File name: Pandora206s1_BuffaloNY_20250416_L2Fit_fsus1c6d20240814p1-8.txt
File generation date: 20250417T052121.2Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Kang Sun
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 206
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora206_OF_v3d20211008.txt
Instrument calibration file used: Pandora206s1_CF_v6d20240814.txt
Level 1 file used: Pandora206s1_BuffaloNY_20250416_L1_smca1c6d20240814p1-8.txt
Full location name: University at Buffalo
Short location name: BuffaloNY
Country of location: United States
Location latitude [deg]: 43.0015
Location longitude [deg]: -78.7869
Location altitude [m]: 190
Local noon date: 20250416
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 230 375
Nominal wavelengths inside fitting window [nm]: 306.0215 306.1624 306.3033 306.4442 306.5850 306.7259 306.8668 307.0076 307.1484 307.2893 307.4301 307.5709 307.7117 307.8524 307.9932 308.1340 308.2747 308.4154 308.5561 308.6968 308.8375 308.9782 309.1189 309.2596 309.4002 309.5408 309.6815 309.8221 309.9627 310.1033 310.2438 310.3844 310.5250 310.6655 310.8060 310.9466 311.0871 311.2276 311.3681 311.5085 311.6490 311.7894 311.9299 312.0703 312.2107 312.3511 312.4915 312.6319 312.7723 312.9126 313.0530 313.1933 313.3336 313.4740 313.6143 313.7545 313.8948 314.0351 314.1753 314.3156 314.4558 314.5960 314.7362 314.8764 315.0166 315.1568 315.2970 315.4371 315.5772 315.7174 315.8575 315.9976 316.1377 316.2777 316.4178 316.5579 316.6979 316.8379 316.9780 317.1180 317.2580 317.3980 317.5379 317.6779 317.8178 317.9578 318.0977 318.2376 318.3775 318.5174 318.6573 318.7972 318.9370 319.0769 319.2167 319.3565 319.4963 319.6361 319.7759 319.9157 320.0554 320.1952 320.3349 320.4747 320.6144 320.7541 320.8938 321.0335 321.1731 321.3128 321.4524 321.5921 321.7317 321.8713 322.0109 322.1505 322.2900 322.4296 322.5692 322.7087 322.8482 322.9877 323.1272 323.2667 323.4062 323.5457 323.6851 323.8246 323.9640 324.1034 324.2428 324.3822 324.5216 324.6610 324.8003 324.9397 325.0790 325.2184 325.3577 325.4970 325.6363 325.7755 325.9148 326.0541 326.1933 326.3325
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20250416T164234.2Z 9237.696229 361 1 24.01 2 33.37 165.45 138.86 277.76 0.00 1 0.00 1 0 49 4.535e-02 1.689e-02 5.501e-02 1.513e-02 -1.238919e-05 5.595618e-06 2.319719e-07 4.246452e-07 1.986384e-05 228.34 -2.00 3.55 -2.00 322.15 0.00e+00 5.484238e-03 2.076037e-03 9.890434e-05 1.926329e-05 5.223501e-03 278.02 -2.00 20.00 -2.00 322.25 0.00e+00 -1.742555e-03 2.808416e-03 4.608894e-05 2.830660e-05 9.500943e-03 278.02 -2.00 20.00 -2.00 321.89 0.00e+00 3.497420e-03 