File name: Pandora132s1_Berlin_20220908_L2Fit_fout2c13d20210422p1-8.txt
File generation date: 20241123T181334.6Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c13p1-8
Local principal investigator: Thomas Ruhtz
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 132
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora132_OF_v1d20200910.txt
Instrument calibration file used: Pandora132s1_CF_v13d20210422.txt
Level 1 file used: Pandora132s1_Berlin_20220908_L1_smca1c13d20210422p1-8.txt
Full location name: Institute of Space Sciences FU Berlin
Short location name: Berlin
Country of location: Germany
Location latitude [deg]: 52.4600
Location longitude [deg]: 13.3100
Location altitude [m]: 100
Local noon date: 20220908
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 11, but different RefDay (April 2021).
First and last pixel inside fitting window: 243 385
Nominal wavelengths inside fitting window [nm]: 305.1071 305.2480 305.3889 305.5298 305.6707 305.8116 305.9524 306.0932 306.2341 306.3749 306.5157 306.6565 306.7973 306.9380 307.0788 307.2195 307.3603 307.5010 307.6417 307.7824 307.9231 308.0638 308.2044 308.3451 308.4857 308.6264 308.7670 308.9076 309.0482 309.1888 309.3293 309.4699 309.6104 309.7510 309.8915 310.0320 310.1725 310.3130 310.4534 310.5939 310.7344 310.8748 311.0152 311.1556 311.2960 311.4364 311.5768 311.7172 311.8575 311.9979 312.1382 312.2785 312.4188 312.5591 312.6994 312.8397 312.9800 313.1202 313.2604 313.4007 313.5409 313.6811 313.8213 313.9615 314.1016 314.2418 314.3819 314.5221 314.6622 314.8023 314.9424 315.0825 315.2225 315.3626 315.5026 315.6427 315.7827 315.9227 316.0627 316.2027 316.3427 316.4827 316.6226 316.7626 316.9025 317.0424 317.1823 317.3222 317.4621 317.6020 317.7418 317.8817 318.0215 318.1613 318.3012 318.4410 318.5807 318.7205 318.8603 319.0000 319.1398 319.2795 319.4192 319.5589 319.6986 319.8383 319.9780 320.1177 320.2573 320.3969 320.5366 320.6762 320.8158 320.9554 321.0949 321.2345 321.3741 321.5136 321.6531 321.7927 321.9322 322.0717 322.2111 322.3506 322.4901 322.6295 322.7689 322.9084 323.0478 323.1872 323.3266 323.4659 323.6053 323.7447 323.8840 324.0233 324.1627 324.3020 324.4413 324.5805 324.7198 324.8591 324.9983
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature in head sensor [°C], 999=no temperature signal
Column 97: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 98: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 99: Humidity in head sensor [%], -9=no humidity signal
Column 100: Pressure in head sensor [hPa], -9=no pressure signal
Columns 101-243: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 244-386: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20220908T171847.8Z 8286.721387 509 1 48.08 2 87.83 276.21 92.20 119.72 0.00 1 0.00 1 0 66 8.194e-01 4.140e-01 7.444e-01 4.027e-01 9.249508e-01 2.594251e-01 1.114636e-02 -6.000000e+00 5.596035e-01 229.53 -2.00 3.85 -2.00 316.83 0.00e+00 -3.631512e-02 2.858946e-02 9.770428e-04 -6.000000e+00 3.522922e-02 280.35 -2.00 20.00 -2.00 315.99 0.00e+00 15.573 0.084 302.00 328.00 3 -3.6106e+00 6.4435e-01 1.8168e-01 -6.0000e+00 1.3631e+00 2.9385e+00 7.4682e-01 7.1300e-02 -6.0000e+00 1.4913e+00 -2.0049e+00 4.1586e-01 2.3215e-02 -6.0000e+00 8.8976e-01 7.7502e-01 1.9265e-01 2.1454e-02 -6.0000e+00 3.7969e-01 7.8648e-07 1.1283e-02 1.1386e-02 9.0573e-05 -6.0000e+00 2.8952e-02 1.3567e-02 0.0000e+00 12 8 8 10 0 0 48.23 17.19 11.09 0.01357 0.09835 12 3 2 8 0 4000.000 15.00 17.19 24.34 21.38 21.88 26.9 996.34 166612 900000 900000 -31797 900000 900000 900000 -48012 -20914 900000 900000 151529 -11757 900000 49679 184038 -101308 900000 40299 900000 111041 228183 -52683 -46512 900000 900000 900000 900000 900000 21422 900000 900000 -89700 130040 -70644 900000 -90652 900000 900000 900000 900000 900000 900000 124028 28193 53542 900000 -59582 900000 900000 -14357 131676 -34624 255446 192342 900000 900000 54400 125957 158837 900000 900000 900000 900000 900000 900000 69413 -23162 15963 900000 -13304 900000 26766 900000 900000 68755 -52321 33593 900000 8036 77060 17021 900000 -75579 31830 -38084 27826 12797 11415 900000 -2658 45709 28376 5588 15076 76461 50368 -6537 240861 -31385 -6862 -5462 100520 -10741 66731 46115 -21791 104347 -7639 900000 -10486 109148 17780 -15594 14585 38903 15168 -29946 100201 911 3852 96535 50033 41702 -18919 30210 -22317 192926 24408 42674 -21369 -4665 25593 -1084 16636 -12018 50250 8219 64381 -24748 -16236 7579 900000 64686 900000 900000 -12345 900000 900000 900000 -29292 -10440 900000 900000 58830 -4891 900000 19288 71452 -92712 900000 15646 900000 43111 88591 -29220 -30560 900000 900000 900000 900000 900000 8317 900000 900000 -53578 50488 -29537 900000 -59561 900000 900000 900000 900000 900000 900000 48153 10946 20787 900000 -26691 900000 900000 -5574 51123 -17579 99176 74676 900000 900000 21121 48902 61668 900000 900000 900000 900000 900000 900000 26949 -12739 6714 900000 -8178 900000 10392 900000 900000 26694 -28777 13042 900000 3640 29918 8811 900000 -101573 16477 -40662 15305 7867 6648 900000 -1548 17746 12853 3616 10243 32160 30962 -7614 93513 -42648 -6438 -4594 39027 -10078 30226 26856 -26791 40512 -10380 900000 -17642 56502 22435 -26235 17460 36501 18648 -60069 55112 1297 4985 46849 37232 32381 -25708 24435 -32491 74903 29218 46943 -47704 -9357 40574 -2384 31755 -30716 68282 16487 68738 -58450 -32042 11280 900000