File name: Pandora206s1_BuffaloNY_20230323_L2Fit_fsus1c4d20220512p1-8.txt
File generation date: 20241121T053620.2Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c4p1-8
Local principal investigator: ----
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 206
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora206_OF_v2d20211008.txt
Instrument calibration file used: Pandora206s1_CF_v4d20220512.txt
Level 1 file used: Pandora206s1_BuffaloNY_20230323_L1_smca1c4d20220512p1-8.txt
Full location name: University at Buffalo
Short location name: BuffaloNY
Country of location: Canada
Location latitude [deg]: 43.0015
Location longitude [deg]: -78.7869
Location altitude [m]: 190
Local noon date: 20230323
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 230 375
Nominal wavelengths inside fitting window [nm]: 306.0611 306.2020 306.3428 306.4837 306.6246 306.7654 306.9063 307.0471 307.1879 307.3287 307.4695 307.6103 307.7511 307.8918 308.0326 308.1733 308.3140 308.4548 308.5955 308.7362 308.8768 309.0175 309.1582 309.2988 309.4394 309.5801 309.7207 309.8613 310.0019 310.1424 310.2830 310.4236 310.5641 310.7046 310.8451 310.9857 311.1261 311.2666 311.4071 311.5476 311.6880 311.8285 311.9689 312.1093 312.2497 312.3901 312.5305 312.6708 312.8112 312.9515 313.0919 313.2322 313.3725 313.5128 313.6531 313.7934 313.9336 314.0739 314.2141 314.3543 314.4946 314.6348 314.7750 314.9151 315.0553 315.1955 315.3356 315.4758 315.6159 315.7560 315.8961 316.0362 316.1763 316.3163 316.4564 316.5964 316.7364 316.8765 317.0165 317.1565 317.2964 317.4364 317.5764 317.7163 317.8563 317.9962 318.1361 318.2760 318.4159 318.5558 318.6956 318.8355 318.9753 319.1152 319.2550 319.3948 319.5346 319.6744 319.8141 319.9539 320.0937 320.2334 320.3731 320.5128 320.6525 320.7922 320.9319 321.0716 321.2112 321.3509 321.4905 321.6301 321.7697 321.9093 322.0489 322.1885 322.3280 322.4676 322.6071 322.7467 322.8862 323.0257 323.1652 323.3046 323.4441 323.5836 323.7230 323.8624 324.0018 324.1413 324.2806 324.4200 324.5594 324.6988 324.8381 324.9774 325.1168 325.2561 325.3954 325.5347 325.6739 325.8132 325.9525 326.0917 326.2309 326.3702
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230323T172146.0Z 8482.723449 165 1 28.01 2 41.88 180.01 39.37 138.92 0.00 1 0.00 1 0 49 2.966e-02 1.558e-02 2.528e-02 1.095e-02 -9.422865e-06 4.040576e-06 3.224515e-07 3.617214e-07 1.331611e-05 226.46 -2.00 3.55 -2.00 321.60 0.00e+00 7.257496e-03 1.447727e-03 2.068856e-04 2.203176e-05 3.514517e-03 275.34 -2.00 20.00 -2.00 321.53 0.00e+00 -4.012471e-03 2.003308e-03 6.722649e-05 2.416206e-05 6.195909e-03 275.34 -2.00 20.00 -2.00 