File name: Pandora21s1_Bremen_20250113_L2Fit_fout2c7d20231020p1-8.txt
File generation date: 20250114T020032.2Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c7p1-8
Local principal investigator: Tom Hanisco
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 21
Spectrometer number: 1
Processing software version used: BlickP v1.8.70
Instrument operation file used: Pandora21_OF_v4d20190904.txt
Instrument calibration file used: Pandora21s1_CF_v7d20231020.txt
Level 1 file used: Pandora21s1_Bremen_20250113_L1_smca1c7d20231020p1-8.txt
Full location name: Bremen University
Short location name: Bremen
Country of location: Germany
Location latitude [deg]: 53.0813
Location longitude [deg]: 8.8126
Location altitude [m]: 50
Local noon date: 20250113
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 287 429
Nominal wavelengths inside fitting window [nm]: 305.1299 305.2716 305.4132 305.5548 305.6963 305.8379 305.9793 306.1208 306.2622 306.4035 306.5448 306.6861 306.8274 306.9686 307.1098 307.2510 307.3921 307.5332 307.6742 307.8153 307.9563 308.0972 308.2382 308.3791 308.5199 308.6608 308.8016 308.9424 309.0831 309.2239 309.3646 309.5053 309.6459 309.7865 309.9271 310.0677 310.2082 310.3487 310.4892 310.6297 310.7701 310.9106 311.0509 311.1913 311.3317 311.4720 311.6123 311.7525 311.8928 312.0330 312.1732 312.3134 312.4536 312.5937 312.7338 312.8739 313.0140 313.1540 313.2941 313.4341 313.5741 313.7140 313.8540 313.9939 314.1338 314.2737 314.4136 314.5534 314.6933 314.8331 314.9729 315.1127 315.2524 315.3922 315.5319 315.6716 315.8113 315.9510 316.0906 316.2303 316.3699 316.5095 316.6491 316.7886 316.9282 317.0677 317.2073 317.3468 317.4863 317.6257 317.7652 317.9046 318.0441 318.1835 318.3229 318.4623 318.6016 318.7410 318.8803 319.0196 319.1589 319.2982 319.4375 319.5768 319.7160 319.8553 319.9945 320.1337 320.2729 320.4121 320.5513 320.6904 320.8296 320.9687 321.1078 321.2469 321.3860 321.5251 321.6641 321.8032 321.9422 322.0812 322.2202 322.3592 322.4982 322.6372 322.7762 322.9151 323.0540 323.1930 323.3319 323.4708 323.6096 323.7485 323.8874 324.0262 324.1651 324.3039 324.4427 324.5815 324.7203 324.8591 324.9978
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20250113T144709.4Z 9144.616081 4 1 49.77 2 85.40 224.31 89.37 44.67 0.00 1 0.00 1 0 25 7.890e-01 1.099e-01 5.577e-01 8.388e-02 8.731533e-01 4.982308e-02 1.126672e-02 -6.000000e+00 4.830994e-01 221.32 -2.00 3.88 -2.00 321.58 0.00e+00 1.859059e-02 1.545583e-02 5.818236e-04 -6.000000e+00 2.585961e-02 265.87 -2.00 20.00 -2.00 321.23 0.00e+00 10.467 0.026 302.00 328.00 3 2.1303e-01 1.4971e-01 1.1608e-01 -6.0000e+00 1.1880e+00 2.1051e+00 1.6854e-01 4.8582e-02 -6.0000e+00 1.3182e+00 -1.8265e+00 1.0428e-01 2.4072e-02 -6.0000e+00 7.5808e-01 6.4301e-01 5.9069e-02 7.3793e-03 -6.0000e+00 3.2015e-01 3.8974e-06 -6.2989e-03 2.5257e-03 1.1538e-04 -6.0000e+00 2.5975e-02 8.2424e-04 0.0000e+00 12 8 8 10 0 0 37.63 22.83 2.92 0.00082 -0.04651 16 3 1 5 0 3109.030 25.90 19.99 22.83 11.23 35.7 1054.57 900000 900000 -68087 900000 900000 900000 76371 900000 127184 118770 -33020 900000 900000 143235 900000 91455 292823 -37553 114928 -37559 99176 900000 -25741 900000 900000 900000 900000 900000 900000 78670 189662 900000 900000 100274 900000 125914 197951 56292 900000 113731 77047 -72773 299422 900000 900000 21814 -54729 109369 900000 900000 32671 88927 154498 226533 900000 7958 900000 144127 138061 153799 5096 -78900 -14409 94249 54522 122611 31106 93658 136588 54315 34257 50448 143502 -31944 61403 -21812 52442 53786 21752 43142 27788 -28619 11631 18204 -6620 62480 141 -8726 -9890 16501 -4033 11134 -3515 -30382 24332 -12731 9785 -6019 4462 5219 17021 4159 -12028 3809 -10121 -10436 -19241 27319 4530 4579 -6965 13864 -3097 -1954 -11946 -3814 -422 6392 11441 2106 23187 -4968 1428 -6616 494 9903 -1033 17068 -10522 6521 -3280 -2831 4207 -2292 1922 -1802 -2081 -549 2812 -1706 -3646 3079 3154 900000 900000 -15229 900000 900000 900000 6211 900000 10344 9660 -2686 900000 900000 11650 900000 7438 23816 -7774 9347 -7220 8066 900000 -3236 900000 900000 900000 900000 900000 900000 6398 15426 900000 900000 8156 900000 10241 16100 4578 900000 9250 6266 -22061 24353 900000 900000 2581 -14163 8895 900000 900000 4348 7956 12566 18425 900000 1530 900000 11722 11229 12509 953 -34419 -3729 9965 8869 9972 6325 10664 11109 11044 8916 11078 11671 -12282 8989 -6564 7251 7874 5130 9825 8588 -15871 5109 7847 -3475 18802 74 -5033 -5631 7516 -2099 4709 -1715 -19095 11280 -9225 6656 -5474 3926 4515 12081 2983 -9249 2727 -7933 -8643 -18495 19775 4221 4875 -9322 16094 -4328 -2644 -17224 -4963 -540 7987 14211 2911 25202 -6796 1753 -8512 631 11195 -1302 19434 -16572 9980 -6184 -5757 8524 -5305 4534 -4597 -5416 -1413 6881 -4149 -8384 6147 6086