File name: Pandora118s1_Cabauw_20211003_L2Fit_fsus1c7d20210820p1-8.txt File generation date: 20241001T093533.7Z Data description: Level 2 spectral fitting results file Data file version: fsus1c7p1-8 Local principal investigator: Ankie Piters Network principal investigator: Alexander Cede Instrument type: Pandora Instrument number: 118 Spectrometer number: 1 Processing software version used: BlickP v1.8.60 Instrument operation file used: Pandora118_OF_v3d20200505.txt Instrument calibration file used: Pandora118s1_CF_v7d20210820.txt Level 1 file used: Pandora118s1_Cabauw_20211003_L1_smca1c7d20210820p1-8.txt Full location name: Cabauw Short location name: Cabauw Country of location: Netherlands Location latitude [deg]: 51.9704 Location longitude [deg]: 4.9262 Location altitude [m]: 0 Local noon date: 20211003 Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method) Data caveats: newDate as OF is out there First and last pixel inside fitting window: 241 385 Nominal wavelengths inside fitting window [nm]: 306.0867 306.2277 306.3686 306.5096 306.6506 306.7915 306.9324 307.0734 307.2143 307.3552 307.4961 307.6369 307.7778 307.9186 308.0595 308.2003 308.3411 308.4819 308.6227 308.7635 308.9043 309.0451 309.1858 309.3266 309.4673 309.6080 309.7487 309.8894 310.0301 310.1708 310.3114 310.4521 310.5927 310.7333 310.8739 311.0145 311.1551 311.2957 311.4363 311.5769 311.7174 311.8579 311.9985 312.1390 312.2795 312.4200 312.5604 312.7009 312.8414 312.9818 313.1222 313.2627 313.4031 313.5435 313.6839 313.8242 313.9646 314.1050 314.2453 314.3856 314.5259 314.6663 314.8065 314.9468 315.0871 315.2274 315.3676 315.5079 315.6481 315.7883 315.9285 316.0687 316.2089 316.3490 316.4892 316.6293 316.7695 316.9096 317.0497 317.1898 317.3299 317.4700 317.6101 317.7501 317.8902 318.0302 318.1702 318.3102 318.4502 318.5902 318.7302 318.8701 319.0101 319.1500 319.2900 319.4299 319.5698 319.7097 319.8496 319.9894 320.1293 320.2691 320.4090 320.5488 320.6886 320.8284 320.9682 321.1080 321.2477 321.3875 321.5272 321.6670 321.8067 321.9464 322.0861 322.2258 322.3654 322.5051 322.6448 322.7844 322.9240 323.0636 323.2032 323.3428 323.4824 323.6220 323.7615 323.9011 324.0406 324.1801 324.3197 324.4592 324.5986 324.7381 324.8776 325.0170 325.1565 325.2959 325.4353 325.5747 325.7141 325.8535 325.9929 326.1322 326.2716 --------------------------------------------------------------------------------------- Column 1: Two letter code of measurement routine Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601) Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.) Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.) Column 6: Total duration of measurement set in seconds Column 7: Data processing type index Column 8: Solar zenith angle for center-time of measurement in degree Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise Column 10: Lunar zenith angle for center-time of measurement in degree Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4) Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done Column 18: rms of unweighted fitting residuals, -9=fitting not successful Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 27: Bromine oxide effective temperature [K] Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 38: Formaldehyde effective temperature [K] Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 49: Nitrous acid effective temperature [K] Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 60: Nitrogen dioxide effective temperature [K] Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 71: Ozone effective temperature [K] Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful Column 83: Sulfur dioxide effective temperature [K] Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting Column 91: Lower limit used for wavelength scaling [nm] Column 92: Upper limit used for