File name: Pandora20s1_Busan_20240608_L2Fit_fsus1c7d20220623p1-8.txt
File generation date: 20240608T153230.9Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c7p1-8
Local principal investigator: Jae Hwan Kim
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 20
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora20_OF_v4d20201001.txt
Instrument calibration file used: Pandora20s1_CF_v7d20220623.txt
Level 1 file used: Pandora20s1_Busan_20240608_L1_smca1c7d20220623p1-8.txt
Full location name: Busan/South Korea
Short location name: Busan
Country of location: South Korea
Location latitude [deg]: 35.2353
Location longitude [deg]: 129.0825
Location altitude [m]: 71
Local noon date: 20240608
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Fiel cal based on session 6
First and last pixel inside fitting window: 266 411
Nominal wavelengths inside fitting window [nm]: 306.0408 306.1820 306.3231 306.4642 306.6053 306.7464 306.8875 307.0285 307.1696 307.3106 307.4516 307.5926 307.7336 307.8745 308.0154 308.1564 308.2973 308.4381 308.5790 308.7198 308.8607 309.0015 309.1423 309.2831 309.4238 309.5646 309.7053 309.8460 309.9867 310.1274 310.2680 310.4087 310.5493 310.6899 310.8305 310.9710 311.1116 311.2521 311.3926 311.5331 311.6736 311.8141 311.9545 312.0949 312.2354 312.3757 312.5161 312.6565 312.7968 312.9372 313.0775 313.2178 313.3580 313.4983 313.6385 313.7788 313.9190 314.0592 314.1993 314.3395 314.4796 314.6198 314.7599 314.9000 315.0400 315.1801 315.3201 315.4602 315.6002 315.7402 315.8802 316.0201 316.1601 316.3000 316.4399 316.5798 316.7197 316.8596 316.9994 317.1393 317.2791 317.4189 317.5587 317.6985 317.8382 317.9780 318.1177 318.2575 318.3972 318.5368 318.6765 318.8162 318.9558 319.0955 319.2351 319.3747 319.5143 319.6539 319.7934 319.9330 320.0725 320.2120 320.3515 320.4910 320.6305 320.7700 320.9094 321.0489 321.1883 321.3277 321.4671 321.6065 321.7459 321.8852 322.0246 322.1639 322.3032 322.4426 322.5819 322.7211 322.8604 322.9997 323.1389 323.2782 323.4174 323.5566 323.6958 323.8350 323.9741 324.1133 324.2525 324.3916 324.5307 324.6698 324.8089 324.9480 325.0871 325.2262 325.3652 325.5043 325.6433 325.7823 325.9213 326.0603 326.1993 326.3383
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-451: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240607T225819.4Z 8924.957170 122 1 50.90 2 58.07 83.09 72.07 68.12 0.00 1 0.00 1 7 250 3.952e-02 3.118e-02 2.133e-03 1.147e-03 -3.345445e-05 4.656447e-07 3.992260e-07 4.920518e-07 2.049404e-05 232.43 -2.00 3.40 -2.00 321.42 0.00e+00 1.936103e-02 1.647057e-04 1.231264e-04 1.820667e-05 5.224758e-03 288.98 -2.00 20.00 -2.00 320.99 0.00e+00 2.010412e-02 2.263373e-04 1.015266e-04 3.269952e-05 8.780957e-03 