File name: Pandora206s1_BuffaloNY_20241208_L2Fit_fsus1c6d20240814p1-8.txt
File generation date: 20241209T084059.9Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Kang Sun
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 206
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora206_OF_v3d20211008.txt
Instrument calibration file used: Pandora206s1_CF_v6d20240814.txt
Level 1 file used: Pandora206s1_BuffaloNY_20241208_L1_smca1c6d20240814p1-8.txt
Full location name: University at Buffalo
Short location name: BuffaloNY
Country of location: United States
Location latitude [deg]: 43.0015
Location longitude [deg]: -78.7869
Location altitude [m]: 190
Local noon date: 20241208
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 230 375
Nominal wavelengths inside fitting window [nm]: 306.0215 306.1624 306.3033 306.4442 306.5850 306.7259 306.8668 307.0076 307.1484 307.2893 307.4301 307.5709 307.7117 307.8524 307.9932 308.1340 308.2747 308.4154 308.5561 308.6968 308.8375 308.9782 309.1189 309.2596 309.4002 309.5408 309.6815 309.8221 309.9627 310.1033 310.2438 310.3844 310.5250 310.6655 310.8060 310.9466 311.0871 311.2276 311.3681 311.5085 311.6490 311.7894 311.9299 312.0703 312.2107 312.3511 312.4915 312.6319 312.7723 312.9126 313.0530 313.1933 313.3336 313.4740 313.6143 313.7545 313.8948 314.0351 314.1753 314.3156 314.4558 314.5960 314.7362 314.8764 315.0166 315.1568 315.2970 315.4371 315.5772 315.7174 315.8575 315.9976 316.1377 316.2777 316.4178 316.5579 316.6979 316.8379 316.9780 317.1180 317.2580 317.3980 317.5379 317.6779 317.8178 317.9578 318.0977 318.2376 318.3775 318.5174 318.6573 318.7972 318.9370 319.0769 319.2167 319.3565 319.4963 319.6361 319.7759 319.9157 320.0554 320.1952 320.3349 320.4747 320.6144 320.7541 320.8938 321.0335 321.1731 321.3128 321.4524 321.5921 321.7317 321.8713 322.0109 322.1505 322.2900 322.4296 322.5692 322.7087 322.8482 322.9877 323.1272 323.2667 323.4062 323.5457 323.6851 323.8246 323.9640 324.1034 324.2428 324.3822 324.5216 324.6610 324.8003 324.9397 325.0790 325.2184 325.3577 325.4970 325.6363 325.7755 325.9148 326.0541 326.1933 326.3325
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20241208T180937.4Z 9108.756683 207 1 24.01 2 67.36 195.54 86.47 102.07 0.00 1 0.00 1 0 193 8.554e-02 3.274e-02 2.029e-01 3.231e-02 8.435481e-06 1.169626e-05 8.266002e-07 4.166829e-07 3.527194e-05 222.40 -2.00 3.55 -2.00 322.67 0.00e+00 8.368215e-03 4.715680e-03 3.822159e-04 1.919643e-05 9.801301e-03 275.03 -2.00 20.00 -2.00 322.99 0.00e+00 -1.703787e-03 6.405623e-03 2.457146e-04 2.839340e-05 1.783015e-02 275.03 -2.00 20.00 -2.00 