wavelength scaling [nm] Column 93: Order of smoothing polynomial Column 94: Smoothing polynomial coefficient, order 0 Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful Column 99: Smoothing polynomial coefficient, order 1 Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful Column 104: Smoothing polynomial coefficient, order 2 Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful Column 109: Smoothing polynomial coefficient, order 3 Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful Column 114: Smoothing polynomial coefficient, order 4 Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful Column 119: Mean value of measured data inside fitting window [same units as measurements] Column 120: Offset polynomial coefficient, order 0 Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful Column 125: Wavelength change polynomial coefficient, order 0 Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination Column 132: Resolution change polynomial coefficient, order 0 Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1) Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1) Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined Column 144: Wavelength effective temperature [°C], 999=no effective temperature given Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher) Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting Column 148: Number of bright count cycles Column 149: Number of dark count cycles Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal Column 153: Integration time [ms] Column 154: Temperature at electronics board [°C], 999=no temperature signal Column 155: Spectrometer control temperature [°C], 999=no temperature signal Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal Column 157: Temperature in head sensor [°C], 999=no temperature signal Column 158: Humidity in head sensor [%], -9=no humidity signal Column 159: Pressure in head sensor [hPa], -9=no pressure signal Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given --------------------------------------------------------------------------------------- SS 20211003T154252.7Z 7946.654776 504 1 49.35 2 77.47 246.01 82.61 283.43 0.00 1 0.00 1 0 49 7.255e-02 2.129e-03 4.000e-02 1.612e-03 1.007418e-06 5.943998e-07 1.188789e-07 3.892924e-07 3.178588e-05 226.15 -2.00 3.84 -2.00 323.32 0.00e+00 5.467987e-04 2.507737e-04 5.673983e-05 7.049287e-05 8.382985e-03 277.99 -2.00 20.00 -2.00 323.79 0.00e+00 1.524821e-03 3.241504e-04 9.705156e-06 2.643237e-05 1.575382e-02 277.99 -2.00 20.00 -2.00 322.81 0.00e+00 1.194395e-03 6.990047e-04 3.086273e-04 1.714147e-05 1.578887e-02 277.99 -2.00 20.00 -2.00 323.12 0.00e+00 5.783530e-01 3.345754e-03 9.198428e-04 1.033880e-03 9.162571e-02 225.77 1.32 0.00 0.08 155.25 321.27 0.00e+00 -1.817223e-04 3.790711e-04 6.974618e-05 2.596724e-05 2.361753e-03 277.99 -2.00 20.00 -2.00 320.35 0.00e+00 4.480 0.002 303.00 329.40 4 1.7634e+00 6.5753e-03 4.3464e-02 1.9867e-03 2.8169e-01 1.0863e-02 1.3084e-02 6.4781e-03 2.5594e-04 3.0253e-01 -7.2410e-03 6.9663e-03 1.3873e-03 9.9393e-05 1.6442e-01 -9.0101e-03 5.4602e-03 1.5954e-03 2.1719e-04 6.0863e-02 7.7316e-03 2.9077e-03 6.1654e-04 1.5342e-04 5.2170e-02 6.8765e-04 -2.9667e-03 3.1466e-04 8.8420e-05 1.0482e-05 8.8367e-04 -8.3906e-05 5.1856e-05 5.8415e-06 7.5972e-07 2.1413e-03 -5.9018e-03 0.0000e+00 -2.5957e-01 8.1638e-02 2.4814e-03 3.8418e-04 3.2750e+00 12 8 8 10 0 0 99.79 21.27 0.37 -0.00590 -0.00654 120 26 1 5 0 411.140 21.27 15.00 17.45 19.25 25.8 974.24 7583 15569 59129 -19975 26067 -2234 5716 -30861 9959 -2664 -1131 3452 -11671 1729 -7437 -2536 -7743 -11535 -4828 9878 2980 5098 -14790 4597 -2566 415 3933 -2802 -2663 834 -179 -367 819 766 2586 576 747 1683 1604 -598 266 -46 -225 451 2544 -230 6 -296 1051 1296 -1004 -676 271 -134 -851 596 -274 725 -505 276 -681 169 269 -396 28 -461 -178 -330 498 68 -761 215 -516 227 -193 27 85 -199 66 -399 137 -363 -98 230 147 43 -178 114 -60 201 97 219 78 -12 -106 0 103 -270 69 -110 116 101 86 21 -104 372 -62 -284 46 72 116 -156 -35 -93 89 311 304 -164 -217 -90 -213 -102 19 -21 -57 -24 -181 -32 30 72 120 19 -41 -60 44 10 -65 -20 -51 45 112 14 105 -32 -99 67 143 451 -253 267 -32 84 -724 191 -62 -28 88 -355 48 -225 -78 -277 -463 -192 348 107 178 -665 202 -139 25 243 -176 -171 59 -15 -38 92 96 336 80 105 236 231 -89 41 -7 -38 85 520 -52 1 -77 283 358 -281 -183 72 -38 -266 208 -99 265 -179 97 -249 69 126 -203 15 -237 -86 -144 194 26 -296 95 -271 137 -123 19 61 -154 51 -319 111 -290 -79 171 103 29 -127 92 -52 199 102 244 84 -12 -101 0 98 -278 70 -118 132 119 112 30 -142 524 -83 -357 56 90 153 -219 -48 -132 121 408 381 -198 -268 -108 -261 -141 28 -33 -88 -39 -312 -56 55 133 225 36 -72 -105 72 17 -115 -37 -99 94 248 32 250 -79 -242 SS 20211003T163416.3Z 7946.690466 522 1 48.13 2 84.97 256.53 90.02 292.93 0.00 1 0.00 1 0 241 1.295e-01 5.542e-02 1.292e-01 2.786e-02 4.188167e-05 1.142785e-05 2.436961e-06 3.894969e-07 5.514101e-05 226.14 -2.00 3.84 -2.00 324.14 0.00e+00 1.003808e-02 5.442290e-03 1.982180e-03 7.038797e-05 1.495742e-02 277.98 -2.00 20.00 -2.00 324.87 0.00e+00 3.084315e-02 7.332185e-03 5.939568e-04 2.625456e-05 2.734131e-02 277.98 -2.00 20.00 -2.00 323.63 0.00e+00 7.194888e-02 1.316746e-02 7.536449e-03 1.717595e-05 2.826265e-02 277.98 -2.00 20.00 -2.00 323.98 0.00e+00 3.891186e-01 4.231878e-02 2.321362e-02 1.033171e-03 1.647441e-01 46.02 22.68 0.00 0.07 273.62 320.38 0.00e+00 -1.443301e-02 3.041473e-03 8.340388e-04 2.591521e-05 4.035186e-03 277.98 -2.00 20.00 -2.00 319.21 0.00e+00 9.775 0.021 303.00 329.40 4 -7.4123e-01 1.9007e-01 1.0202e-01 1.9863e-03 5.0198e-01 1.3981e+00 8.0278e-02 1.0367e-01 3.1817e-04 5.4067e-01 -1.1760e+00 7.5483e-02 4.1589e-02 8.8787e-05 2.9343e-01 1.0003e-01 3.2129e-02 1.8827e-02 4.3461e-05 9.8815e-02 1.8232e-01 2.8571e-02 1.7390e-03 4.1536e-05 7.5180e-02 6.8249e-06 1.9548e+00 1.8773e-01 4.3413e-09 1.2967e-11 1.3273e-07 -8.3711e-03 1.0482e-03 2.2597e-04 7.4249e-07 3.8279e-03 -4.9981e-03 0.0000e+00 5.7318e+00 7.9055e-01 7.6343e-02 2.3527e-04 3.0656e+00 12 13 8 11 32 0 7.86 21.27 1.93 -0.00500 -0.06887 14 3 1 5 0 3437.000 21.27 15.00 17.44 18.28 25.9 968.27 -39646 -24297 1809 -20068 -3635 -4764 612 4204 30914 26025 28515 19461 1692 3271 1862 2592 10675 14883 11013 32258 7581 4315 -33827 -5755 -14065 -14475 10116 -8137 -13207 -9704 13492 12717 30348 32855 34751 19889 4613 12285 12481 -3711 1625 -292 -3276 5633 30899 283 -4096 1940 8628 21641 750 -2188 -2331 -19528 -6998 1164 8306 6265 1753 -5559 -12753 -5645 -4855 1965 9093 514 -1303 4599 -2120 -19075 -28303 -24261 -13842 -383 152 11869 -7851 5927 9639 1196 -1516 -2724 -7986 -12500 -21443 -16961 -15636 -6999 9523 5732 8093 19258 11326 17228 3069 -6882 -11814 -9476 4184 9685 2366 3954 4369 7430 6225 10462 2606 -2649 -6741 -5502 -8112 -6332 -1681 4928 7762 8271 -3631 -1708 -6936 -2783 -7956 -2881 -3398 3644 1512 1139 -7421 -1604 98 -2297 3019 2823 6331 -2190 2758 3648 -7582 -2582 -1293 3655 2053 3271 2789 -1818 -3089 -6104 -4017 131 -5458 -499 -942 146 1292 5082 5853 5080 4196 528 800 430 675 2736 4043 3789 4726 1863 656 -15268 -829 -2788 -3961 1380 -2140 -3751 -2862 2043 3158 6256 7788 7384 5779 1597 2402 2080 -1088 363 -65 -747 945 815 84 -1563 677 2505 3626 226 -553 -467 -6826 -1924 316 2217 1853 528 -1842 -4724 -1802 -1969 774 2834 181 -428 1039 -449 -5443 -9329 -8251 -5166 -143 72 4582 -4606 2662 4193 601 -721 -1212 -3602 -5246 -9607 -6477 -6713 -3319 4148 3598 6147 13444 8516 9570 1868 -4405 -7837 -6212 2242 5344 1797 3305 4148 7699 7086 11032 2859 -2826 -7159 -5808 -9262 -7281 -1899 5268 7992 8103 -3875 -1637 -7204 -2772 -9163 -3516 -4844 5332 2450 1909 -14327 -3070 194 -4824 6050 5554 11105 -4041 4657 5923 -14144 -4875 -2730 8317 5366 9298 8438 -5966 -10248