File name: Pandora132s1_Berlin_20230220_L2Fit_fsus1c13d20210422p1-8.txt
File generation date: 20241123T191055.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c13p1-8
Local principal investigator: Thomas Ruhtz
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 132
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora132_OF_v1d20200910.txt
Instrument calibration file used: Pandora132s1_CF_v13d20210422.txt
Level 1 file used: Pandora132s1_Berlin_20230220_L1_smca1c13d20210422p1-8.txt
Full location name: Institute of Space Sciences FU Berlin
Short location name: Berlin
Country of location: Germany
Location latitude [deg]: 52.4600
Location longitude [deg]: 13.3100
Location altitude [m]: 100
Local noon date: 20230220
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Modification of session 11, but different RefDay (April 2021).
First and last pixel inside fitting window: 250 395
Nominal wavelengths inside fitting window [nm]: 306.0932 306.2341 306.3749 306.5157 306.6565 306.7973 306.9380 307.0788 307.2195 307.3603 307.5010 307.6417 307.7824 307.9231 308.0638 308.2044 308.3451 308.4857 308.6264 308.7670 308.9076 309.0482 309.1888 309.3293 309.4699 309.6104 309.7510 309.8915 310.0320 310.1725 310.3130 310.4534 310.5939 310.7344 310.8748 311.0152 311.1556 311.2960 311.4364 311.5768 311.7172 311.8575 311.9979 312.1382 312.2785 312.4188 312.5591 312.6994 312.8397 312.9800 313.1202 313.2604 313.4007 313.5409 313.6811 313.8213 313.9615 314.1016 314.2418 314.3819 314.5221 314.6622 314.8023 314.9424 315.0825 315.2225 315.3626 315.5026 315.6427 315.7827 315.9227 316.0627 316.2027 316.3427 316.4827 316.6226 316.7626 316.9025 317.0424 317.1823 317.3222 317.4621 317.6020 317.7418 317.8817 318.0215 318.1613 318.3012 318.4410 318.5807 318.7205 318.8603 319.0000 319.1398 319.2795 319.4192 319.5589 319.6986 319.8383 319.9780 320.1177 320.2573 320.3969 320.5366 320.6762 320.8158 320.9554 321.0949 321.2345 321.3741 321.5136 321.6531 321.7927 321.9322 322.0717 322.2111 322.3506 322.4901 322.6295 322.7689 322.9084 323.0478 323.1872 323.3266 323.4659 323.6053 323.7447 323.8840 324.0233 324.1627 324.3020 324.4413 324.5805 324.7198 324.8591 324.9983 325.1375 325.2768 325.4160 325.5552 325.6944 325.8335 325.9727 326.1119 326.2510 326.3901