321.49 0.00e+00 -4.616776e-04 2.905098e-03 2.517672e-04 9.552367e-06 6.378909e-03 275.34 -2.00 20.00 -2.00 321.49 0.00e+00 2.092805e-01 1.424132e-02 9.185491e-04 1.016391e-03 3.570847e-02 204.73 15.71 0.00 0.14 62.61 317.65 0.00e+00 2.016445e-03 7.933094e-04 1.367934e-04 4.431675e-05 8.932655e-04 275.34 -2.00 20.00 -2.00 316.74 0.00e+00 1.342 0.000 303.00 329.40 4 8.2333e+00 3.3019e-02 1.2807e-02 1.8399e-03 1.1319e-01 6.7838e-02 4.6605e-02 5.9664e-03 2.4547e-04 1.2078e-01 6.9227e-02 2.6806e-02 1.8094e-03 8.4423e-05 6.6588e-02 -2.6745e-02 1.1610e-02 1.7026e-03 3.6113e-05 2.4872e-02 -2.1182e-02 8.5540e-03 5.9107e-04 4.7028e-05 1.7078e-02 3.4092e-05 -1.2431e-02 8.7194e-03 9.1411e-04 1.7081e-05 9.9207e-03 -2.7109e-04 3.2863e-04 1.7392e-05 7.7555e-07 8.5925e-04 -1.6867e-02 9.5621e-05 3.8166e+00 1.0814e+00 2.3011e-02 4.4212e-04 2.4393e+00 12 8 8 10 0 0 -55.38 17.88 2.53 -0.01687 -0.01894 7 7 2 8 0 4000.000 15.00 17.88 16.25 21.38 21.27 15.4 1032.96 16559 -8276 2443 -1456 4137 -977 9941 -1891 982 2306 -2892 878 -4063 6038 -5259 7563 -1551 -795 -3791 -592 756 -1961 2235 394 -666 -6625 3352 -3054 -749 -1878 6391 -1395 -2628 -30 1010 4604 -648 2804 -3224 -3268 -7058 5404 -2503 1324 -516 -983 3109 2990 446 530 -1414 -917 1615 -518 4128 3557 2142 -1569 2087 -1439 1168 -1081 -2712 2135 -626 1229 591 609 -1762 -856 -597 -1067 -3684 -368 2940 -6486 766 1399 -1008 833 1127 -1075 1408 -2360 -433 -1547 -1140 -2043 -942 27 1374 1136 1674 1503 748 -2 -30 1301 -2322 450 705 447 388 1015 705 -1583 850 -214 1296 -2144 414 -2048 -366 -531 1688 172 2 -1193 -74 -1280 1304 1764 -1582 1558 309 989 -1582 -59 -1286 -174 262 1246 -1013 1448 -831 575 -665 -1441 454 -9 467 669 559 -885 124 -100 1889 -1291 366 -224 610 -168 1742 -417 232 558 -755 228 -1131 1551 -1482 1902 -443 -231 -1166 -178 212 -525 585 110 -191 -2156 1042 -985 -230 -638 2266 -604 -1344 -16 563 2557 -384 1595 -1950 -1939 -4203 2775 -1368 726 -305 -610 1947 1929 296 357 -966 -611 1047 -353 2867 2665 1721 -1301 1527 -1013 802 -759 -2183 1793 -562 1082 505 486 -1342 -586 -385 -715 -2845 -297 2518 -6479 735 1424 -1087 923 1281 -1256 1597 -2548 -419 -1433 -1006 -1907 -923 29 1605 1357 2000 1688 789 -2 -31 1437 -2793 550 903 576 526 1434 1005 -2208 1110 -258 1487 -2445 476 -2583 -484 -721 2214 224 3 -1450 -85 -1418 1408 2019 -1981 1985 396 1275 -2150 -83 -1941 -266 409 1934 -1557 2107 -1206 806 -962 -2232 745 -15 843 1231 1049 -1708 233 -187
