File name: Pandora111s1_Bucharest_20230302_L2Fit_fout2c1d20200901p1-8.txt
File generation date: 20240917T183622.5Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c1p1-8
Local principal investigator: Anca Nemuc
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 111
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora111_OF_v1d20200312.txt
Instrument calibration file used: Pandora111s1_CF_v1d20200901.txt
Level 1 file used: Pandora111s1_Bucharest_20230302_L1_smca1c1d20200901p1-8.txt
Full location name: MARS Atmospheric Observatory
Short location name: Bucharest
Country of location: Romania
Location latitude [deg]: 44.3440
Location longitude [deg]: 26.0120
Location altitude [m]: 93
Local noon date: 20230302
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 222 363
Nominal wavelengths inside fitting window [nm]: 305.1225 305.2643 305.4060 305.5477 305.6894 305.8310 305.9727 306.1144 306.2560 306.3976 306.5393 306.6809 306.8225 306.9640 307.1056 307.2472 307.3887 307.5303 307.6718 307.8133 307.9549 308.0964 308.2378 308.3793 308.5208 308.6622 308.8037 308.9451 309.0865 309.2280 309.3694 309.5108 309.6521 309.7935 309.9349 310.0762 310.2175 310.3589 310.5002 310.6415 310.7828 310.9240 311.0653 311.2066 311.3478 311.4890 311.6303 311.7715 311.9127 312.0539 312.1950 312.3362 312.4774 312.6185 312.7597 312.9008 313.0419 313.1830 313.3241 313.4652 313.6062 313.7473 313.8883 314.0294 314.1704 314.3114 314.4524 314.5934 314.7344 314.8753 315.0163 315.1572 315.2982 315.4391 315.5800 315.7209 315.8618 316.0027 316.1435 316.2844 316.4252 316.5661 316.7069 316.8477 316.9885 317.1293 317.2700 317.4108 317.5516 317.6923 317.8330 317.9738 318.1145 318.2552 318.3959 318.5365 318.6772 318.8178 318.9585 319.0991 319.2397 319.3803 319.5209 319.6615 319.8021 319.9427 320.0832 320.2238 320.3643 320.5048 320.6453 320.7858 320.9263 321.0668 321.2072 321.3477 321.4881 321.6285 321.7689 321.9093 322.0497 322.1901 322.3305 322.4708 322.6112 322.7515 322.8919 323.0322 323.1725 323.3128 323.4530 323.5933 323.7336 323.8738 324.0140 324.1543 324.2945 324.4347 324.5749 324.7150 324.8552 324.9954
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature in head sensor [°C], 999=no temperature signal
Column 97: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 98: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 99: Humidity in head sensor [%], -9=no humidity signal
Column 100: Pressure in head sensor [hPa], -9=no pressure signal
Columns 101-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-384: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230302T073733.0Z 8461.317743 214 1 44.01 2 64.32 131.77 107.99 13.08 0.00 1 0.00 1 0 25 9.664e-02 2.497e-02 2.170e-01 3.225e-02 3.298070e-01 1.579199e-02 4.081715e-03 -6.000000e+00 5.295545e-02 225.22 -2.00 3.58 -2.00 318.73 0.00e+00 2.200389e-03 3.244352e-03 1.014282e-03 -6.000000e+00 2.259023e-03 273.04 -2.00 20.00 -2.00 318.21 0.00e+00 2.294 0.000 302.00 328.00 3 7.4766e+00 4.2575e-02 2.8455e-02 -6.0000e+00 1.3148e-01 1.4232e-01 4.8627e-02 1.7207e-02 -6.0000e+00 1.4302e-01 -1.5213e-02 3.4837e-02 9.2174e-03 -6.0000e+00 8.4781e-02 -1.4596e-03 1.8690e-02 3.3795e-03 -6.0000e+00 3.7151e-02 1.9232e-05 5.4299e-04 8.4816e-04 2.9522e-05 -6.0000e+00 2.2980e-03 8.6078e-03 0.0000e+00 12 8 8 10 0 0 -274.90 15.46 1.33 0.00861 0.01269 11 4 2 8 0 4000.000 15.00 15.46 10.53 22.90 22.50 46.3 1019.75 -1774 2419 -12557 10745 -40050 -2320 39392 -32650 47830 -30836 -13954 -28017 -2995 15706 6995 6474 -1425 10877 9890 14737 5539 8915 5920 -14053 6095 946 20655 -12664 15371 9045 -1532 10087 -12237 2611 -9159 7551 -12125 -410 7450 1985 3682 9973 -847 -1559 6016 -2096 -2443 1585 -8253 8465 -315 2766 -307 -4643 1979 -3621 -1984 -5535 3457 3926 2075 2881 3566 4472 -2715 2983 -8013 999 -466 1820 1776 723 3626 123 -3343 -6898 -6313 -11668 -5972 -1713 -2426 -1494 -1627 3882 -1454 1254 2307 2669 3910 766 113 -4008 -4239 -1589 13 1685 2843 2058 439 -1571 -1951 -4289 -804 -3419 1839 -1848 943 1886 4508 1753 2306 1540 364 -808 -3474 -3531 -481 243 527 -984 2842 233 1820 -1403 -2224 -2649 -2829 -1471 -2806 1628 -1834 -1556 676 -287 533 1211 2054 976 718 -505 -1403 900000 -90 125 -747 463 -2473 -103 1284 -2420 1782 -2513 -942 -2447 -244 1262 709 709 -176 1254 1198 1768 716 1100 793 -2455 915 152 2598 -2144 1896 1269 -269 1756 -2886 496 -1805 1333 -3035 -112 2234 699 1340 3533 -340 -628 2270 -849 -975 600 -3443 3163 -141 1275 -155 -2521 1024 -2032 -1089 -3052 1710 1975 1151 1753 2350 2985 -1858 1763 -5109 625 -344 1445 1468 599 2791 91 -2262 -4337 -3748 -7777 -4364 -1361 -2160 -1406 -1587 3842 -1630 1446 2704 3102 4302 799 108 -3604 -3758 -1495 13 1926 3596 2798 590 -2056 -2292 -4849 -929 -4456 2375 -2586 1338 2816 7111 3020 3979 2554 563 -1152 -4815 -4972 -693 376 857 -1628 4379 356 2613 -1984 -2998 -3373 -3761 -2131 -4456 2591 -3062 -2650 1187 -545 1040 2385 4086 1949 1379 -934 -2484 900000