File name: Pandora206s1_BuffaloNY_20241204_L2Fit_fsus1c6d20240814p1-8.txt
File generation date: 20241205T054535.9Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Kang Sun
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 206
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora206_OF_v3d20211008.txt
Instrument calibration file used: Pandora206s1_CF_v6d20240814.txt
Level 1 file used: Pandora206s1_BuffaloNY_20241204_L1_smca1c6d20240814p1-8.txt
Full location name: University at Buffalo
Short location name: BuffaloNY
Country of location: United States
Location latitude [deg]: 43.0015
Location longitude [deg]: -78.7869
Location altitude [m]: 190
Local noon date: 20241204
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 230 375
Nominal wavelengths inside fitting window [nm]: 306.0215 306.1624 306.3033 306.4442 306.5850 306.7259 306.8668 307.0076 307.1484 307.2893 307.4301 307.5709 307.7117 307.8524 307.9932 308.1340 308.2747 308.4154 308.5561 308.6968 308.8375 308.9782 309.1189 309.2596 309.4002 309.5408 309.6815 309.8221 309.9627 310.1033 310.2438 310.3844 310.5250 310.6655 310.8060 310.9466 311.0871 311.2276 311.3681 311.5085 311.6490 311.7894 311.9299 312.0703 312.2107 312.3511 312.4915 312.6319 312.7723 312.9126 313.0530 313.1933 313.3336 313.4740 313.6143 313.7545 313.8948 314.0351 314.1753 314.3156 314.4558 314.5960 314.7362 314.8764 315.0166 315.1568 315.2970 315.4371 315.5772 315.7174 315.8575 315.9976 316.1377 316.2777 316.4178 316.5579 316.6979 316.8379 316.9780 317.1180 317.2580 317.3980 317.5379 317.6779 317.8178 317.9578 318.0977 318.2376 318.3775 318.5174 318.6573 318.7972 318.9370 319.0769 319.2167 319.3565 319.4963 319.6361 319.7759 319.9157 320.0554 320.1952 320.3349 320.4747 320.6144 320.7541 320.8938 321.0335 321.1731 321.3128 321.4524 321.5921 321.7317 321.8713 322.0109 322.1505 322.2900 322.4296 322.5692 322.7087 322.8482 322.9877 323.1272 323.2667 323.4062 323.5457 323.6851 323.8246 323.9640 324.1034 324.2428 324.3822 324.5216 324.6610 324.8003 324.9397 325.0790 325.2184 325.3577 325.4970 325.6363 325.7755 325.9148 326.0541 326.1933 326.3325
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20241204T155621.2Z 9104.664134 151 1 24.01 2 67.28 162.63 90.31 127.78 0.00 1 0.00 1 0 177 1.101e-01 2.421e-02 2.579e-01 2.366e-02 -1.629864e-05 8.508069e-06 6.517349e-07 4.167822e-07 4.541452e-05 222.46 -2.00 3.55 -2.00 322.76 0.00e+00 1.183237e-02 3.395722e-03 3.041029e-04 1.925989e-05 1.262082e-02 275.49 -2.00 20.00 -2.00 323.08 0.00e+00 -4.966515e-03 4.500506e-03 2.604002e-04 2.844579e-05 2.295769e-02 275.49 -2.00 20.00 -2.00 322.38 0.00e+00 3.200819e-02 8.418764e-03 1.837105e-03 7.970920e-06 2.366349e-02 275.49 -2.00 