File name: Pandora118s1_Cabauw_20211206_L2Fit_fsus1c7d20210820p1-8.txt
File generation date: 20241001T101141.8Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c7p1-8
Local principal investigator: Ankie Piters
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 118
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora118_OF_v3d20200505.txt
Instrument calibration file used: Pandora118s1_CF_v7d20210820.txt
Level 1 file used: Pandora118s1_Cabauw_20211206_L1_smca1c7d20210820p1-8.txt
Full location name: Cabauw
Short location name: Cabauw
Country of location: Netherlands
Location latitude [deg]: 51.9704
Location longitude [deg]: 4.9262
Location altitude [m]: 0
Local noon date: 20211206
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: newDate as OF is out there
First and last pixel inside fitting window: 241 385
Nominal wavelengths inside fitting window [nm]: 306.0867 306.2277 306.3686 306.5096 306.6506 306.7915 306.9324 307.0734 307.2143 307.3552 307.4961 307.6369 307.7778 307.9186 308.0595 308.2003 308.3411 308.4819 308.6227 308.7635 308.9043 309.0451 309.1858 309.3266 309.4673 309.6080 309.7487 309.8894 310.0301 310.1708 310.3114 310.4521 310.5927 310.7333 310.8739 311.0145 311.1551 311.2957 311.4363 311.5769 311.7174 311.8579 311.9985 312.1390 312.2795 312.4200 312.5604 312.7009 312.8414 312.9818 313.1222 313.2627 313.4031 313.5435 313.6839 313.8242 313.9646 314.1050 314.2453 314.3856 314.5259 314.6663 314.8065 314.9468 315.0871 315.2274 315.3676 315.5079 315.6481 315.7883 315.9285 316.0687 316.2089 316.3490 316.4892 316.6293 316.7695 316.9096 317.0497 317.1898 317.3299 317.4700 317.6101 317.7501 317.8902 318.0302 318.1702 318.3102 318.4502 318.5902 318.7302 318.8701 319.0101 319.1500 319.2900 319.4299 319.5698 319.7097 319.8496 319.9894 320.1293 320.2691 320.4090 320.5488 320.6886 320.8284 320.9682 321.1080 321.2477 321.3875 321.5272 321.6670 321.8067 321.9464 322.0861 322.2258 322.3654 322.5051 322.6448 322.7844 322.9240 323.0636 323.2032 323.3428 323.4824 323.6220 323.7615 323.9011 324.0406 324.1801 324.3197 324.4592 324.5986 324.7381 324.8776 325.0170 325.1565 325.2959 325.4353 325.5747 325.7141 325.8535 325.9929 326.1322 326.2716
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20211206T114005.1Z 8010.486171 186 1 43.28 2 74.54 182.07 83.86 151.83 0.00 1 0.00 1 0 145 1.171e-01 9.762e-03 1.175e-01 4.962e-03 -1.130659e-07 1.786728e-06 4.985045e-08 3.820770e-07 4.955128e-05 220.46 -2.00 3.84 -2.00 323.08 0.00e+00 4.738580e-04 7.427000e-04 3.754493e-05 6.947242e-05 1.346630e-02 269.68 -2.00 20.00 -2.00 323.46 0.00e+00 6.167602e-05 9.623813e-04 