File name: Pandora21s1_Bremen_20230629_L2Fit_fout2c6d20211128p1-8.txt
File generation date: 20240904T225652.2Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c6p1-8
Local principal investigator: Tom Hanisco
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 21
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora21_OF_v4d20190904.txt
Instrument calibration file used: Pandora21s1_CF_v6d20211128.txt
Level 1 file used: Pandora21s1_Bremen_20230629_L1_smca1c6d20211128p1-8.txt
Full location name: Bremen University
Short location name: Bremen
Country of location: Germany
Location latitude [deg]: 53.0813
Location longitude [deg]: 8.8126
Location altitude [m]: 50
Local noon date: 20230629
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 286 428
Nominal wavelengths inside fitting window [nm]: 305.0476 305.1881 305.3286 305.4691 305.6096 305.7501 305.8905 306.0309 306.1714 306.3118 306.4522 306.5926 306.7329 306.8733 307.0137 307.1540 307.2943 307.4346 307.5749 307.7152 307.8555 307.9958 308.1361 308.2763 308.4165 308.5568 308.6970 308.8372 308.9774 309.1176 309.2577 309.3979 309.5380 309.6781 309.8183 309.9584 310.0985 310.2386 310.3786 310.5187 310.6587 310.7988 310.9388 311.0788 311.2188 311.3588 311.4988 311.6387 311.7787 311.9186 312.0586 312.1985 312.3384 312.4783 312.6182 312.7581 312.8979 313.0378 313.1776 313.3174 313.4572 313.5970 313.7368 313.8766 314.0164 314.1561 314.2959 314.4356 314.5753 314.7150 314.8547 314.9944 315.1341 315.2737 315.4134 315.5530 315.6927 315.8323 315.9719 316.1115 316.2510 316.3906 316.5302 316.6697 316.8092 316.9487 317.0883 317.2277 317.3672 317.5067 317.6462 317.7856 317.9250 318.0645 318.2039 318.3433 318.4827 318.6220 318.7614 318.9008 319.0401 319.1794 319.3187 319.4581 319.5973 319.7366 319.8759 320.0152 320.1544 320.2936 320.4329 320.5721 320.7113 320.8505 320.9896 321.1288 321.2679 321.4071 321.5462 321.6853 321.8244 321.9635 322.1026 322.2417 322.3807 322.5198 322.6588 322.7978 322.9368 323.0758 323.2148 323.3538 323.4927 323.6317 323.7706 323.9095 324.0484 324.1873 324.3262 324.4651 324.6040 324.7428 324.8817
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230629T151847.0Z 8580.638044 506 1 49.81 2 52.36 258.60 92.77 118.27 0.00 1 0.00 1 0 17 1.386e-02 5.682e-03 1.024e-02 3.284e-03 2.366355e-01 1.747948e-03 3.144253e-03 -6.000000e+00 8.473687e-03 233.82 -2.00 3.88 -2.00 317.36 0.00e+00 4.708011e-04 2.258550e-04 5.507498e-05 -6.000000e+00 3.321871e-04 281.28 -2.00 20.00 -2.00 317.04 0.00e+00 1.634 0.000 302.00 328.00 3 5.8318e+00 4.6559e-03 2.1559e-02 -6.0000e+00 2.1513e-02 4.6124e-02 5.1630e-03 1.3823e-02 -6.0000e+00 2.3240e-02 2.3893e-03 3.1230e-03 6.7573e-03 -6.0000e+00 1.3597e-02 -2.9830e-03 1.5145e-03 1.8907e-03 -6.0000e+00 5.6023e-03 2.2479e-04 -2.6303e-04 1.0338e-04 2.3670e-05 -6.0000e+00 4.1631e-04 -1.2912e-02 0.0000e+00 10 0 0 10 0 0 99.60 22.52 0.12 -0.01291 -0.01489 20 4 1 5 0 2489.967 25.58 20.01 22.52 27.15 33.7 1014.39 -2202 -195 -1873 2880 -5394 -206 -5798 2241 -1737 -4998 -2662 1438 -143 -1285 4448 -180 3318 -1307 3602 -1900 1639 -467 -540 1531 -2242 -72 -1720 1027 -848 1129 -1086 2395 2539 -1154 -1868 -2445 -844 -984 -245 -387 423 -546 65 -673 -994 234 -2072 -432 -1511 1896 1099 475 882 -189 1325 714 783 -325 817 312 1421 1323 1231 1165 262 107 -553 1019 -145 369 164 434 352 -91 -141 -588 -516 -1091 -104 -1649 -128 -1439 -1008 -1196 -859 -526 -398 46 200 607 -96 552 -244 495 199 429 481 695 72 -735 95 -778 -315 54 -1131 -132 -773 196 -177 475 397 463 74 147 -84 353 243 -400 -70 -101 -169 -279 349 -323 793 178 300 675 -235 205 375 128 -81 174 -177 -83 71 449 5 -193 17 -734 -221 -246 -23 -236 332 -619 -21 -649 255 -226 -711 -374 198 -22 -222 821 -38 717 -306 834 -478 409 -119 -140 403 -644 -21 -511 286 -227 287 -289 659 745 -363 -576 -738 -264 -350 -102 -185 222 -305 37 -394 -584 136 -1214 -243 -843 1021 614 282 550 -125 890 493 549 -231 569 217 995 975 970 971 224 88 -425 741 -109 302 146 408 336 -85 -126 -490 -392 -781 -74 -1279 -108 -1347 -1006 -1254 -945 -613 -488 58 255 760 -115 613 -252 482 197 450 550 863 95 -997 124 -962 -368 63 -1389 -170 -1044 272 -257 715 625 745 118 225 -121 474 317 -533 -98 -148 -258 -429 527 -477 1118 241 391 855 -308 281 539 190 -123 268 -284 -140 124 791 9 -343 29 -1252 -366