288.98 -2.00 20.00 -2.00 321.37 0.00e+00 9.686238e-03 3.179297e-04 1.473141e-03 3.541184e-05 9.390995e-03 288.98 -2.00 20.00 -2.00 321.25 0.00e+00 1.170458e-01 1.775068e-03 4.035613e-03 1.979971e-03 5.423632e-02 -628.73 17.96 0.00 16.58 545.80 319.63 0.00e+00 5.105325e-04 8.035373e-05 6.600567e-05 4.234829e-05 1.296468e-03 288.98 -2.00 20.00 -2.00 316.63 0.00e+00 1.884 0.000 303.00 329.40 4 4.1522e+00 4.9656e-03 2.1343e-02 2.4784e-03 1.7631e-01 -1.0423e+00 6.2787e-03 1.7396e-02 3.8981e-04 1.8408e-01 6.0058e-01 3.6529e-03 6.4893e-03 8.4681e-05 1.0427e-01 -4.7841e-01 1.9371e-03 2.7969e-03 4.5386e-05 4.8317e-02 2.0023e-01 9.9532e-04 1.4333e-03 6.3709e-05 2.6071e-02 3.1903e-03 -3.7380e-01 1.4933e-03 3.3820e-03 3.3904e-05 2.9225e-02 2.4076e-02 4.9772e-05 9.9933e-05 9.5577e-07 1.7065e-03 1.0689e-01 -3.6125e-04 5.2222e+01 1.0124e-01 9.7262e-02 1.4836e-03 2.9703e+00 12 14 12 10 0 0 99.99 22.68 0.23 0.10689 0.29059 50 10 2 5 0 1017.860 26.41 20.00 22.68 30.16 30.4 1040.38 5226 7307 3683 2265 -6688 -5590 -1100 1081 883 1811 3030 612 -3394 295 -1116 -4316 -5797 -928 9555 9548 8340 8366 569 -7264 -9870 -5879 -4714 1283 2409 -2734 -6769 -5632 -7319 -6153 -1957 1134 4080 6698 7481 3805 511 -660 -422 -523 385 2302 2100 1769 636 -1194 -616 1323 6225 5448 4449 2663 -628 -1449 -881 -2541 -3282 -2017 -1419 -128 1455 5020 6309 4657 508 -4523 -5460 -3268 -1053 -1179 -3280 -3220 -220 844 -1036 -672 672 332 -1455 -4174 -7263 -7585 -5491 -270 4531 7957 4894 -111 1159 2015 2958 2799 -2235 -6071 -2891 1528 2379 1954 2161 3131 3447 2159 -485 -753 -162 -1467 -1751 -1385 1437 5350 6020 -631 -5344 -5054 -643 2838 385 -3069 -2072 -168 -545 -879 -205 -441 1131 2506 -424 -3778 -1764 627 887 -1270 -2261 -1335 669 3966 3414 1426 -443 -2176 -777 900000 989 1431 762 497 -1576 -1372 -279 282 238 498 849 176 -1008 89 -351 -1393 -1895 -304 3092 3146 2834 2951 209 -2731 -3775 -2265 -1897 546 1107 -1345 -3495 -2986 -3970 -3386 -1083 633 2285 3767 4204 2172 299 -397 -262 -333 251 1524 1409 1192 430 -813 -426 945 4582 4123 3388 2002 -466 -1077 -671 -2015 -2704 -1694 -1200 -107 1194 4016 4940 3634 405 -3748 -4735 -2943 -978 -1125 -3213 -3238 -226 879 -1081 -693 676 325 -1400 -4021 -7135 -7716 -5821 -296 5071 8911 5409 -121 1241 2193 3312 3210 -2609 -7249 -3523 1901 3011 2487 2728 3871 4171 2578 -581 -917 -202 -1862 -2246 -1774 1829 6729 7474 -776 -6535 -6219 -807 3654 505 -4094 -2801 -230 -764 -1256 -296 -644 1656 3653 -615 -5450 -2545 917 1330 -1958 -3582 -2168 1111 6659 5773 2419 -752 -3715 -1335 900000