1.274905e-05 2.625505e-05 2.512774e-02 269.68 -2.00 20.00 -2.00 322.62 0.00e+00 3.613696e-03 1.956230e-03 4.393419e-04 1.628913e-05 2.501011e-02 269.68 -2.00 20.00 -2.00 322.90 0.00e+00 5.176137e-01 9.486369e-03 1.461950e-03 1.034081e-03 1.471911e-01 218.41 4.10 0.00 0.09 254.55 320.76 0.00e+00 -1.325328e-04 9.063606e-04 6.871121e-05 2.461334e-05 3.560867e-03 269.68 -2.00 20.00 -2.00 319.94 0.00e+00 3.684 0.001 303.00 329.40 4 4.3678e+00 1.8170e-02 3.5647e-02 1.9830e-03 4.5154e-01 1.1395e-01 3.4256e-02 7.6967e-03 2.5095e-04 4.8905e-01 -1.0272e-01 1.9718e-02 2.7559e-03 7.8576e-05 2.6382e-01 1.0857e-01 1.5095e-02 5.1249e-04 7.8125e-05 8.9701e-02 -4.2979e-02 7.7462e-03 2.7388e-04 8.9827e-05 6.9172e-02 1.0331e-04 2.1477e-02 3.1673e-03 1.6376e-09 2.8002e-10 1.3671e-07 3.8010e-04 1.5541e-04 7.8970e-06 6.5142e-07 3.3861e-03 1.6092e-02 0.0000e+00 8.5782e-01 2.9647e-01 3.3279e-03 6.9053e-04 6.1086e+00 12 9 9 12 1 1 99.99 20.67 0.32 0.01609 0.01899 17 5 1 5 0 2394.430 20.67 15.01 16.62 10.18 26.6 946.56 25211 -25765 38601 -67070 -29880 1504 -16772 19617 28886 7390 29065 -6203 3693 41 -9836 -21323 -18189 -13917 -19112 13868 -11604 41512 -43912 25089 -5036 958 4021 -3950 8943 -5975 20024 5614 8181 1036 7497 8501 -3089 8910 6287 3891 3898 522 2284 4975 585 -566 1101 -2801 -1378 3477 -2224 4786 496 97 -1319 2155 355 1683 1146 -821 -2365 -1970 -1882 -442 -1526 -1187 -2927 3346 -1544 105 -2307 -915 -2071 -950 623 -38 381 -461 602 -406 -626 -84 -890 785 -1548 -350 -597 871 2256 1222 313 242 -1045 168 17 -985 -479 -1 566 2260 -198 77 321 -604 -95 448 803 -736 -368 770 -198 -317 -279 1516 -316 291 1247 -584 -362 -1063 -91 -207 -735 165 -201 783 -1136 338 -246 513 18 -57 -169 -370 198 -546 -405 23 236 -29 -122 448 -25 253 -148 118 -390 328 -2182 -674 28 -539 477 727 274 878 -310 169 2 -529 -1402 -1263 -985 -1490 727 -758 1364 -4314 1321 -430 87 360 -360 733 -661 2023 810 1336 197 1398 1613 -657 1689 1238 784 799 113 516 1206 161 -169 344 -943 -471 1151 -761 1493 161 33 -504 885 160 744 485 -350 -1057 -978 -1046 -257 -907 -681 -1609 1588 -697 45 -1042 -461 -1216 -622 442 -29 297 -383 518 -362 -563 -74 -749 608 -1155 -251 -452 723 2061 1250 351 278 -1171 174 16 -922 -470 -1 605 2499 -234 97 433 -861 -136 620 1058 -933 -456 969 -261 -438 -392 2064 -424 378 1546 -710 -426 -1240 -112 -279 -1062 249 -312 1244 -1909 587 -438 919 33 -101 -290 -615 318 -885 -686 42 453 -59 -264 1004 -57 592 -346
