File name: Pandora125s1_Cordoba_20201110_L2Fit_fout2c5d20170323p1-8.txt
File generation date: 20250311T142748.2Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c5p1-8
Local principal investigator: Marcelo Raponi
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 125
Spectrometer number: 1
Processing software version used: BlickP v1.8.74
Instrument operation file used: Pandora125_OF_v5d20170323.txt
Instrument calibration file used: Pandora125s1_CF_v5d20170323.txt
Level 1 file used: Pandora125s1_Cordoba_20201110_L1_smca1c5d20170323p1-8.txt
Full location name: CITEDEF/SMN Cordoba
Short location name: Cordoba
Country of location: Argentina
Location latitude [deg]: -31.6755
Location longitude [deg]: -63.8730
Location altitude [m]: 332
Local noon date: 20201110
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 213 355
Nominal wavelengths inside fitting window [nm]: 305.0083 305.1495 305.2906 305.4318 305.5729 305.7140 305.8551 305.9962 306.1373 306.2783 306.4194 306.5604 306.7015 306.8425 306.9835 307.1245 307.2655 307.4065 307.5474 307.6884 307.8294 307.9703 308.1112 308.2521 308.3930 308.5339 308.6748 308.8157 308.9565 309.0974 309.2382 309.3790 309.5198 309.6606 309.8014 309.9422 310.0830 310.2237 310.3645 310.5052 310.6459 310.7866 310.9273 311.0680 311.2087 311.3494 311.4900 311.6307 311.7713 311.9119 312.0525 312.1931 312.3337 312.4743 312.6149 312.7554 312.8960 313.0365 313.1770 313.3175 313.4580 313.5985 313.7390 313.8794 314.0199 314.1603 314.3008 314.4412 314.5816 314.7220 314.8624 315.0027 315.1431 315.2835 315.4238 315.5641 315.7044 315.8448 315.9851 316.1253 316.2656 316.4059 316.5461 316.6864 316.8266 316.9668 317.1070 317.2472 317.3874 317.5276 317.6677 317.8079 317.9480 318.0881 318.2282 318.3683 318.5084 318.6485 318.7886 318.9286 319.0687 319.2087 319.3488 319.4888 319.6288 319.7688 319.9087 320.0487 320.1887 320.3286 320.4685 320.6085 320.7484 320.8883 321.0282 321.1680 321.3079 321.4477 321.5876 321.7274 321.8672 322.0071 322.1468 322.2866 322.4264 322.5662 322.7059 322.8457 322.9854 323.1251 323.2648 323.4045 323.5442 323.6839 323.8235 323.9632 324.1028 324.2424 324.3820 324.5217 324.6612 324.8008 324.9404
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 97-239: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 240-382: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20201110T221315.1Z 7619.925869 176 1 50.18 2 83.74 253.31 143.20 239.88 0.00 1 0.00 1 0 25 6.683e-01 8.292e-02 6.018e-01 7.828e-02 8.830800e-01 4.589578e-02 9.257713e-03 -6.000000e+00 3.882017e-01 228.89 -2.00 3.11 -2.00 322.13 0.00e+00 -1.733978e-04 1.786341e-02 1.074998e-02 -6.000000e+00 1.918819e-02 285.17 -2.00 20.00 -2.00 321.51 0.00e+00 8.256 0.005 302.00 328.00 3 5.1886e-01 1.6039e-01 1.0980e-01 -6.0000e+00 9.7093e-01 1.9730e+00 1.8696e-01 9.1265e-02 -6.0000e+00 1.0594e+00 -2.0056e+00 1.1103e-01 2.7706e-02 -6.0000e+00 6.2392e-01 6.7980e-01 6.3030e-02 9.4407e-03 -6.0000e+00 2.6697e-01 3.2960e-05 -1.8333e-04 2.2489e-03 1.0117e-04 -6.0000e+00 1.8329e-02 -1.8613e-03 0.0000e+00 12 8 8 10 0 0 0.22 22.11 1.07 -0.00186 -0.00324 41 8 1 5 0 1223.675 27.78 20.03 22.11 179052 900000 900000 34749 900000 -37317 900000 -51352 -9641 900000 6712 900000 -1297 -5529 106776 98587 138062 4562 22496 110273 -47095 84453 123839 -3409 195478 49746 168585 41302 1248 -121845 900000 -42533 900000 328 900000 68670 60871 -74602 1130 900000 84951 46699 206626 -22377 39090 -31233 -53744 -6428 189680 -30340 -48207 24634 233895 143685 155141 121426 55027 -49285 3263 894 -39194 3666 45596 6380 900000 102305 90513 36447 -34220 108969 17750 124549 109435 2388 11350 -3172 -50002 40922 196682 44259 13180 23151 49412 42706 24896 24309 6953 427 5567 17464 54316 9833 -1698 -16399 35217 -7226 13722 -7721 16037 -17238 1929 14130 -18456 -13400 -5034 -19903 11120 16772 -658 25087 -5072 -4223 -2415 7281 -2262 2223 4578 -7108 9766 -1305 13390 -3208 5305 -1086 -6840 899 -2298 1038 2117 -5609 4426 -5353 1890 792 -1422 385 -1535 2459 141 -632 -1860 2717 412 13640 900000 900000 2813 900000 -3998 900000 -5868 -758 900000 511 900000 -99 -503 8134 7510 10517 516 2101 8400 -8012 6433 9434 -312 14891 3790 12842 3146 95 -26565 900000 -5475 900000 32 900000 5231 4637 -13802 114 900000 6471 3812 15740 -3599 3198 -4935 -10311 -762 14449 -4794 -9793 2743 17818 10946 11818 9250 5320 -12996 468 121 -7882 503 4585 1069 900000 7793 6895 4664 -9993 8647 3831 9488 9379 546 2089 -584 -13911 4608 14983 6450 3099 5674 10310 10043 7672 7912 2793 187 2274 6047 12037 3166 -622 -7257 10603 -3932 7118 -5770 10530 -16070 1392 8396 -13427 -9034 -3336 -16223 6989 10732 -559 19015 -5950 -5655 -3273 8845 -2902 2629 5323 -9747 11981 -1853 16944 -4534 6579 -1397 -9031 1065 -2723 1256 2956 -9898 8430 -12233 4295 1960 -3879 1091 -4518 7041 412 -1773 -4885 6674 990