File name: Pandora162s1_Brussels-Uccle_20250107_L2Fit_fsus1c13d20231120p1-8.txt
File generation date: 20250108T000957.2Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c13p1-8
Local principal investigator: Michel Van Roozendael
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 162
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora162_OF_v8d20191031.txt
Instrument calibration file used: Pandora162s1_CF_v13d20231120.txt
Level 1 file used: Pandora162s1_Brussels-Uccle_20250107_L1_smca1c13d20231120p1-8.txt
Full location name: Uccle (BIRA-IASB, KMI-IRM)
Short location name: Brussels-Uccle
Country of location: Belgium
Location latitude [deg]: 50.7980
Location longitude [deg]: 4.3580
Location altitude [m]: 107
Local noon date: 20250107
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Based on session 12 for fieldcal
First and last pixel inside fitting window: 233 377
Nominal wavelengths inside fitting window [nm]: 306.1387 306.2793 306.4200 306.5606 306.7012 306.8419 306.9825 307.1231 307.2637 307.4042 307.5448 307.6853 307.8259 307.9664 308.1069 308.2474 308.3879 308.5284 308.6689 308.8093 308.9498 309.0902 309.2306 309.3710 309.5114 309.6518 309.7922 309.9326 310.0729 310.2133 310.3536 310.4939 310.6342 310.7745 310.9148 311.0551 311.1953 311.3356 311.4758 311.6161 311.7563 311.8965 312.0367 312.1769 312.3170 312.4572 312.5973 312.7375 312.8776 313.0177 313.1578 313.2979 313.4380 313.5780 313.7181 313.8581 313.9982 314.1382 314.2782 314.4182 314.5582 314.6982 314.8381 314.9781 315.1180 315.2579 315.3978 315.5378 315.6776 315.8175 315.9574 316.0973 316.2371 316.3769 316.5168 316.6566 316.7964 316.9362 317.0759 317.2157 317.3555 317.4952 317.6349 317.7746 317.9144 318.0541 318.1937 318.3334 318.4731 318.6127 318.7524 318.8920 319.0316 319.1712 319.3108 319.4504 319.5899 319.7295 319.8690 320.0086 320.1481 320.2876 320.4271 320.5666 320.7061 320.8455 320.9850 321.1244 321.2638 321.4033 321.5427 321.6821 321.8214 321.9608 322.1002 322.2395 322.3788 322.5182 322.6575 322.7968 322.9361 323.0753 323.2146 323.3539 323.4931 323.6323 323.7715 323.9108 324.0499 324.1891 324.3283 324.4675 324.6066 324.7457 324.8849 325.0240 325.1631 325.3022 325.4412 325.5803 325.7194 325.8584 325.9974 326.1365 326.2755
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20250107T093554.5Z 9138.399937 138 1 25.03 2 78.77 148.85 103.15 55.84 0.00 1 0.00 1 0 209 1.427e-01 2.192e-02 4.230e-01 2.646e-02 1.378925e-05 1.119937e-05 1.361171e-06 4.167244e-07 5.962089e-05 221.55 -2.00 3.79 -2.00 324.18 0.00e+00 2.400445e-03 5.300844e-03 1.928897e-03 2.475065e-05 1.627523e-02 267.61 -2.00 20.00 -2.00 325.00 0.00e+00 7.588894e-03 7.218728e-03 2.671771e-03 