File name: Pandora118s1_Cabauw_20230217_L2Fit_fsus1c7d20210820p1-8.txt
File generation date: 20241001T173852.0Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c7p1-8
Local principal investigator: Ankie Piters
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 118
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora118_OF_v3d20200505.txt
Instrument calibration file used: Pandora118s1_CF_v7d20210820.txt
Level 1 file used: Pandora118s1_Cabauw_20230217_L1_smca1c7d20210820p1-8.txt
Full location name: Cabauw
Short location name: Cabauw
Country of location: Netherlands
Location latitude [deg]: 51.9704
Location longitude [deg]: 4.9262
Location altitude [m]: 0
Local noon date: 20230217
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: newDate as OF is out there
First and last pixel inside fitting window: 241 385
Nominal wavelengths inside fitting window [nm]: 306.0867 306.2277 306.3686 306.5096 306.6506 306.7915 306.9324 307.0734 307.2143 307.3552 307.4961 307.6369 307.7778 307.9186 308.0595 308.2003 308.3411 308.4819 308.6227 308.7635 308.9043 309.0451 309.1858 309.3266 309.4673 309.6080 309.7487 309.8894 310.0301 310.1708 310.3114 310.4521 310.5927 310.7333 310.8739 311.0145 311.1551 311.2957 311.4363 311.5769 311.7174 311.8579 311.9985 312.1390 312.2795 312.4200 312.5604 312.7009 312.8414 312.9818 313.1222 313.2627 313.4031 313.5435 313.6839 313.8242 313.9646 314.1050 314.2453 314.3856 314.5259 314.6663 314.8065 314.9468 315.0871 315.2274 315.3676 315.5079 315.6481 315.7883 315.9285 316.0687 316.2089 316.3490 316.4892 316.6293 316.7695 316.9096 317.0497 317.1898 317.3299 317.4700 317.6101 317.7501 317.8902 318.0302 318.1702 318.3102 318.4502 318.5902 318.7302 318.8701 319.0101 319.1500 319.2900 319.4299 319.5698 319.7097 319.8496 319.9894 320.1293 320.2691 320.4090 320.5488 320.6886 320.8284 320.9682 321.1080 321.2477 321.3875 321.5272 321.6670 321.8067 321.9464 322.0861 322.2258 322.3654 322.5051 322.6448 322.7844 322.9240 323.0636 323.2032 323.3428 323.4824 323.6220 323.7615 323.9011 324.0406 324.1801 324.3197 324.4592 324.5986 324.7381 324.8776 325.0170 325.1565 325.2959 325.4353 325.5747 325.7141 325.8535 325.9929 326.1322 326.2716
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230217T144606.6Z 8448.615354 303 1 48.55 2 73.84 223.96 106.16 246.01 0.00 1 0.00 1 0 209 1.189e-01 2.756e-02 2.188e-01 1.722e-02 -2.274344e-05 6.365200e-06 1.436566e-06 3.862162e-07 5.034344e-05 223.79 -2.00 3.84 -2.00 323.20 0.00e+00 7.700317e-03 2.671187e-03 5.862785e-04 6.916184e-05 1.363487e-02 267.24 -2.00 20.00 -2.00 323.67 0.00e+00 2.679491e-03 3.572007e-03 4.449947e-04 2.622517e-05 2.526453e-02 267.24 -2.00 20.00 -2.00 322.71 