4.478628e-03 3.927581e-04 7.503915e-06 9.812715e-03 278.02 -2.00 20.00 -2.00 322.02 0.00e+00 2.700540e-01 2.197063e-02 9.699003e-04 5.995007e-03 5.439168e-02 212.44 18.89 0.00 0.31 95.29 318.69 0.00e+00 2.854474e-05 1.441563e-03 2.743597e-05 5.141296e-05 1.393979e-03 278.02 -2.00 20.00 -2.00 317.69 0.00e+00 1.197 0.000 303.00 329.40 4 7.8420e+00 4.8788e-02 1.1763e-02 2.1483e-03 1.7148e-01 5.1019e-02 7.6137e-02 4.9825e-03 3.0073e-04 1.8364e-01 2.2494e-02 4.2111e-02 1.7813e-03 1.0974e-04 9.9886e-02 -8.0810e-04 1.9640e-02 6.3233e-04 5.8375e-05 3.7218e-02 -1.5827e-02 1.3334e-02 2.3295e-04 6.8175e-05 2.8119e-02 4.5709e-05 3.1596e-02 1.4233e-02 4.8333e-04 2.0922e-05 7.6230e-03 3.4214e-04 4.6632e-04 1.0974e-05 8.9656e-07 1.3079e-03 -5.5575e-03 0.0000e+00 3.9027e+00 1.5984e+00 8.9514e-03 5.8397e-04 3.6548e+00 12 8 8 10 0 0 44.94 17.82 1.68 -0.00556 -0.00295 6 6 2 8 0 4000.000 15.00 17.82 9.13 21.48 21.27 24.6 981.82 -2992 -9951 16315 328 8785 -5000 23252 -11008 9784 5479 11528 -8304 483 1967 -1027 16044 -1976 -986 -6032 7454 -7432 536 -11823 -386 -11308 1456 -1904 -1978 -1909 1027 3102 2043 -2155 -731 6320 2797 2309 3674 -2458 -4115 4002 -560 1880 -1776 1480 -1173 2686 5479 -735 988 -1766 228 -10294 3099 145 691 472 -1753 -909 -5196 1869 -895 -1970 1613 -991 1703 1770 -2002 461 144 2731 -4584 438 498 3154 137 2236 -538 1712 2251 124 -1098 220 -347 -2285 2530 -1817 -2852 -3467 1139 966 285 1066 603 676 -2172 68 -836 -512 -1310 3088 -789 1359 1165 1313 -1707 -355 1449 1376 719 -4351 288 -2069 1080 -2419 2076 219 364 -735 220 2125 -2375 128 -1596 292 -635 312 -1400 1056 85 2078 183 -551 -44 -374 881 -339 1104 -772 43 -126 1363 40 -163 -435 -576 -208 -870 1154 28 697 -522 2000 -1680 1330 831 1679 -1586 86 352 -188 2433 -393 -203 -1367 1482 -1643 101 -2400 -75 -2583 322 -458 -468 -430 246 836 645 -855 -319 2674 1269 1068 1653 -1180 -1975 1704 -245 817 -810 700 -601 1398 2891 -418 564 -1039 128 -6401 1769 88 453 332 -1279 -607 -3354 1121 -566 -1382 1211 -802 1346 1346 -1481 309 87 1512 -2808 288 371 2535 119 1965 -519 1733 2376 138 -1244 237 -346 -2190 2112 -1507 -2500 -3389 1143 1082 345 1261 673 724 -2225 68 -932 -582 -1568 3722 -1034 1838 1673 1920 -2493 -478 1756 1600 831 -5299 357 -2804 1460 -3339 2673 283 439 -856 241 2260 -2828 159 -2132 397 -889 444 -2085 1618 136 3306 300 -883 -68 -560 1311 -518 1708 -1323 78 -239 2706 84 -342 -911 -1189