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230220T095027.8Z 8451.410044 162 1 49.15 2 66.29 155.76 71.59 153.57 0.00 1 0.00 1 0 49 1.382e-02 2.947e-03 1.531e-02 3.048e-03 -1.643971e-06 1.115887e-06 4.077213e-08 4.419186e-07 6.184592e-06 223.83 -2.00 3.85 -2.00 322.70 0.00e+00 1.173514e-03 4.303384e-04 2.668456e-05 4.207734e-05 1.607023e-03 266.51 -2.00 20.00 -2.00 322.98 0.00e+00 6.422685e-04 5.750336e-04 1.168169e-05 3.000609e-05 2.960620e-03 266.51 -2.00 20.00 -2.00 322.32 0.00e+00 1.130197e-03 9.994764e-04 1.958946e-04 1.177773e-05 2.927919e-03 266.51 -2.00 20.00 -2.00 322.54 0.00e+00 3.159651e-01 4.924969e-03 6.838670e-04 4.171500e-03 1.752628e-02 209.06 3.47 0.00 0.30 29.92 319.60 0.00e+00 2.150912e-05 3.567209e-04 1.577878e-04 2.270423e-05 4.276485e-04 266.51 -2.00 20.00 -2.00 318.75 0.00e+00 2.469 0.000 303.00 329.40 4 4.4465e+00 1.0021e-02 2.3580e-02 2.2683e-03 5.3914e-02 1.1729e-02 1.6682e-02 4.5721e-03 3.3009e-04 5.8101e-02 1.3913e-02 9.4325e-03 1.5702e-03 1.2282e-04 3.1633e-02 -2.3137e-02 5.6073e-03 3.6158e-04 8.3356e-05 1.2859e-02 9.0351e-03 3.2711e-03 1.3305e-04 8.2732e-05 9.0498e-03 4.2431e-04 -5.3638e-03 2.0857e-03 1.3128e-04 2.4256e-05 2.2009e-03 -1.1845e-04 9.9135e-05 4.4700e-06 9.5015e-07 4.2837e-04 -2.9503e-02 0.0000e+00 1.0081e+00 2.6208e-01 2.9300e-03 6.6641e-04 9.7462e-01 12 8 8 10 0 0 99.92 16.08 0.16 -0.02950 -0.03041 55 12 1 8 0 893.510 15.01 16.08 15.43 20.56 20.96 26.8 1033.73 -2647 4095 -4233 8378 1051 4735 65 -1658 1196 -3815 1798 -3179 536 -2055 2012 2104 1155 2315 896 2189 -3327 161 -2993 712 -752 1880 -2776 2323 1270 -1648 880 -54 231 -222 -455 -375 -781 1195 -744 463 763 -463 -525 468 -133 -255 834 -180 -762 -275 722 261 353 718 214 -369 -224 251 -500 231 -800 0 -524 -76 -296 111 281 162 606 -367 -49 -555 101 345 -392 260 -196 95 -354 227 93 114 390 -33 187 -439 -43 -322 166 -235 379 758 -3 343 -607 91 -222 191 -433 50 113 -278 272 -121 254 -213 56 68 -206 150 -412 -239 -306 324 -12 131 -46 -227 -275 -339 442 -340 152 3 246 -55 -3 -6 167 50 104 37 -356 188 32 3 154 -235 -88 -133 337 268 -81 88 -134 -187 -132 213 -252 452 63 312 5 -153 119 -423 197 -381 64 -257 241 259 152 322 132 317 -484 22 -412 101 -119 315 -510 392 215 -313 190 -14 69 -74 -158 -134 -282 422 -269 164 265 -162 -187 174 -54 -110 376 -85 -369 -135 349 124 167 350 113 -214 -138 155 -292 126 -438 0 -347 -54 -200 82 196 105 353 -197 -26 -312 64 249 -314 202 -160 82 -328 218 91 111 363 -29 162 -357 -35 -279 160 -231 407 859 -3 357 -585 91 -209 194 -470 56 134 -350 364 -172 363 -295 73 81 -234 171 -493 -304 -412 440 -16 169 -57 -266 -339 -402 529 -444 195 4 342 -79 -5 -9 277 85 180 64 -601 301 50 5 244 -401 -162 -267 723 560 -176 193 -294 -407
