -4474 2690 -1237 6840 3817 2601 4275 981 5284 3385 6169 -132 1071 -2911 1587 -606 2138 -1006 -37 1259 2236 6839 4311 -21510 5355 4909 1288 2471 2560 -438 10 -2662 -3349 -3003 7 -922 -180 -595 -93 1081 174 2224 -340 2362 -796 711 -1722 -2345 -562 695 1845 330 1550 -297 770 -862 -182 -755 1311 -534 -233 -176 1341 765 232 1448 1767 1757 1981 3040 1564 2089 1238 1281 -572 1278 -1346 911 -2043 731 -959 109 1122 -2638 2108 -481 2118 -1669 684 154 -1745 808 2175 1954 -1894 1107 144 1223 -2745 -352 -472 239 1354 -3171 519 1039 -157 -3521 1479 150 -720 1486 -159 2750 -4096 -567 -2828 1998 -1023 1840 -1314 138 2359 -487 109 -2771 -1000 -1504 -3272 -760 2530 2106 -1289 2026 908 2852 501 3012 249 2108 -3127 -5752 -152 -2350 -1224 -2279 1500 -819 4522 2674 1784 2683 598 3023 2011 3754 -91 780 -2430 1410 -606 2225 -1113 -40 1345 2363 7026 4737 -31736 6080 5473 1435 2593 2578 -438 10 -2619 -3514 -3471 9 -1308 -275 -991 -165 2018 342 4430 -702 4665 -1562 1297 -3054 -4140 -1019 1354 3926 789 4029 -857 2147 -2561 -554 -2383
SS 20231126T224803.8Z 8730.950044 510 1 19.55 2 84.30 240.47 90.89 62.66 0.00 1 0.00 1 0 209 1.421e-01 2.744e-02 2.412e-01 2.573e-02 5.339922e-05 1.315047e-05 2.763281e-06 3.577374e-07 6.777697e-05 224.48 -2.00 3.32 -2.00 324.58 0.00e+00 9.899412e-03 6.196941e-03 2.273194e-03 2.837179e-05 1.847349e-02 285.59 -2.00 20.00 -2.00 325.33 0.00e+00 2.280020e-02 8.820322e-03 1.017843e-03 2.456765e-05 3.294491e-02 285.59 -2.00 20.00 -2.00 324.05 0.00e+00 -7.453387e-03 2.261824e-02 2.614287e-03 1.787159e-05 3.511739e-02 285.59 -2.00 20.00 -2.00 324.44 0.00e+00 8.707415e-01 9.914467e-02 1.326731e-02 1.398148e-03 2.457107e-01 192.84 21.60 0.00 0.05 361.40 323.03 0.00e+00 -2.348141e-02 7.488701e-03 3.176706e-03 1.543481e-05 5.732671e-03 285.59 -2.00 20.00 -2.00 321.90 0.00e+00 8.883 0.010 303.00 329.40 4 -3.1300e-01 2.1961e-01 9.0579e-02 1.8299e-03 6.9915e-01 1.8962e+00 3.1184e-01 5.8130e-02 3.3026e-04 7.6511e-01 -1.6908e+00 1.6532e-01 3.8228e-02 1.2212e-04 4.2442e-01 5.1118e-01 7.1418e-02 2.6658e-02 5.8903e-05 1.3848e-01 3.6607e-02 3.4577e-02 2.3749e-03 4.2975e-05 8.4455e-02 3.8362e-05 5.0287e-01 9.2604e-02 5.0713e-09 2.5329e-11 1.5162e-07 -4.2787e-03 1.7474e-03 3.8766e-04 1.5950e-06 6.5003e-03 2.6623e-03 0.0000e+00 5.7168e+00 1.6842e+00 5.8203e-02 6.9511e-04 4.4197e+00 12 9 9 12 1 1 83.73 20.37 1.06 0.00266 -0.02998 8 5 4 8 0 2169.260 15.00 20.37 17.93 20.96 20.77 17.7 898.06 -28415 775 16615 19691 45463 26224 43154 24566 50485 313 25618 3294 7114 -662 4417 11245 6804 41630 -1786 25886 -12568 -7872 -19376 -19213 -11262 -16816 -14201 -6347 27461 -11825 21663 9986 21691 11800 29573 23716 11427 21616 -6522 13485 -22278 3978 -17695 8243 6403 12528 21660 21708 38223 -2209 16261 -5578 -321 -7572 -12483 -12465 -7477 1988 -8159 25421 -3072 12115 -1323 9616 27 -3198 2359 -7213 1097 -21418 -5294 -18208 -3826 -8787 6285 905 -3417 12215 253 10575 824 6258 -9258 -3579 -17003 -10570 -7785 -1348 6349 5285 10273 4324 10405 -962 617 544 -462 -39 -1054 3683 3609 9853 -136 7417 -944 1468 -1456 -3669 -756 -4645 -1668 -1693 1973 -3440 5054 -3543 -3787 -3960 -2624 -1520 570 30 -1906 378 -964 79 -914 -393 1444 83 333 -1104 3826 -255 3419 -2246 1303 -1551 -1013 710 1510 1686 -422 902 -2142 -3923 63 1080 1559 1200 2077 2007 2558 1454 54 1759 394 662 -73 430 946 738 1014 -249 1089 -1754 -820 -2404 -2170 -973 -1713 -1321 -478 669 -1545 1344 1305 2498 1908 2817 2311 1342 1436 -896 836 -3849 335 -3018 822 823 1770 2639 2803 2701 -457 1823 -965 -44 -1199 -2281 -2399 -1330 291 -1571 1920 -614 1978 -329 2038 7 -795 454 -1459 155 -4749 -864 -4658 -923 -2847 1792 313 -1349 3839 99 3427 303 1982 -3587 -1195 -6960 -4121 -3301 -618 3140 3090 6032 2792 5907 -593 349 296 -251 -22 -657 2396 2638 7395 -127 6741 -982 1477 -1476 -3719 -728 -4754 -1699 -1782 2024 -3771 4815 -3557 -3645 -3754 -2526 -1559 628 37 -2726 581 -1635 141 -1761 -790 2941 173 675 -2195 6909 -466 5932 -4236 2504 -3389 -2477 1741 4045 4875 -1318 2891 -7311