File name: Pandora70s1_ChapelHillNC_20240223_L2Fit_fsus1c1d20210323p1-8.txt
File generation date: 20240224T053616.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Lukas Valin
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 70
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora70_OF_v7d20200416.txt
Instrument calibration file used: Pandora70s1_CF_v1d20210323.txt
Level 1 file used: Pandora70s1_ChapelHillNC_20240223_L1_smca1c1d20210323p1-8.txt
Full location name: Duke Forest, Chapel Hill (NC)
Short location name: ChapelHillNC
Country of location: USA
Location latitude [deg]: 35.9708
Location longitude [deg]: -79.0933
Location altitude [m]: 50
Local noon date: 20240223
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 285 430
Nominal wavelengths inside fitting window [nm]: 306.0162 306.1567 306.2973 306.4378 306.5783 306.7188 306.8593 306.9998 307.1402 307.2807 307.4211 307.5615 307.7020 307.8424 307.9828 308.1231 308.2635 308.4039 308.5442 308.6846 308.8249 308.9652 309.1055 309.2458 309.3861 309.5263 309.6666 309.8068 309.9470 310.0873 310.2275 310.3677 310.5078 310.6480 310.7882 310.9283 311.0685 311.2086 311.3487 311.4888 311.6289 311.7690 311.9090 312.0491 312.1891 312.3291 312.4692 312.6092 312.7492 312.8891 313.0291 313.1691 313.3090 313.4490 313.5889 313.7288 313.8687 314.0086 314.1484 314.2883 314.4282 314.5680 314.7078 314.8476 314.9874 315.1272 315.2670 315.4068 315.5465 315.6863 315.8260 315.9657 316.1054 316.2451 316.3848 316.5245 316.6641 316.8038 316.9434 317.0830 317.2226 317.3622 317.5018 317.6414 317.7810 317.9205 318.0601 318.1996 318.3391 318.4786 318.6181 318.7576 318.8970 319.0365 319.1759 319.3153 319.4548 319.5942 319.7336 319.8729 320.0123 320.1517 320.2910 320.4303 320.5696 320.7090 320.8482 320.9875 321.1268 321.2661 321.4053 321.5445 321.6838 321.8230 321.9622 322.1013 322.2405 322.3797 322.5188 322.6580 322.7971 322.9362 323.0753 323.2144 323.3534 323.4925 323.6316 323.7706 323.9096 324.0486 324.1876 324.3266 324.4656 324.6046 324.7435 324.8824 325.0214 325.1603 325.2992 325.4381 325.5769 325.7158 325.8547 325.9935 326.1323 326.2711
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240223T220020.5Z 8819.916904 538 1 1.34 2 78.25 248.60 95.21 67.08 0.00 1 0.00 1 0 193 1.298e-01 1.206e-02 2.695e-01 1.286e-02 3.735772e-06 5.106722e-06 5.992454e-07 3.578718e-07 5.594858e-05 225.66 -2.00 3.41 -2.00 323.59 0.00e+00 2.108942e-03 2.403174e-03 2.805750e-04 1.331889e-05 1.516479e-02 279.66 -2.00 20.00 -2.00 324.18 0.00e+00 2.426814e-03 2.856490e-03 2.430878e-04 2.425365e-05 2.774697e-02 279.66 -2.00 20.00 -2.00 323.05 0.00e+00 2.138286e-02 