SS 20230220T100642.9Z 8451.421330 171 1 49.47 2 65.35 160.01 70.53 157.44 0.00 1 0.00 1 0 49 6.536e-03 1.829e-03 5.056e-03 1.183e-03 1.724529e-08 4.283527e-07 1.516139e-08 4.418672e-07 2.944003e-06 223.83 -2.00 3.85 -2.00 322.45 0.00e+00 6.145958e-04 1.642065e-04 1.825378e-05 4.212676e-05 7.646130e-04 266.51 -2.00 20.00 -2.00 322.71 0.00e+00 1.467767e-04 2.216557e-04 2.939717e-06 2.998911e-05 1.397842e-03 266.51 -2.00 20.00 -2.00 322.15 0.00e+00 1.740368e-04 3.752487e-04 3.295606e-05 1.149244e-05 1.385174e-03 266.51 -2.00 20.00 -2.00 322.32 0.00e+00 3.037516e-01 1.891772e-03 8.976716e-05 4.172192e-03 8.282625e-03 212.46 1.40 0.00 0.31 14.17 319.27 0.00e+00 -2.462280e-05 1.256858e-04 1.255980e-05 2.271464e-05 2.001209e-04 266.51 -2.00 20.00 -2.00 318.45 0.00e+00 2.382 0.000 303.00 329.40 4 3.0671e+00 3.9551e-03 2.2711e-02 2.2682e-03 2.5498e-02 1.0288e-02 6.4408e-03 2.3882e-03 3.2873e-04 2.7513e-02 5.8917e-04 3.6195e-03 2.5832e-04 1.2251e-04 1.5009e-02 -7.7471e-03 1.9927e-03 1.0058e-04 7.3027e-05 6.0916e-03 4.4375e-03 1.1851e-03 2.2900e-05 7.8136e-05 4.1925e-03 1.8820e-03 -1.6789e-03 8.3922e-04 4.9069e-05 2.2103e-05 1.1765e-03 9.9016e-05 3.7134e-05 2.0808e-06 9.6547e-07 2.0265e-04 -2.9138e-02 0.0000e+00 3.2579e-01 1.0324e-01 1.5554e-03 4.7723e-04 4.7170e-01 12 8 8 10 0 0 99.49 16.11 0.25 -0.02914 -0.02838 154 33 1 8 0 320.940 14.98 16.11 15.71 20.56 20.96 26.8 1034.86 -2424 2083 -479 1195 1410 109 1026 -1811 1181 -1785 1076 -2161 1244 115 114 961 -496 1433 -1281 1045 -2182 857 405 761 820 -589 735 -1254 1817 -975 826 74 -181 196 -332 243 -585 426 -470 -94 -108 -57 -184 -153 293 -515 395 -442 673 56 29 192 -77 93 -195 -55 -76 349 -411 729 -157 -266 -82 -332 487 -254 245 8 123 -16 -289 -170 60 50 -39 187 -246 146 -8 -29 -70 -27 176 -179 235 -531 96 -262 101 62 35 80 -13 237 -116 -15 -128 143 -236 62 115 -73 150 -100 158 -17 90 -95 -155 235 -274 54 -155 74 50 218 -51 -220 81 -395 185 -53 57 -38 2 90 -94 17 -112 57 121 15 -254 232 -8 -60 145 -111 134 -124 92 -5 -4 97 -128 -7 -144 132 -33 82 100 9 96 -199 139 -229 139 -301 172 16 16 139 -77 234 -223 177 -362 131 62 123 146 -115 148 -247 343 -207 201 22 -62 73 -130 97 -237 170 -190 -37 -42 -22 -73 -64 131 -246 179 -209 322 28 16 101 -40 50 -103 -32 -47 215 -238 429 -84 -153 -53 -236 356 -185 169 5 78 -9 -164 -103 41 35 -30 157 -217 136 -8 -30 -75 -28 178 -168 200 -424 75 -221 95 65 41 90 -16 264 -118 -15 -130 157 -275 76 146 -91 198 -140 223 -23 114 -121 -187 283 -348 68 -205 99 66 300 -67 -276 97 -455 216 -67 79 -50 2 125 -137 26 -182 95 203 25 -417 363 -12 -89 225 -184 242 -225 178 -10 -8 209 -276 -14