0.00e+00 4.567497e-02 6.871698e-03 2.086257e-03 1.620850e-05 2.526109e-02 267.24 -2.00 20.00 -2.00 323.02 0.00e+00 3.305697e-01 2.603408e-02 3.473859e-03 1.033810e-03 1.490873e-01 131.29 16.46 0.00 0.20 253.21 320.43 0.00e+00 -4.160874e-03 2.776407e-03 7.262398e-04 2.422559e-05 3.540327e-03 267.24 -2.00 20.00 -2.00 319.94 0.00e+00 3.535 0.001 303.00 329.40 4 5.6069e+00 7.3178e-02 4.0535e-02 1.9816e-03 4.5519e-01 -3.1700e-02 7.2089e-02 2.9161e-02 2.5009e-04 4.9324e-01 -1.9793e-01 4.7016e-02 6.5813e-03 8.1515e-05 2.6752e-01 2.4847e-01 2.6245e-02 4.4327e-03 5.5119e-05 9.0422e-02 -1.0200e-01 1.9599e-02 8.7550e-04 7.7204e-05 6.9506e-02 2.1575e-05 2.5705e-01 3.1922e-02 7.0638e-09 1.7575e-10 1.3199e-07 2.2541e-03 6.0117e-04 2.4129e-05 6.5480e-07 3.4398e-03 6.7704e-03 0.0000e+00 4.8286e+00 1.1355e+00 4.6619e-02 7.1357e-04 6.3261e+00 12 8 8 10 0 0 99.99 21.06 2.26 0.00677 0.02397 25 5 1 5 0 1941.560 21.06 15.00 17.22 16.54 34.7 1074.96 -18916 3524 3932 -20807 -10639 -1975 198 9708 40832 14663 15581 -10851 5209 -7637 7804 34581 -3519 6472 -3511 27320 -21489 6198 -46347 4928 -14892 -1329 5624 -21526 -14239 -9234 12831 23961 17898 23783 9447 19788 5846 63975 20134 7724 1509 -2877 -904 5560 30427 4853 -2265 2207 -4541 9613 -2171 -15613 6376 502 14698 571 7181 3376 -953 3571 -10964 2336 -1311 -3245 -3835 822 589 1075 186 -10958 -7291 -5243 -5869 -1244 -643 2231 330 5573 2780 -2536 -1890 -4151 -153 -2869 -5208 -4266 -3052 -2120 3730 986 4417 3877 -1450 4914 -1486 -4338 -1348 -2226 4654 5150 2895 -1256 1224 289 288 2064 85 528 -2082 -95 -1962 -3121 -1575 2815 3337 -407 7205 -3596 -3201 -2157 -2512 638 -3018 2283 -549 100 -2764 -158 1886 710 1956 -2846 1034 -1743 127 1194 -872 498 -194 1713 -696 310 982 -723 -340 -653 57 64 -1114 -415 -83 12 600 666 942 966 -1345 404 -777 475 564 -384 595 -417 837 -2539 211 -7768 216 -1608 -126 440 -2904 -1765 -1278 1485 3118 3309 4322 2239 3885 1372 3626 3496 1611 342 -690 -218 1325 5222 1390 -775 735 -1705 2983 -768 -6404 1952 180 4886 259 3182 1519 -416 1400 -5176 1041 -701 -1882 -2257 442 299 490 76 -4850 -3172 -2589 -3480 -803 -456 1599 253 4320 2328 -2288 -1683 -3659 -119 -2105 -3644 -2869 -2158 -1687 3200 995 4764 4291 -1599 4644 -1375 -3998 -1269 -2254 4576 5373 3289 -1596 1648 416 417 2830 112 645 -2545 -116 -2551 -4312 -2200 3728 4277 -517 7929 -4234 -3638 -2391 -2996 810 -4298 3274 -833 155 -4659 -276 3332 1291 3561 -5267 1759 -2938 202 1881 -1469 895 -382 3579 -1602 742 2396 -1810 -836