SS 20211206T120703.5Z 8010.504902 198 1 4.58 2 74.93 188.51 82.14 157.41 0.00 1 0.00 1 0 145 1.589e-01 1.122e-02 1.721e-01 1.116e-02 2.053338e-06 3.993547e-06 2.288545e-07 3.820633e-07 6.633409e-05 220.46 -2.00 3.84 -2.00 322.87 0.00e+00 -6.128462e-04 1.620975e-03 1.330458e-04 6.951240e-05 1.826514e-02 269.68 -2.00 20.00 -2.00 323.13 0.00e+00 3.458701e-03 2.127155e-03 7.343300e-05 2.625470e-05 3.359588e-02 269.68 -2.00 20.00 -2.00 322.46 0.00e+00 7.264855e-03 4.172177e-03 4.950864e-04 1.620851e-05 3.394798e-02 269.68 -2.00 20.00 -2.00 322.69 0.00e+00 5.034990e-01 1.933682e-02 1.311333e-03 1.034183e-03 1.994761e-01 205.31 8.43 0.00 0.09 337.31 320.42 0.00e+00 -9.187977e-04 1.868690e-03 4.103492e-04 2.462203e-05 4.859986e-03 269.68 -2.00 20.00 -2.00 319.64 0.00e+00 3.773 0.001 303.00 329.40 4 3.3656e+00 3.5701e-02 3.6749e-02 1.9836e-03 6.0935e-01 -4.2295e-02 6.6858e-02 1.0320e-02 2.5100e-04 6.5967e-01 -1.3854e-02 3.8086e-02 3.2722e-03 7.5887e-05 3.5810e-01 4.9459e-02 2.9565e-02 2.9549e-04 7.2734e-05 1.2094e-01 -2.1268e-02 1.6347e-02 4.0584e-04 8.6827e-05 9.2561e-02 2.7263e-04 9.2068e-03 3.7086e-03 4.9010e-09 2.2574e-10 1.7493e-07 -2.2524e-05 3.3539e-04 4.9605e-06 6.3804e-07 4.5738e-03 1.6367e-02 0.0000e+00 5.3979e-02 6.3617e-01 1.1323e-02 6.3777e-04 8.0818e+00 12 9 9 12 1 1 999.00 20.67 0.37 0.01637 0.01620 1 5 1 5 0 2202.720 20.67 15.02 16.64 9.97 26.5 944.98 -56448 -48477 96909 -60606 94961 955 -1090 -16339 23454 -11365 15053 28773 667 8953 -15359 -10263 -21178 983 4497 10546 -2165 -7221 -20999 -6923 1452 12066 -1251 22402 -15566 -11768 2154 1351 9808 -71 11105 121 2772 -3186 9327 -694 -4400 7143 -4682 3283 6377 89 -3505 2919 931 2347 -1008 -2291 990 -1402 701 2931 64 475 -2791 1500 -416 -2319 1090 1211 -132 -1813 -1355 -2529 -2170 711 320 325 -1046 -388 -956 -139 3 1086 1105 341 427 -109 -2619 -738 -1628 1748 -2762 2086 -1354 -591 1522 -1184 375 436 2685 -275 -274 -557 -312 1482 -131 1532 499 915 -533 519 -1058 -385 506 -85 1071 -1918 934 182 -714 674 625 128 255 -1733 -1380 -599 759 399 144 -143 -428 -1039 395 532 -51 -499 86 167 436 4 503 -1505 1086 -198 -190 334 637 -663 88 -1227 -1109 1024 -1821 1003 20 -30 -661 701 -546 585 1012 33 412 -919 -628 -1605 64 296 644 -142 -485 -1752 -579 128 1081 -132 1754 -1840 -1522 290 223 1733 -15 2211 27 614 -748 1980 -163 -1089 1636 -1260 900 1846 29 -1261 1029 345 874 -379 -850 356 -540 291 1318 32 235 -1361 701 -203 -1263 642 751 -84 -1136 -805 -1400 -1103 341 159 181 -670 -274 -738 -112 3 939 992 316 397 -100 -2338 -613 -1299 1332 -2279 1819 -1331 -632 1733 -1406 427 468 2641 -268 -280 -600 -346 1685 -157 1923 673 1284 -760 718 -1424 -494 634 -110 1417 -2685 1303 252 -968 886 798 160 308 -2096 -1761 -822 1092 600 221 -227 -705 -1785 684 930 -91 -873 145 273 691 7 836 -2680 2017 -389 -393 717 1400 -1486 194