File name: Pandora238s1_Granada_20221202_L2Fit_ffuh5c4d20221202p1-8.txt
File generation date: 20241022T131230.4Z
Data description: Level 2 spectral fitting results file
Data file version: ffuh5c4p1-8
Local principal investigator: 
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 238
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora238_OF_v0d20220614.txt
Instrument calibration file used: Pandora238s1_CF_v4d20221202.txt
Level 1 file used: Pandora238s1_Granada_20221202_L1_smca1c4d20221202p1-8.txt
Full location name: Andalusian Institute for Earth System Research (IISTA) - University of Granada
Short location name: Granada
Country of location: Spain
Location latitude [deg]: 37.1640
Location longitude [deg]: -3.6050
Location altitude [m]: 680
Local noon date: 20221202
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Full Cal on 1.8, based on clearance with ND and sens updated
First and last pixel inside fitting window: 370 592
Nominal wavelengths inside fitting window [nm]: 328.5090 328.6476 328.7863 328.9249 329.0636 329.2022 329.3408 329.4794 329.6179 329.7565 329.8951 330.0336 330.1721 330.3106 330.4491 330.5876 330.7261 330.8646 331.0030 331.1415 331.2799 331.4183 331.5567 331.6951 331.8335 331.9719 332.1102 332.2486 332.3869 332.5252 332.6635 332.8018 332.9401 333.0784 333.2166 333.3549 333.4931 333.6313 333.7695 333.9077 334.0459 334.1841 334.3222 334.4604 334.5985 334.7366 334.8748 335.0129 335.1509 335.2890 335.4271 335.5651 335.7032 335.8412 335.9792 336.1172 336.2552 336.3932 336.5311 336.6691 336.8070 336.9449 337.0829 337.2208 337.3587 337.4965 337.6344 337.7722 337.9101 338.0479 338.1857 338.3235 338.4613 338.5991 338.7369 338.8746 339.0124 339.1501 339.2878 339.4255 339.5632 339.7009 339.8386 339.9762 340.1139 340.2515 340.3891 340.5267 340.6643 340.8019 340.9395 341.0771 341.2146 341.3521 341.4897 341.6272 341.7647 341.9022 342.0396 342.1771 342.3145 342.4520 342.5894 342.7268 342.8642 343.0016 343.1390 343.2763 343.4137 343.5510 343.6884 343.8257 343.9630 344.1003 344.2375 344.3748 344.5121 344.6493 344.7865 344.9237 345.0609 345.1981 345.3353 345.4725 345.6096 345.7468 345.8839 346.0210 346.1581 346.2952 346.4323 346.5694 346.7064 346.8435 346.9805 347.1175 347.2545 347.3915 347.5285 347.6655 347.8024 347.9394 348.0763 348.2132 348.3501 348.4870 348.6239 348.7608 348.8976 349.0345 349.1713 349.3081 349.4449 349.5817 349.7185 349.8553 349.9920 350.1288 350.2655 350.4022 350.5389 350.6756 350.8123 350.9490 351.0856 351.2223 351.3589 351.4955 351.6322 351.7688 351.9053 352.0419 352.1785 352.3150 352.4515 352.5881 352.7246 352.8611 352.9976 353.1340 353.2705 353.4069 353.5434 353.6798 353.8162 353.9526 354.0890 354.2254 354.3617 354.4981 354.6344 354.7707 354.9070 355.0433 355.1796 355.3159 355.4521 355.5884 355.7246 355.8608 355.9970 356.1332 356.2694 356.4056 356.5417 356.6779 356.8140 356.9501 357.0862 357.2223 357.3584 357.4945 357.6306 357.7666 357.9026 358.0386 358.1747 358.3106 358.4466 358.5826 358.7186 358.8545 358.9904
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Formaldehyde effective temperature [K]
Column 28: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Nitrogen dioxide effective temperature [K]
Column 39: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Oxygen dimer slant column amount [moles squared per meter to the 5th], -9e99=fitting not successful
Column 45: Independent uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Oxygen dimer effective temperature [K]
Column 50: Independent uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective oxygen dimer fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for oxygen dimer [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Ozone effective temperature [K]
Column 61: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Fitted Ring spectrum, -9e99=no fitting done or fitting not successful
Column 67: Independent uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 68: Structured uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 69: Common uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 70: rms-based uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 71: Effective Ring fitting wavelength [nm], -9=fitting not done or not successful
Column 72: Diffuse correction applied before fitting at effective Ring fitting wavelength [%], 0=no diffuse correction applied, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 73: Lower limit used for wavelength scaling [nm]
Column 74: Upper limit used for wavelength scaling [nm]
Column 75: Order of smoothing polynomial
Column 76: Smoothing polynomial coefficient, order 0
Column 77: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 78: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 79: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 80: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 81: Smoothing polynomial coefficient, order 1
Column 82: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 83: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 84: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 85: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 86: Smoothing polynomial coefficient, order 2
Column 87: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 88: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 89: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 90: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 91: Smoothing polynomial coefficient, order 3
Column 92: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 93: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 94: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 95: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 96: Smoothing polynomial coefficient, order 4
Column 97: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 98: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 99: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 100: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 101: Mean value of measured data inside fitting window [same units as measurements]
Column 102: Offset polynomial coefficient, order 0
Column 103: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 104: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 105: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 106: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 107: Offset polynomial coefficient, order 1
Column 108: Independent uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 109: Structured uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 110: Common uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 111: rms-based uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 112: Wavelength change polynomial coefficient, order 0
Column 113: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 114: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 115: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 116: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 117: Wavelength change polynomial coefficient, order 1
Column 118: Independent uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 119: Structured uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 120: Common uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 121: rms-based uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 122: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 123: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 124: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 125: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 126: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 127: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 128: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 129: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 130: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 131: Wavelength effective temperature [°C], 999=no effective temperature given
Column 132: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 133: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 134: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 135: Number of bright count cycles
Column 136: Number of dark count cycles
Column 137: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 138: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 139: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 140: Integration time [ms]
Column 141: Temperature at electronics board [°C], 999=no temperature signal
Column 142: Spectrometer control temperature [°C], 999=no temperature signal
Column 143: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 144: Temperature in head sensor [°C], 999=no temperature signal
Column 145: Humidity in head sensor [%], -9=no humidity signal
Column 146: Pressure in head sensor [hPa], -9=no pressure signal
Columns 147-369: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 370-592: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------