6.646437e-03 9.156077e-04 9.948799e-06 2.856942e-02 279.66 -2.00 20.00 -2.00 323.38 0.00e+00 6.492494e-01 2.858007e-02 8.298500e-04 1.577259e-03 1.678172e-01 201.33 9.46 0.00 0.33 281.11 321.84 0.00e+00 4.288866e-04 3.482550e-03 8.824087e-05 1.408962e-05 3.895677e-03 279.66 -2.00 20.00 -2.00 321.18 0.00e+00 4.755 0.002 303.00 329.40 4 1.5906e+00 5.0604e-02 4.7483e-02 1.8496e-03 5.1299e-01 -1.5175e-02 1.0061e-01 1.0213e-02 3.2328e-04 5.5278e-01 -4.8745e-01 6.6410e-02 1.9287e-03 1.3751e-04 2.9925e-01 5.7307e-01 3.8058e-02 8.4446e-04 8.2988e-05 1.0083e-01 -2.1173e-01 1.9830e-02 6.3683e-04 1.0304e-04 7.6903e-02 3.8204e-04 6.4822e-02 1.3993e-02 3.3289e-09 3.2767e-10 1.4317e-07 -5.1027e-04 4.5337e-04 4.4422e-06 6.9684e-07 4.0429e-03 -3.5355e-02 -1.5449e-04 6.6372e-01 6.4099e-01 5.5834e-03 4.9896e-04 5.4310e+00 12 9 9 12 1 1 999.00 22.37 0.32 -0.03535 -0.03925 2 24 4 8 0 445.310 20.02 22.37 19.87 26.62 26.41 29.3 965.10 900000 -39314 -45147 -29035 -59290 -23714 -48373 -25734 -6345 4455 -10476 2450 1887 -9483 -571 -17436 -20703 -20031 -2781 -646 -21328 -9662 -41763 -21381 -38282 -4208 -19816 3437 -7778 -16148 2456 -9287 13123 12841 28929 25377 19689 4325 10632 5324 3364 22386 9582 6386 -4927 8151 376 17234 5955 278 3044 1727 1540 2939 707 1506 7454 918 5552 2905 1499 -347 922 2574 -2545 2131 1129 1632 -5651 -1820 -5885 -7700 -8896 342 2418 -1371 3314 -2733 -375 -1684 418 -1235 -1286 311 -4683 1112 -3533 -2945 -2513 -1558 1511 1480 1325 -1317 496 -1586 -411 1663 822 -166 971 79 602 730 1377 1389 -402 -1 -1112 824 783 -77 1360 -603 238 399 2254 128 -468 -1777 -207 228 -1350 671 -199 840 -645 44 -1200 -596 250 -92 -369 -462 304 5 1047 416 -185 -476 -614 24 -409 605 86 333 900000 -479 -706 -354 -1471 -289 -1908 -796 -158 96 -396 64 47 -301 -10 -510 -734 -745 -59 -12 -687 -118 -1600 -587 -2209 -137 -1178 113 -281 -774 94 -621 791 994 1859 1836 1601 434 947 516 338 1716 958 736 -756 1162 65 2626 1093 56 600 332 283 525 138 330 1762 259 1507 793 423 -104 303 943 -1047 850 438 586 -1973 -556 -1830 -2595 -3542 147 1179 -777 1912 -1736 -246 -1164 290 -875 -898 204 -2999 652 -2153 -1902 -1825 -1274 1362 1479 1379 -1364 481 -1446 -349 1427 749 -158 964 84 686 903 1816 1889 -551 -2 -1438 1032 997 -102 1846 -843 325 530 2887 160 -571 -2151 -246 285 -1869 988 -314 1380 -1105 78 -2242 -1140 481 -180 -712 -859 542 9 1771 726 -347 -953 -1307 55 -979 1493 219 851