20.00 -2.00 322.62 0.00e+00 2.611045e-01 3.167096e-02 4.680379e-03 5.992463e-03 1.349654e-01 135.81 25.40 0.00 0.71 227.98 319.85 0.00e+00 -1.321271e-04 3.315488e-03 1.057654e-03 5.042225e-05 3.402734e-03 275.49 -2.00 20.00 -2.00 319.08 0.00e+00 2.568 0.000 303.00 329.40 4 6.8228e+00 8.6033e-02 2.8913e-02 2.1484e-03 4.1631e-01 -1.5931e-01 8.6588e-02 2.9595e-02 3.1018e-04 4.4812e-01 1.6910e-01 5.9620e-02 1.1177e-02 1.1370e-04 2.4478e-01 -5.1518e-02 4.4026e-02 2.4476e-03 6.8211e-05 8.2176e-02 -2.5247e-02 2.6925e-02 8.5565e-04 7.8273e-05 6.2543e-02 2.4454e-05 7.5437e-02 2.3164e-02 1.2935e-08 1.3995e-10 1.2127e-07 -1.5045e-03 7.5480e-04 2.8063e-05 8.7420e-07 3.2061e-03 -8.8792e-03 0.0000e+00 1.3844e+00 1.7580e+00 3.0888e-02 9.7577e-04 6.7704e+00 12 8 8 10 0 0 -39.30 17.90 1.72 -0.00888 -0.02036 6 6 2 8 0 4000.000 15.00 17.90 4.81 21.48 21.27 22.7 895.04 -16198 -33402 -18585 25407 27507 -25639 10143 -14466 44964 33168 49449 11423 -9537 -8762 -19326 14650 -4303 -4050 -18938 45328 13777 12390 -5074 -216 256 3407 5348 -11981 -11215 -9037 2306 22652 -5773 3636 4372 11931 4349 1046 -4651 -4567 19578 3052 3816 -446 -1674 -5072 10331 3442 -3916 303 2032 578 -9683 3485 3599 2582 1210 -1475 1393 -7569 -4126 -4955 -3909 4911 -2574 1197 2232 1466 3083 3887 746 -5113 -5176 237 2992 -2018 281 631 4690 1273 -464 -2855 453 -3119 376 6 -8856 -3455 -5392 3196 -1746 1169 1708 6574 55 551 -2507 3492 -324 -2231 3697 1957 1218 485 4244 -2507 1709 1612 527 -1000 -1455 -2589 -1310 455 -1701 2086 -177 -4421 -1543 -157 -1294 883 -1846 -343 1635 394 -1287 -620 -322 -593 1903 356 -778 1793 -1398 578 93 -849 -970 -683 4740 -228 1888 -790 -679 -1237 -363 -923 -474 569 616 -1073 274 -858 1080 1239 1414 735 -862 -810 -2057 974 -416 -425 -2586 2607 1195 967 -488 -21 27 384 678 -1863 -1626 -1405 363 3395 -1478 960 1214 3259 1282 315 -1503 -1479 4881 919 1128 -144 -593 -1929 3646 1388 -1697 133 884 250 -4625 1474 1646 1322 668 -874 773 -4267 -2158 -2641 -2330 2979 -1725 803 1432 895 1675 1898 359 -2707 -3153 157 2152 -1668 233 547 4168 1191 -455 -2875 440 -2890 308 4 -7132 -2785 -4988 3041 -1914 1361 1976 6988 58 522 -2422 3460 -354 -2587 4259 2422 1627 683 5974 -3721 2366 2062 629 -1188 -1787 -3405 -1807 633 -2369 2726 -228 -5569 -1863 -177 -1457 1054 -2395 -468 2288 570 -1948 -990 -542 -1031 3295 636 -1366 2926 -2265 884 144 -1401 -1739 -1316 8990 -489 4125 -1818 -1561 -2809