2.868982e-05 3.034191e-02 267.61 -2.00 20.00 -2.00 323.60 0.00e+00 5.632230e-03 1.524482e-02 2.317306e-03 1.644784e-05 3.007666e-02 267.61 -2.00 20.00 -2.00 324.03 0.00e+00 7.068114e-01 6.854101e-02 5.106293e-03 3.670572e-03 1.811750e-01 213.36 21.54 0.00 0.12 306.19 322.76 0.00e+00 -1.264753e-02 9.322863e-03 1.261719e-02 2.950936e-05 4.390498e-03 267.61 -2.00 20.00 -2.00 321.92 0.00e+00 4.962 0.003 303.00 329.40 4 4.3947e+00 1.1946e-01 7.2558e-02 2.1603e-03 5.5010e-01 5.0490e-01 2.4864e-01 1.2152e-01 3.3471e-04 5.9573e-01 -8.6310e-01 1.3535e-01 6.2100e-02 1.5860e-04 3.2280e-01 6.5035e-01 7.2671e-02 1.8278e-02 1.1060e-04 1.0965e-01 -1.6845e-01 4.6055e-02 6.3391e-04 9.5126e-05 8.2779e-02 2.5374e-05 1.6624e-01 4.7543e-02 1.0625e-07 3.6680e-11 1.5151e-07 -3.0605e-03 1.0947e-03 1.5387e-04 1.1950e-06 4.1688e-03 1.3033e-02 0.0000e+00 1.2047e+00 1.4613e+00 8.0935e-02 8.0531e-04 6.1332e+00 12 9 9 12 1 1 99.99 18.42 0.75 0.01303 -0.01032 9 4 2 8 0 2501.800 15.04 18.42 8.51 20.87 21.38 1.8 869.60 7211 -13954 -11533 -4584 -2010 28446 27161 29651 5211 20276 -5626 37991 13089 16449 -30203 1251 1009 5864 8988 11917 11209 -44477 -22357 -11231 -19388 -23564 503 -19523 -19646 -19213 10684 9787 29555 37461 57500 18921 50483 -7226 -10068 -13475 6275 19078 -9546 7815 13823 12902 18378 19355 30954 3984 2737 -3405 -17839 4518 -7239 26198 406 -1099 5275 -421 -4388 -4208 7292 3734 6466 13935 1070 29587 -16966 -11806 4040 6745 -2730 -2485 -4483 5444 3144 4230 -3937 5472 -6185 -2563 -6229 -5585 -5202 -16119 -5477 873 3871 -1552 5487 3187 2174 -415 -3883 -4126 -6898 -1481 3138 -1816 5118 4134 -243 2787 3314 696 -2104 418 -2490 297 2129 -1298 -527 2446 1782 -46 -896 30 -1535 208 -813 -2185 753 -30 -1446 -1090 -708 -321 1111 -539 -453 358 -390 226 4076 -1116 -999 1782 -1725 843 -213 1174 -1172 915 -583 181 -591 -453 -126 -55 713 681 743 248 554 -318 952 328 412 -1868 37 41 234 300 299 281 -2482 -680 -320 -949 -1504 15 -810 -822 -1065 409 626 1614 1911 1491 1381 1265 -700 -966 -1311 410 968 -1012 714 1317 1414 2056 2300 3168 636 412 -500 -3024 556 -1230 3099 80 -224 930 -82 -971 -1088 1905 1096 1844 3375 273 4279 -4123 -2572 764 1500 -856 -928 -1976 2308 1433 2028 -2163 2763 -3542 -1360 -3217 -2635 -2320 -8185 -2719 476 2400 -1188 4410 2749 1813 -323 -2786 -2791 -5050 -1108 2336 -1525 4339 3941 -274 3325 4076 865 -2570 469 -2820 336 2490 -1650 -674 2940 2059 -52 -978 31 -1570 208 -900 -2819 1056 -47 -2388 -1889 -1302 -625 2212 -1100 -930 710 -732 396 6484 -1865 -1780 3400 -3782 1970 -553 3254 -3501 2769 -1801