SS 20240223T222645.9Z 8819.935253 548 1 49.18 2 83.29 252.78 90.42 70.98 0.00 1 0.00 1 0 177 2.770e-01 1.479e-02 2.403e-01 7.246e-03 2.508227e-05 4.281052e-06 1.021865e-07 3.582269e-07 1.204963e-04 225.66 -2.00 3.41 -2.00 324.58 0.00e+00 2.660762e-04 2.153130e-03 4.932878e-04 1.260268e-05 3.255155e-02 279.66 -2.00 20.00 -2.00 325.36 0.00e+00 6.792647e-03 2.686162e-03 1.853046e-04 2.494266e-05 5.928501e-02 279.66 -2.00 20.00 -2.00 323.98 0.00e+00 -8.116647e-03 5.320429e-03 9.616212e-04 1.699740e-05 6.097274e-02 279.66 -2.00 20.00 -2.00 324.41 0.00e+00 1.111682e+00 2.327440e-02 3.169304e-03 1.575562e-03 3.622373e-01 229.31 5.05 0.00 0.20 607.53 323.61 0.00e+00 -5.970243e-04 4.400958e-03 3.544731e-05 1.273520e-05 8.197602e-03 279.66 -2.00 20.00 -2.00 322.93 0.00e+00 7.800 0.008 303.00 329.40 4 6.0097e-01 4.9221e-02 7.5784e-02 1.8524e-03 1.1054e+00 1.3325e+00 9.4297e-02 1.6528e-02 4.0351e-04 1.1882e+00 -1.9104e+00 4.7534e-02 4.6624e-03 1.7410e-04 6.4512e-01 1.2336e+00 3.8932e-02 1.0159e-04 8.3403e-05 2.1571e-01 -2.8093e-01 2.2689e-02 1.0964e-04 8.8590e-05 1.6295e-01 4.1804e-05 1.0778e-01 9.8670e-03 1.1457e-09 4.2520e-11 2.9800e-07 -7.0216e-04 3.2981e-04 5.7999e-06 8.1721e-07 8.5897e-03 -3.7956e-02 6.5274e-05 -5.7090e-02 2.6444e-01 5.4530e-03 3.2666e-04 7.7983e+00 12 8 8 10 0 0 96.45 22.40 0.53 -0.03796 -0.04331 57 12 4 8 0 862.630 20.01 22.40 20.19 26.62 26.41 29.4 967.59 900000 67514 64648 63531 40710 62663 45828 84983 95372 115555 112717 73737 67337 56514 50145 16041 30399 15203 22973 743 5847 -22171 -34059 -26870 -70808 987 6960 14069 -21900 -202 -12974 12001 17272 13048 28603 38928 13138 -7472 1986 4949 -10549 8037 -1327 -1252 2477 -7351 11846 18987 18779 9226 5163 30444 -5293 -21324 1818 -8880 -2294 -36055 -5204 16072 14145 6767 9257 10781 14175 16444 30248 -7652 -11147 -7287 -20695 -11454 -11278 -6 6678 4759 10183 6041 6937 6052 9663 -5685 -3074 2468 -4182 -6124 -10009 -5486 -626 769 -939 4973 1317 1973 1934 -1312 -1209 -6538 -886 -3747 -496 389 910 225 357 2501 1486 140 -1948 -1317 -1262 -694 -608 -415 1167 174 1593 -2102 2119 -1348 -548 -549 -99 67 -307 494 -1148 -77 -300 357 211 601 230 -258 149 -316 614 -239 300 -308 567 262 -55 490 -512 -251 900000 1608 1276 781 1045 873 1858 1280 1295 793 773 1974 1575 1193 641 497 481 401 328 20 67 -474 -889 -820 -7141 27 194 226 -768 -2 -336 152 335 424 598 432 398 -325 56 110 -380 171 -46 -52 121 -506 635 993 1035 614 352 961 -310 -1470 78 -582 -171 -5339 -523 1151 1154 693 1081 1461 1980 2204 2983 -1094 -1369 -713 -2429 -1351 -1714 -1 1294 1125 2485 1624 1949 1780 2765 -1922 -984 695 -1169 -1698 -3027 -1799 -236 348 -517 3016 889 1292 1174 -725 -594 -3402 -463 -2118 -292 254 671 194 351 2591 1589 150 -2064 -1369 -1349 -773 -703 -481 1271 181 1576 -2069 1945 -1262 -511 -571 -121 93 -483 843 -2122 -150 -622 762 454 1300 488 -517 277 -558 1049 -432 597 -684 1370 699 -161 1531 -1701 -853