SS 20241204T173114.0Z 9104.730023 204 1 28.45 2 65.63 186.49 78.58 144.75 0.00 1 0.00 1 7 257 3.506e-01 6.199e-02 2.635e-01 4.120e-02 7.569758e-07 1.481235e-05 1.232570e-06 4.167783e-07 1.446242e-04 222.46 -2.00 3.55 -2.00 322.84 0.00e+00 1.754538e-02 5.873512e-03 1.020305e-03 1.926757e-05 4.017750e-02 275.48 -2.00 20.00 -2.00 323.20 0.00e+00 7.371598e-04 7.857716e-03 3.319712e-04 2.835561e-05 7.306792e-02 275.48 -2.00 20.00 -2.00 322.43 0.00e+00 -6.293756e-03 1.363918e-02 2.156247e-03 8.042540e-06 7.537096e-02 275.48 -2.00 20.00 -2.00 322.69 0.00e+00 3.134469e-01 7.138079e-02 1.009969e-02 5.990786e-03 4.285445e-01 201.69 53.75 0.00 0.26 322.52 319.93 0.00e+00 9.935187e-03 5.472484e-03 3.350544e-03 5.043556e-05 1.061001e-02 275.48 -2.00 20.00 -2.00 318.97 0.00e+00 2.407 0.000 303.00 329.40 4 7.6232e+00 1.4731e-01 3.0437e-02 2.1481e-03 1.3260e+00 6.2281e-02 2.6815e-01 5.3476e-02 3.1151e-04 1.4267e+00 1.0642e-01 1.4124e-01 3.4031e-02 1.1348e-04 7.7934e-01 9.2841e-02 5.4729e-02 1.6246e-02 5.2099e-05 2.6120e-01 -1.2061e-01 3.8534e-02 1.7296e-03 6.8552e-05 1.9871e-01 1.8114e-05 6.3050e-02 1.0062e-06 2.2875e-08 8.7960e-11 3.7377e-07 -4.0073e-03 1.3076e-03 1.3251e-04 9.0534e-07 1.0123e-02 -3.4669e-03 0.0000e+00 2.7006e+00 3.0017e+00 7.7620e-02 9.4622e-04 2.2084e+01 12 10 8 10 0 0 -48.99 17.92 4.23 -0.00347 -0.03404 19 19 1 8 0 1497.320 15.00 17.92 5.43 21.48 21.27 22.7 899.27 -28319 132280 -44719 231744 28964 -81 58828 108302 43367 72501 67934 24884 65714 68653 51446 -81420 48075 -20655 38586 -29109 59117 -10268 71661 54434 29549 39719 10393 5331 -14331 18220 -14207 62181 -10846 1872 41439 27341 2768 21672 146 13303 -11419 3310 24103 -7935 86625 -12044 12438 3228 14301 -3643 8534 -6179 -4247 6956 1202 -893 -3443 7020 17480 -1495 -4547 11952 -14458 20208 -9774 2361 -4926 2591 12117 -19078 -2081 -13516 5623 -8847 5768 -10108 11092 -6933 5675 -1267 -3431 -5881 382 -12258 3384 7903 -5840 3791 -4419 10437 -743 8418 -9631 11984 153 6536 -202 5582 -654 -1093 4252 582 5098 2506 7554 -4209 3306 -3958 5651 -5433 289 3847 -702 2403 -314 5000 -55 -3234 -4103 4320 -6933 5417 -15814 8909 -1108 2492 -5112 -1109 -1893 -1438 1871 -531 3921 -1388 2919 1039 -3509 -818 693 -480 375 1608 2972 -94 638 -2601 -2363 5163 -4654 9045 1591 -3 3316 4734 3619 5053 5114 2784 5313 5455 4570 -23734 4356 -3440 3819 -5416 4779 -1483 5076 4780 3539 4651 1731 909 -2741 2746 -3179 7974 -3072 523 8464 6723 878 5949 49 4119 -4327 1111 6491 -2937 14340 -5292 4660 1337 5470 -1624 3475 -2846 -1906 2860 560 -464 -1920 3800 8073 -772 -2343 5255 -9047 10411 -6940 1554 -3377 1564 6085 -11914 -1042 -7737 3014 -6261 3902 -8679 7864 -6151 4769 -1204 -3464 -6213 374 -12758 2774 5737 -4612 2826 -3990 9111 -814 9211 -12668 11927 158 5825 -189 5360 -714 -1252 4890 729 6459 3482 10299 -6308 4309 -5098 6289 -6382 341 4634 -914 3160 -421 6454 -72 -4100 -5041 4675 -8221 6073 -23710 11091 -1596 3521 -7932 -1743 -3173 -2470 3167 -939 6464 -2322 4561 1609 -5732 -1371 1243 -937 775 3522 6652 -214 1517 -6122