322.31 0.00e+00 2.413699e-02 1.110151e-02 1.203003e-03 7.879942e-06 1.836568e-02 275.03 -2.00 20.00 -2.00 322.53 0.00e+00 2.548361e-01 4.207540e-02 5.110742e-03 5.992508e-03 1.047998e-01 134.94 34.94 0.00 0.19 177.14 319.70 0.00e+00 1.361977e-03 3.865814e-03 1.822545e-03 5.039839e-05 2.624846e-03 275.03 -2.00 20.00 -2.00 318.75 0.00e+00 2.577 0.000 303.00 329.40 4 7.1031e+00 1.2594e-01 2.8066e-02 2.1481e-03 3.2342e-01 5.1686e-02 1.1158e-01 3.9246e-02 3.0816e-04 3.4821e-01 -9.4170e-02 7.4038e-02 1.2624e-02 1.1303e-04 1.9023e-01 1.1266e-01 3.8366e-02 8.5769e-04 5.2138e-05 6.3835e-02 -3.5406e-02 3.0694e-02 1.0169e-03 6.8249e-05 4.8627e-02 1.7221e-05 2.6116e-01 5.5325e-02 1.8807e-08 9.8976e-11 9.4277e-08 -2.4949e-03 1.0856e-03 1.7728e-05 8.9689e-07 2.4948e-03 -4.6815e-03 0.0000e+00 7.4570e+00 2.4813e+00 3.0689e-02 8.4932e-04 5.1597e+00 12 8 8 10 0 0 9.16 17.96 5.81 -0.00468 -0.02372 6 6 2 8 0 4000.000 15.00 17.96 12.96 21.58 21.38 23.7 952.25 -29950 -21897 -14718 14792 -9499 -1397 14061 2686 -914 20868 7210 19936 -12318 14177 1575 14526 12851 3939 -4585 5009 28152 -23179 9259 1141 -15378 -13794 -2881 -9950 -11230 -20256 347 16139 3809 28306 2537 10652 5212 8643 -4257 1163 -10948 7978 9088 -1821 4807 -4968 11276 11024 3184 385 -4051 -5466 -7998 3484 5803 -141 5311 -1460 -22 -6294 -4167 -2074 -6866 8596 -5182 652 3867 3821 -2730 3909 -6017 -12585 -5349 1570 2827 -2514 3458 1867 9029 2711 919 -815 2109 -6631 -431 -4329 -8773 -5146 -9055 164 2275 2613 3379 5062 -839 1451 -2337 1997 -1422 -1508 5107 1216 -12 4567 4441 -3505 665 2568 2298 -3050 -2371 -2343 -2497 1768 -3352 2640 -1463 -6561 1390 3555 1900 2801 -5070 3567 192 2448 -2591 -928 -2698 -1033 2101 230 1357 1272 -1143 1636 -1748 2039 -310 -1981 2237 78 1287 -757 -18 -837 -1715 -1251 -841 453 -407 -62 534 233 -111 1689 861 1771 -2203 1456 208 1391 1383 537 -769 712 2020 -4302 784 129 -2596 -2546 -498 -1866 -1962 -4679 66 2900 1102 6483 890 3533 1834 2918 -1673 434 -4659 2513 2736 -669 1737 -2197 4253 4408 1430 181 -2008 -2661 -3964 1527 2681 -78 3004 -925 -13 -3623 -2226 -1079 -4311 5041 -3801 446 2451 2275 -1585 1902 -3087 -7202 -3236 989 1993 -2065 2721 1581 7576 2558 902 -822 1997 -6383 -360 -3484 -7124 -4231 -8510 158 2436 3044 3862 5283 -897 1395 -2305 2015 -1589 -1722 6012 1533 -17 6303 6353 -5349 905 3220 2654 -3668 -2912 -3041 -3457 2433 -4876 3523 -1931 -8480 1569 3779 2041 3172 -6786 4636 273 3479 -3979 -1480 -4643 -1803 3622 408 2285 2046 -1835 2468 -2709 3171 -541 -3825 4462 166 2800 -1719 -41 -1869