SS 20230323T184148.8Z 8482.779037 189 1 28.00 2 45.52 208.67 32.77 170.04 0.00 1 0.00 1 0 49 3.402e-02 1.759e-02 2.856e-02 1.149e-02 -1.654851e-05 4.230051e-06 4.121776e-07 3.617453e-07 1.534314e-05 226.47 -2.00 3.55 -2.00 321.71 0.00e+00 7.164264e-03 1.537809e-03 1.806944e-04 2.205438e-05 4.042977e-03 275.34 -2.00 20.00 -2.00 321.70 0.00e+00 -4.601069e-03 2.125841e-03 1.437072e-04 2.417033e-05 7.098318e-03 275.34 -2.00 20.00 -2.00 321.57 0.00e+00 1.256712e-02 3.149078e-03 8.524978e-04 9.583562e-06 7.329821e-03 275.34 -2.00 20.00 -2.00 321.61 0.00e+00 1.764648e-01 1.310442e-02 1.827760e-03 1.016266e-03 4.109732e-02 156.61 16.15 0.00 0.43 71.56 317.61 0.00e+00 1.749253e-03 8.649714e-04 1.339451e-04 4.432703e-05 1.037959e-03 275.34 -2.00 20.00 -2.00 316.93 0.00e+00 1.425 0.000 303.00 329.40 4 8.0964e+00 3.4352e-02 1.5589e-02 1.8398e-03 1.2906e-01 -5.1584e-02 3.5156e-02 1.0755e-02 2.4482e-04 1.3874e-01 9.6807e-02 2.3863e-02 3.2271e-03 8.5564e-05 7.6735e-02 -2.5133e-02 1.1539e-02 1.5099e-03 3.6562e-05 2.8795e-02 -2.1864e-02 9.0202e-03 5.9474e-04 4.8680e-05 1.9508e-02 3.1901e-05 2.4833e-02 1.0524e-02 8.8932e-04 1.5405e-05 1.0645e-02 2.9890e-04 3.5448e-04 1.6371e-05 7.7966e-07 9.8322e-04 -1.6483e-02 2.9028e-04 5.1853e+00 1.1296e+00 1.4228e-02 3.6954e-04 2.8737e+00 12 8 8 10 0 0 84.48 17.88 1.13 -0.01648 -0.01420 7 7 2 8 0 4000.000 15.00 17.88 13.57 21.38 21.27 15.2 1012.82 -9350 -1346 -4639 2615 2649 8105 4005 5379 -1582 517 -12814 1731 3519 2098 6828 3046 6088 -11014 714 -4235 1844 -4377 3326 15351 -4881 -5775 -675 2901 -1590 1107 -1450 5164 -3525 6602 -1367 4905 861 4399 490 -4772 -8328 3768 871 136 4546 -2657 572 798 -464 -927 -345 -427 -476 306 4042 1946 1590 75 -3127 3062 -1212 -1388 -4734 1433 -1315 957 283 -1176 392 1119 855 -4193 -1566 -2224 3044 -2774 474 1456 -55 -751 1137 191 1267 -501 -2453 -1828 -1966 -162 -2560 1227 1097 833 1010 2773 51 188 -753 1174 -2742 3 2070 457 690 360 2049 -2701 1806 314 802 -3065 244 -1501 -505 697 252 946 -1259 2712 -3722 -414 -750 2121 -1820 2109 -628 1922 -272 -782 -1109 -1109 1835 -56 21 -1021 986 -881 -2 -1347 441 227 830 -216 1317 -874 -175 76 -1158 -169 -655 336 353 1147 665 1008 -359 120 -3513 417 849 521 1586 747 1510 -3372 199 -1256 495 -1150 785 3304 -1375 -1772 -208 813 -455 340 -521 2040 -1744 3223 -751 2603 481 2349 273 -2761 -4833 1937 453 74 2495 -1592 348 500 -296 -603 -230 -279 -312 206 2815 1447 1259 60 -2365 2077 -825 -971 -3736 1163 -1143 812 233 -952 282 724 541 -2799 -1147 -1840 2627 -2620 447 1451 -60 -856 1306 222 1398 -515 -2422 -1643 -1694 -144 -2568 1312 1264 1016 1196 3022 55 190 -786 1310 -3243 3 2570 601 952 507 2953 -3799 2325 387 917 -3619 288 -1922 -661 924 332 1248 -1607 3111 -4363 -463 -841 2378 -2250 2634 -832 2513 -373 -1110 -1660 -1700 2801 -88 32 -1514 1442 -1286 -3 -2064 717 395 1489 -413 2534 -1739 -341 146