SS 20250107T095108.8Z 9138.410518 146 1 46.71 2 77.59 152.24 101.14 58.90 0.00 1 0.00 1 0 193 1.246e-01 1.274e-02 4.169e-01 1.435e-02 5.478366e-06 6.271044e-06 2.643455e-06 4.167374e-07 5.199647e-05 221.55 -2.00 3.79 -2.00 324.22 0.00e+00 5.890305e-03 2.992496e-03 1.723540e-03 2.474325e-05 1.422118e-02 267.61 -2.00 20.00 -2.00 325.02 0.00e+00 1.660941e-03 3.999394e-03 9.321247e-04 2.885230e-05 2.652214e-02 267.61 -2.00 20.00 -2.00 323.61 0.00e+00 1.621133e-02 8.381205e-03 1.576381e-03 1.615690e-05 2.625400e-02 267.61 -2.00 20.00 -2.00 324.04 0.00e+00 6.749023e-01 3.712617e-02 4.945705e-03 3.669480e-03 1.584474e-01 211.85 12.30 0.00 0.13 265.48 322.80 0.00e+00 2.318718e-03 5.922109e-03 3.388662e-03 2.945283e-05 3.842844e-03 267.61 -2.00 20.00 -2.00 322.01 0.00e+00 4.523 0.002 303.00 329.40 4 3.6998e+00 6.4620e-02 4.6477e-02 2.1604e-03 4.7980e-01 2.3554e-01 1.3748e-01 3.0151e-02 3.3190e-04 5.1979e-01 -6.3918e-01 8.2085e-02 2.6796e-02 1.5805e-04 2.8152e-01 6.8627e-01 4.9708e-02 2.8704e-02 1.4902e-04 9.5573e-02 -2.6646e-01 2.7926e-02 6.3728e-03 1.1510e-04 7.2745e-02 7.3055e-05 1.1491e-01 2.3664e-02 6.0118e-09 3.8456e-10 1.3735e-07 -8.6504e-05 5.9301e-04 1.2175e-04 1.1982e-06 3.8081e-03 -7.4475e-03 0.0000e+00 4.0799e-01 8.5662e-01 4.0669e-02 8.8283e-04 5.7450e+00 12 9 9 12 1 1 100.00 18.40 0.24 -0.00745 -0.00811 151 33 2 8 0 307.070 15.02 18.40 8.75 20.87 21.38 1.8 871.33 -20360 -2085 -44248 -9082 -10977 7466 22552 25749 43658 20942 41392 22526 30651 -12571 16667 -7083 17124 2757 -441 -150 -26974 -11954 -30121 10037 -31887 -323 -27175 70 -10234 -692 16303 -13741 31742 1956 34791 1287 34276 -9034 10056 4808 5132 6907 606 8389 -5091 11752 2695 22054 11475 12660 4874 6225 5091 4004 8814 -2979 16605 -5124 2954 -4344 2432 -401 1171 8997 1211 1477 -8775 4218 -12189 3620 -8103 -3081 -1677 3538 3348 -2429 1768 -3464 -1079 356 600 -3852 922 -4659 -3954 -4139 -5643 -61 -957 1904 79 1149 115 689 673 -1397 1201 -2231 4089 -1534 1793 -1286 1664 1061 1110 263 49 799 -1052 1532 -2655 69 -907 1525 1092 2751 -476 -1480 -527 -2495 1675 -1453 1086 -1346 622 -655 -309 -251 54 585 -376 866 -1684 1267 -816 549 -463 594 68 -640 611 126 192 -347 46 -405 -28 -1579 -123 -149 101 306 350 593 443 562 345 416 -438 226 -156 233 37 -6 -2 -515 -162 -765 136 -1665 -9 -1426 1 -245 -16 337 -967 992 139 1208 95 1104 -734 565 300 331 457 50 703 -599 1172 336 2124 1333 1436 581 674 549 473 1136 -533 2567 -1066 528 -859 468 -92 306 2281 339 389 -2354 848 -2683 637 -1822 -793 -525 1227 1327 -1096 795 -1745 -557 186 313 -2044 435 -2154 -1726 -1815 -2765 -33 -622 1399 67 1018 99 534 463 -923 810 -1685 3010 -1275 1563 -1289 1822 1275 1379 325 58 883 -1160 1699 -3235 86 -1153 1834 1252 2990 -514 -1541 -525 -2516 1788 -1844 1505 -2081 996 -1120 -562 -486 108 1173 -769 1712 -3217 2203 -1367 905 -823 1148 146 -1523 1582 356 573 -1079 144