SS 20250416T192712.0Z 9237.810556 452 1 24.00 2 43.45 231.33 162.72 336.90 0.00 1 0.00 1 0 65 6.126e-02 2.373e-02 7.695e-02 1.747e-02 -9.698276e-06 6.419620e-06 2.558415e-07 4.246978e-07 2.614945e-05 228.35 -2.00 3.55 -2.00 322.30 0.00e+00 -2.091720e-04 2.425267e-03 1.984973e-04 1.928102e-05 7.027190e-03 278.04 -2.00 20.00 -2.00 322.45 0.00e+00 6.896072e-03 3.275520e-03 5.160272e-05 2.834484e-05 1.277171e-02 278.04 -2.00 20.00 -2.00 322.02 0.00e+00 -8.675691e-04 5.257762e-03 3.324456e-04 7.581287e-06 1.326264e-02 278.04 -2.00 20.00 -2.00 322.17 0.00e+00 3.157088e-01 2.739890e-02 1.424260e-03 5.996013e-03 7.356917e-02 226.79 20.79 0.00 0.19 127.61 319.07 0.00e+00 3.068448e-04 1.830227e-03 3.605619e-05 5.140347e-05 1.971744e-03 278.04 -2.00 20.00 -2.00 317.99 0.00e+00 1.376 0.000 303.00 329.40 4 7.7615e+00 6.5375e-02 1.3113e-02 2.1485e-03 2.3072e-01 1.7344e-01 1.0174e-01 5.6319e-03 3.0321e-04 2.4750e-01 -1.2325e-01 5.3506e-02 2.9904e-03 1.1146e-04 1.3487e-01 4.9429e-02 2.3340e-02 6.1279e-04 6.4449e-05 4.7830e-02 1.9561e-02 1.5747e-02 7.5752e-04 7.1287e-05 3.6744e-02 3.8254e-05 7.3989e-02 1.9666e-02 1.7010e-04 1.8702e-05 6.3964e-03 -6.1991e-04 5.4769e-04 7.7366e-06 9.0155e-07 1.7664e-03 -6.4041e-04 0.0000e+00 4.9866e+00 1.8043e+00 2.4725e-02 5.8689e-04 4.6879e+00 12 9 8 11 8 0 26.05 17.80 0.73 -0.00064 -0.00537 6 6 2 8 0 4000.000 14.99 17.80 10.10 21.38 21.17 24.6 987.46 -37093 -17078 452 10317 -10936 -643 1084 -5463 -7902 17674 761 3368 -9571 19986 4898 10916 8235 872 -1025 -6301 16096 -10971 332 -8190 -1156 -13475 7114 -8246 -1863 -10968 7023 3780 3116 -542 4713 6346 1031 6415 -1881 175 1674 6372 167 162 2075 -2152 3506 2432 2984 -904 4731 -5963 -4026 -4955 2889 -4388 4892 -711 -1521 -2213 -1833 -1969 -5110 3551 -4198 2205 343 -1820 -2807 2275 -806 -3223 -4617 1780 3566 445 3715 -603 2167 1652 1547 -3382 1156 -1685 -663 -796 36 -4274 -587 -412 90 -2738 -1506 14890 -2516 1148 -3591 3462 -3587 1774 2247 2538 435 1873 1795 -2748 784 -364 3889 -2352 -2050 -76 -850 -358 1609 -213 -561 -4201 553 849 729 -886 -2191 -961 -449 123 -479 822 -531 586 840 -77 -4 -941 100 944 1256 -1606 -229 -336 1759 968 689 -977 186 -941 -2950 -1159 25 483 -784 -46 96 -633 -1118 1901 106 476 -1671 2425 730 1505 1267 151 -190 -1282 2317 -2039 51 -1513 -212 -3181 1405 -1874 -367 -2692 1604 1095 1075 -220 1879 2561 447 2575 -827 76 691 2439 68 69 938 -1081 1754 1288 1585 -510 2500 -3447 -2245 -2851 1630 -2827 3171 -483 -998 -1356 -1087 -1201 -3676 2597 -3390 1722 262 -1321 -1838 1300 -447 -1883 -3018 1241 2726 384 3217 -567 2127 1706 1644 -3800 1193 -1693 -599 -657 28 -3654 -538 -422 103 -3358 -1798 14480 -2734 1110 -3663 3581 -4236 2070 2757 3249 581 2621 2572 -4008 1030 -460 4367 -2792 -2512 -97 -1174 -507 2199 -290 -726 -5263 651 948 806 -1065 -2768 -1270 -615 171 -686 1235 -852 954 1348 -126 -6 -1489 152 1384 1860 -2610 -401 -614 3376 1997 1419 -2078 400 -2004