SS 20241208T182940.1Z 9108.770603 215 1 27.87 2 68.49 200.37 82.96 105.41 0.00 1 0.00 1 0 49 2.406e-02 4.223e-03 3.438e-02 4.897e-03 -2.860568e-06 1.743393e-06 9.980897e-08 4.167029e-07 1.039568e-05 222.40 -2.00 3.55 -2.00 322.75 0.00e+00 9.544391e-04 6.937618e-04 5.371147e-05 1.932217e-05 2.757444e-03 275.03 -2.00 20.00 -2.00 323.02 0.00e+00 -5.150255e-05 9.133796e-04 1.479328e-05 2.837482e-05 5.095017e-03 275.03 -2.00 20.00 -2.00 322.36 0.00e+00 -1.468763e-03 1.679302e-03 1.365120e-04 8.175236e-06 5.164264e-03 275.03 -2.00 20.00 -2.00 322.59 0.00e+00 3.749660e-01 8.419371e-03 3.791441e-04 5.994793e-03 2.961988e-02 224.02 5.16 0.00 0.15 50.27 319.99 0.00e+00 3.428073e-04 6.666283e-04 3.268069e-05 5.042213e-05 7.668447e-04 275.03 -2.00 20.00 -2.00 319.00 0.00e+00 2.703 0.000 303.00 329.40 4 4.9263e+00 1.7862e-02 2.5656e-02 2.1501e-03 9.1670e-02 6.2990e-02 3.1297e-02 3.2001e-03 3.0893e-04 9.8318e-02 -9.5666e-03 1.6618e-02 1.0393e-03 1.1639e-04 5.3527e-02 -3.9836e-03 1.0194e-02 9.9120e-04 1.1280e-04 2.1123e-02 3.0418e-03 5.9075e-03 1.6852e-04 9.4082e-05 1.6638e-02 2.0355e-04 5.5246e-04 2.9435e-03 1.5976e-04 2.1004e-05 2.1788e-03 -5.8837e-04 1.4989e-04 4.8909e-06 8.8577e-07 6.9655e-04 -5.9786e-03 0.0000e+00 2.6563e-01 3.4078e-01 9.0988e-04 4.4433e-04 1.4627e+00 12 8 8 10 0 0 99.96 17.96 0.33 -0.00598 -0.01047 16 16 4 8 0 1741.840 15.00 17.96 13.68 21.58 21.38 23.7 956.64 -10533 -9702 5765 11356 6555 1539 2454 2537 1358 3024 2332 3343 -3968 4766 -10710 1818 4063 -710 -478 1092 439 -5204 -1107 75 6123 -2255 604 -568 -212 -2226 1875 265 -1485 847 -1019 2006 -900 695 -702 -477 -2212 1901 273 1641 45 708 880 1828 19 -136 -696 -1138 -357 -1065 35 -1094 825 -1029 -189 -1874 137 -540 -711 895 -19 473 226 417 441 912 -111 -925 -224 265 605 396 471 -138 852 38 1184 -1183 -396 -841 649 491 -97 -554 -404 -224 117 -223 160 197 -176 -303 -687 363 -281 -5 91 151 154 127 497 -230 242 -383 456 68 -192 -452 -2 -18 148 445 184 -788 -709 133 -132 161 -20 359 -1 319 -582 -151 -247 -81 30 220 171 355 -134 212 -65 175 -41 -180 58 65 161 -87 -104 -68 -367 -379 212 403 250 71 133 160 97 229 187 281 -372 424 -1108 168 395 -77 -55 131 51 -593 -119 9 736 -325 93 -85 -30 -349 324 54 -370 232 -301 598 -282 213 -220 -149 -692 571 84 525 16 267 353 764 8 -61 -315 -503 -154 -471 16 -553 447 -592 -101 -959 70 -287 -420 581 -13 327 150 258 254 472 -55 -482 -133 174 443 309 382 -120 788 36 1150 -1183 -382 -775 541 391 -74 -455 -360 -223 126 -256 183 217 -180 -294 -669 374 -309 -5 110 187 204 176 711 -324 330 -485 549 81 -240 -586 -2 -25 204 597 238 -998 -861 157 -155 199 -26 500 -2 463 -881 -242 -409 -138 52 384 290 592 -216 329 -104 290 -75 -346 117 136 352 -191 -229 -150