SS 20240607T232659.5Z 8924.977077 135 1 3.58 2 52.24 86.87 66.77 71.34 0.00 1 0.00 1 7 263 3.702e-02 2.841e-02 8.657e-03 5.663e-03 -3.245117e-05 2.348837e-06 3.597264e-07 4.919766e-07 1.923384e-05 232.43 -2.00 3.40 -2.00 320.95 0.00e+00 1.690342e-02 7.938551e-04 2.979682e-05 1.811471e-05 4.961076e-03 288.98 -2.00 20.00 -2.00 320.46 0.00e+00 2.006780e-02 1.117666e-03 1.185415e-04 3.269855e-05 8.238222e-03 288.98 -2.00 20.00 -2.00 321.04 0.00e+00 9.043566e-03 1.474270e-03 1.183463e-03 3.543242e-05 8.779909e-03 288.98 -2.00 20.00 -2.00 320.82 0.00e+00 1.158291e-01 8.291977e-03 2.952149e-03 1.979813e-03 5.045773e-02 -505.41 75.67 0.00 14.50 457.48 319.66 0.00e+00 1.861070e-03 3.346174e-04 5.315278e-05 4.234703e-05 1.228289e-03 288.98 -2.00 20.00 -2.00 315.81 0.00e+00 1.629 0.000 303.00 329.40 4 5.3526e+00 2.4125e-02 1.8440e-02 2.4770e-03 1.6473e-01 -8.5846e-01 2.9202e-02 1.3382e-02 3.7852e-04 1.7212e-01 4.5648e-01 1.6800e-02 4.6343e-03 7.8123e-05 9.7680e-02 -3.4350e-01 7.8201e-03 1.3157e-03 2.6765e-05 4.1495e-02 1.5004e-01 4.2663e-03 8.6112e-04 5.1391e-05 2.2600e-02 1.0970e-03 -3.6291e-01 7.2780e-03 2.4163e-03 3.1514e-05 3.0240e-02 2.3886e-02 2.4525e-04 7.7940e-05 8.6603e-07 1.6095e-03 1.2519e-01 -3.0060e-04 5.0810e+01 5.0926e-01 8.6001e-02 1.5838e-03 2.9263e+00 12 15 13 12 1 1 999.00 22.83 0.31 0.12519 0.30744 1 5 1 5 0 1785.300 26.51 20.00 22.83 32.84 30.4 1058.25 -2996 6231 4343 5035 -13083 3596 -710 1760 -1954 810 -7664 863 1064 3137 -2776 -2406 -4753 -4517 9382 8516 6661 7952 3721 -5214 -9847 -6458 1547 1286 5448 -1984 -5031 -2969 -5464 -6321 -635 1693 2237 5249 2776 2018 2691 143 2195 624 -60 1132 982 3604 -633 -1008 -2800 1953 3367 4804 3441 3802 -3448 -1916 -621 -2346 -2051 -2238 -2336 -737 1672 5657 4726 2904 -1518 -3859 -3925 -2927 -1060 -376 -3657 -1633 36 866 -1629 454 281 -1079 -1064 -5692 -5721 -6759 -2820 842 3997 6497 3389 -440 1030 2055 3910 1438 -2664 -5311 -2034 2255 1510 2608 2492 3224 3326 1663 -470 -756 745 -1714 -898 -798 2779 5272 4427 -1514 -4012 -4347 -423 2273 -606 -3111 -1662 -1092 -897 -917 -682 -631 869 2093 -488 -3417 -1153 931 173 -1656 -1773 -1055 1112 3212 2974 875 -384 -1448 -199 900000 -788 1657 1212 1476 -4221 1155 -240 608 -700 294 -2901 323 405 1219 -1126 -983 -1961 -1881 3783 3486 2807 3445 1654 -2382 -4594 -3027 738 659 2950 -1152 -3038 -1823 -3428 -4042 -404 1085 1446 3382 1801 1312 1762 97 1512 441 -43 831 728 2646 -471 -751 -2139 1518 2714 3928 2825 3050 -2773 -1528 -505 -1982 -1786 -1991 -2091 -652 1446 4753 3909 2389 -1274 -3336 -3535 -2739 -1019 -368 -3697 -1682 38 923 -1745 477 290 -1087 -1043 -5620 -5686 -6968 -2997 926 4501 7314 3763 -481 1111 2249 4373 1656 -3109 -6320 -2466 2773 1896 3264 3093 3919 3957 1956 -553 -906 908 -2143 -1130 -1005 3456 6495 5403 -1827 -4788 -5228 -518 2845 -773 -4015 -2165 -1450 -1212 -1260 -949 -885 1223 2928 -679 -4731 -1596 1303 248 -2439 -2677 -1633 1752 5126 4763 1406 -616 -2328 -321 900000