SS 20230220T101139.2Z 8451.424759 174 1 15.00 2 65.10 161.32 70.23 158.63 0.00 1 0.00 1 0 49 6.989e-03 2.035e-03 5.873e-03 1.751e-03 -6.772612e-07 6.385332e-07 1.842279e-08 4.418081e-07 3.140667e-06 223.83 -2.00 3.85 -2.00 322.06 0.00e+00 7.221126e-04 2.358755e-04 1.026492e-05 4.210365e-05 8.178556e-04 266.51 -2.00 20.00 -2.00 322.05 0.00e+00 5.346873e-04 3.212657e-04 3.834443e-06 2.998712e-05 1.495149e-03 266.51 -2.00 20.00 -2.00 321.85 0.00e+00 2.655915e-04 5.023604e-04 4.987860e-05 1.107727e-05 1.481443e-03 266.51 -2.00 20.00 -2.00 321.93 0.00e+00 3.026293e-01 2.589517e-03 1.431297e-04 4.173868e-03 8.848839e-03 211.05 1.93 0.00 0.32 15.16 318.63 0.00e+00 -1.334645e-04 1.613328e-04 5.510478e-06 2.275168e-05 2.118181e-04 266.51 -2.00 20.00 -2.00 317.85 0.00e+00 2.360 0.000 303.00 329.40 4 3.0987e+00 5.6721e-03 2.2500e-02 2.2687e-03 2.7227e-02 8.9858e-03 8.6747e-03 2.4066e-03 3.2886e-04 2.9421e-02 -2.1301e-04 4.9144e-03 3.0197e-04 1.1849e-04 1.6043e-02 -3.7340e-03 2.6675e-03 1.4197e-04 6.2160e-05 6.4226e-03 1.9981e-03 1.6463e-03 4.9441e-05 7.0680e-05 4.4310e-03 1.8615e-03 -7.4878e-04 1.1042e-03 5.6962e-05 1.8173e-05 1.2234e-03 6.8800e-05 5.3327e-05 2.3421e-06 9.4605e-07 2.1681e-04 -2.9045e-02 0.0000e+00 5.0640e-01 1.5056e-01 3.6404e-04 4.5738e-04 5.0149e-01 12 9 9 12 1 1 97.09 16.11 0.22 -0.02904 -0.02852 35 25 1 8 0 411.730 14.96 16.11 15.96 20.67 20.96 26.8 1035.64 2865 -1856 1304 -3326 3020 -3280 665 597 -225 1339 -207 149 -1520 932 -1204 -962 -761 -323 -260 -369 775 -275 1018 723 791 514 137 460 -154 672 -203 860 -128 435 88 -512 -188 -503 -106 -283 794 -692 -210 91 -558 258 117 361 5 561 -166 122 7 -51 309 78 291 -567 -169 345 -105 -261 -97 -94 -207 -122 137 278 -263 46 -259 -12 236 -170 356 -150 17 -311 260 41 -92 157 -211 109 35 -19 -80 -77 -270 -248 229 -13 232 79 -65 -114 57 22 -269 224 111 76 19 172 -30 0 55 -119 78 117 -162 -85 98 -23 -23 181 -158 -187 -53 -7 112 107 -406 418 -189 65 -231 -19 62 -175 415 -32 -154 95 -120 -16 69 27 52 -240 122 58 -79 220 -10 -124 217 -164 118 -319 283 -370 84 86 -33 203 -33 25 -263 161 -211 -172 -144 -65 -55 -77 151 -51 205 155 170 120 33 108 -36 170 -60 303 -53 179 38 -228 -84 -224 -47 -124 370 -325 -100 42 -278 135 64 206 3 332 -98 71 4 -30 197 54 198 -393 -118 224 -68 -182 -71 -74 -170 -100 106 199 -185 29 -162 -8 178 -135 311 -141 15 -302 267 44 -102 171 -222 105 33 -17 -70 -72 -263 -271 256 -15 269 92 -69 -116 59 25 -304 262 137 99 24 237 -41 1 73 -147 90 137 -198 -111 135 -33 -32 240 -202 -226 -65 -9 134 130 -538 579 -270 89 -332 -29 98 -287 645 -51 -250 147 -180 -23 106 45 88 -437 225 113 -151 426 -20 -238