SS 20230217T152835.2Z 8448.644852 331 1 49.68 2 78.75 233.39 111.95 253.35 0.00 1 0.00 1 0 177 1.453e-01 1.941e-02 2.293e-01 1.143e-02 -9.314070e-06 4.472838e-06 7.366223e-07 3.863892e-07 6.155359e-05 223.79 -2.00 3.84 -2.00 323.81 0.00e+00 4.125874e-03 1.995707e-03 6.585810e-04 6.895501e-05 1.666114e-02 267.24 -2.00 20.00 -2.00 324.53 0.00e+00 2.087426e-03 2.651251e-03 4.637713e-04 2.627014e-05 3.090364e-02 267.24 -2.00 20.00 -2.00 323.25 0.00e+00 2.629080e-02 5.766732e-03 1.606083e-03 1.710617e-05 3.086379e-02 267.24 -2.00 20.00 -2.00 323.64 0.00e+00 5.473843e-01 2.321781e-02 4.288324e-03 1.033268e-03 1.831793e-01 174.01 8.91 0.00 0.07 309.86 321.96 0.00e+00 -6.266048e-03 2.849083e-03 2.511410e-03 2.402119e-05 4.341144e-03 267.24 -2.00 20.00 -2.00 321.17 0.00e+00 4.952 0.003 303.00 329.40 4 4.0163e+00 4.8593e-02 5.0404e-02 1.9827e-03 5.5800e-01 2.9544e-01 7.2495e-02 3.4588e-02 2.6230e-04 6.0315e-01 -6.4376e-01 4.1772e-02 1.7899e-02 9.7652e-05 3.2767e-01 5.1089e-01 2.4605e-02 6.8606e-03 7.2078e-05 1.1088e-01 -1.4745e-01 1.6431e-02 5.4973e-04 8.6623e-05 8.4914e-02 3.0725e-05 2.0239e-01 1.9263e-02 1.8332e-08 2.2501e-10 1.6141e-07 -3.0531e-04 4.2353e-04 6.7505e-05 7.1179e-07 4.1865e-03 2.1761e-02 0.0000e+00 3.2154e+00 5.8271e-01 4.0881e-03 5.8918e-04 6.1371e+00 12 8 8 10 0 0 100.00 21.17 0.67 0.02176 0.01943 23 5 1 5 0 2159.740 21.17 15.00 17.25 16.47 34.7 1073.93 14533 19703 19050 -13238 -4186 14696 8712 31709 51476 16175 44041 -943 10807 -14517 10650 17960 -1191 9503 -2703 29595 -26501 6886 -53403 6715 -5135 -885 13511 -23805 -11345 -17559 22948 22269 31740 23940 13089 31713 3786 66612 25137 20861 15697 2974 7042 7160 45292 221 4527 4584 -1958 21755 866 -11198 1197 -584 6686 5776 13896 8047 -1735 184 -10021 -246 1091 -1263 -944 4697 609 -783 -6598 -12073 -11166 -10858 1114 -2952 1666 -1053 656 2691 2963 164 -5058 -3316 -1436 -259 -5207 -3485 -3486 -2723 5253 1697 2816 1731 -1552 2285 -822 -2219 -2787 -1260 4000 3347 1584 -900 1740 -810 1352 815 -133 -109 -664 -241 -394 -411 -2419 1794 2824 -161 3798 -2639 -1865 -2141 -273 403 -1493 1588 -1149 411 -1879 456 67 265 605 -1148 1872 -2069 1399 59 -348 474 -834 769 -575 1206 -226 -145 -189 157 213 206 -672 -171 377 462 916 862 1007 485 -80 565 -1298 359 470 -83 514 -203 577 -2095 209 -6542 116 -266 -52 411 -2016 -690 -1608 912 1602 2451 2511 1734 2684 525 2597 1922 1684 1427 363 856 1006 3124 43 909 963 -468 3559 185 -2647 227 -121 1426 1460 3460 2157 -500 51 -3271 -81 408 -517 -383 1678 210 -241 -1919 -3583 -3477 -4048 439 -1443 872 -602 385 1653 1896 110 -3564 -2221 -875 -142 -2858 -1861 -2039 -1837 3781 1465 2695 1722 -1511 1954 -654 -1707 -2260 -1073 3386 3069 1593 -1016 2121 -1091 1826 1082 -169 -131 -787 -292 -496 -539 -3282 2291 3446 -194 4174 -2975 -2035 -2340 -321 528 -2187 2434 -1876 691 -3392 851 130 516 1185 -2218 3333 -3647 2305 98 -615 905 -1761 1734 -1422 3105 -613 -401 -519