File name: Pandora37s1_HamptonVA_20180819_L2Fit_fsus1c7d20170705p1-8.txt
File generation date: 20250819T090343.0Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c7p1-8
Local principal investigator: David Flittner
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 37
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora37_OF_v2d20170619.txt
Instrument calibration file used: Pandora37s1_CF_v7d20170705.txt
Level 1 file used: Pandora37s1_HamptonVA_20180819_L1_smca1c7d20170705p1-8.txt
Full location name: Langley Research Center
Short location name: HamptonVA
Country of location: USA
Location latitude [deg]: 37.1036
Location longitude [deg]: -76.3868
Location altitude [m]: 4
Local noon date: 20180819
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 265 410
Nominal wavelengths inside fitting window [nm]: 306.0716 306.2119 306.3521 306.4924 306.6327 306.7729 306.9132 307.0534 307.1936 307.3338 307.4740 307.6142 307.7544 307.8945 308.0347 308.1748 308.3149 308.4551 308.5952 308.7353 308.8753 309.0154 309.1555 309.2955 309.4356 309.5756 309.7156 309.8556 309.9956 310.1356 310.2755 310.4155 310.5554 310.6954 310.8353 310.9752 311.1151 311.2550 311.3949 311.5348 311.6746 311.8145 311.9543 312.0941 312.2339 312.3737 312.5135 312.6533 312.7931 312.9328 313.0726 313.2123 313.3520 313.4917 313.6314 313.7711 313.9108 314.0505 314.1901 314.3297 314.4694 314.6090 314.7486 314.8882 315.0278 315.1674 315.3069 315.4465 315.5860 315.7255 315.8651 316.0046 316.1440 316.2835 316.4230 316.5625 316.7019 316.8413 316.9808 317.1202 317.2596 317.3990 317.5383 317.6777 317.8171 317.9564 318.0957 318.2350 318.3744 318.5136 318.6529 318.7922 318.9315 319.0707 319.2099 319.3492 319.4884 319.6276 319.7668 319.9059 320.0451 320.1843 320.3234 320.4625 320.6017 320.7408 320.8799 321.0189 321.1580 321.2971 321.4361 321.5751 321.7142 321.8532 321.9922 322.1311 322.2701 322.4091 322.5480 322.6870 322.8259 322.9648 323.1037 323.2426 323.3815 323.5203 323.6592 323.7980 323.9368 324.0757 324.2145 324.3532 324.4920 324.6308 324.7695 324.9083 325.0470 325.1857 325.3244 325.4631 325.6018 325.7405 325.8791 326.0178 326.1564 326.2950
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 157-302: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 303-448: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20180819T103227.0Z 6805.439201 1729 1 32.00 2 89.52 74.37 154.77 314.90 0.00 1 0.00 1 7 262 3.505e-01 1.925e-01 4.287e-01 3.007e-01 1.430382e-04 1.182086e-04 3.649953e-06 3.874341e-07 1.504206e-04 231.31 -2.00 3.43 -2.00 318.27 0.00e+00 1.218644e-02 3.368472e-02 2.007389e-03 2.156572e-05 4.080262e-02 292.04 -2.00 20.00 -2.00 317.09 0.00e+00 5.474716e-02 5.969884e-02 6.283375e-04 3.560964e-05 7.478296e-02 292.04 -2.00 20.00 -2.00 319.24 0.00e+00 7.330733e-02 6.807070e-02 7.868187e-03 1.507697e-05 7.832677e-02 292.04 -2.00 20.00 -2.00 318.11 0.00e+00 7.407775e-02 3.736519e-01 1.158866e-02 6.791363e-03 4.544110e-01 -1340.87 15138.29 0.00 259.43 18426.16 314.37 0.00e+00 -3.159090e-03 1.053044e-02 4.287158e-04 2.007049e-05 1.167777e-02 292.04 -2.00 20.00 -2.00 311.54 0.00e+00 19.512 0.124 303.00 329.40 4 -7.9552e+00 1.1200e+00 2.4043e-01 2.1470e-03 1.3862e+00 1.4306e+00 1.2250e+00 6.9699e-02 7.3332e-04 1.4836e+00 -2.7505e-01 6.7295e-01 2.9216e-02 1.5824e-04 8.1099e-01 9.8982e-02 2.2986e-01 9.7353e-03 4.2465e-05 2.7214e-01 1.5129e-01 1.7214e-01 7.3333e-03 8.1529e-05 2.0381e-01 1.2919e-07 4.7645e+01 1.6617e+00 5.0795e-03 5.5676e-05 7.0530e-01 -8.1220e-03 8.8789e-03 9.1966e-05 1.9271e-06 1.0892e-02 8.4770e-03 0.0000e+00 5.3949e+00 3.9843e+00 3.4376e-02 6.8880e-04 4.4837e+00 12 15 8 11 8 0 82.16 22.12 71.80 0.00848 -0.05349 8 2 1 5 0 4000.000 26.73 19.99 22.12 -27234 2798 -16548 1151 -7839 1007 38951 7812 30214 -10374 25623 29281 35867 26664 5473 32957 -7717 18607 11614 34860 -6353 24848 2162 -8325 -29904 -11904 -24194 900000 -12082 -1191 8873 308 3379 42388 48327 47211 17703 22768 22375 12404 32373 7373 13509 -13064 -23104 30258 21453 22686 -8059 3721 7941 17581 -18875 24439 3612 28987 9991 18765 2439 -2527 -16960 11044 -8004 7585 -9325 25028 -6170 -6445 3489 -35739 -12385 -32016 4758 8668 36034 22347 -715 7115 2362 8903 -2287 26172 -97498 4738 10531 -11953 -78429 -1185 -7317 8759 -143334 33636 23816 28922 24427 11101 25325 -9374 25226 11743 17705 14286 29985 11624 -3757 25551 -7228 24032 -1542 -28426 14552 12108 15488 6135 24255 9397 24508 14511 22189 6812 18428 -15464 -21347 -7515 661 163 -6643 15295 -8775 -268563 36920 -6495 24448 -3259 427 -22182 10096 -27302 995 7389 9142 11222 493 26969 14818 15885 -25205 1925 -19635 1038 -7999 980 16638 9269 26529 -16248 20674 20151 17023 18982 5974 17988 -9340 15013 11851 22336 -7689 14152 1898 -7112 -34772 -11017 -29856 900000 -10322 -339 5896 307 3849 24142 21790 17926 17644 20532 20708 12952 9987 6824 10258 -16120 -35090 18669 17309 19381 -10327 4142 7401 11379 -24921 11388 3647 18010 10346 5344 2779 -2682 -19319 4574 -8910 7265 -11829 9071 -7507 -8176 3523 -56437 -11222 -40613 3942 8751 22388 19669 -870 7552 2812 8988 -2545 10841 -27764 4293 6815 -11140 -22334 -982 -8335 9296 -40817 31348 25279 23211 18971 10633 15079 -11406 15673 11856 18334 15903 24840 14445 -6127 25136 -10479 17109 -1669 -46140 10360 9309 12791 7512 24175 11775 18146 11158 12637 6789 6822 -21138 -34042 -10700 866 209 -9080 14373 -13494 -76478 23130 -9618 17405 -3898 474 -33479 4025 -36541 879 7154 10153 13421 730 25343 17301 16737
SU 20180819T103421.0Z 6805.440521 1731 1 32.01 2 89.15 74.65 155.03 315.72 0.00 1 0.00 1 7 263 4.817e-01 2.307e-01 4.473e-01 2.716e-01 -4.648052e-06 1.097633e-04 3.832839e-06 3.875869e-07 2.089307e-04 231.31 -2.00 3.43 -2.00 318.10 0.00e+00 -1.063438e-01 3.066719e-02 1.073340e-03 2.030983e-05 5.625247e-02 292.04 -2.00 20.00 -2.00 316.91 0.00e+00 1.456126e-01 5.538943e-02 1.627592e-03 3.336321e-05 1.023814e-01 292.04 -2.00 20.00 -2.00 319.09 0.00e+00 1.836549e-01 6.492567e-02 1.718897e-02 1.591268e-05 1.078569e-01 292.04 -2.00 20.00 -2.00 318.09 0.00e+00 -7.887366e-02 3.727014e-01 2.527277e-02 6.793417e-03 6.302710e-01 910.72 6388.27 0.00 100.33 10717.75 313.56 0.00e+00 -8.042966e-04 1.102906e-02 1.091075e-03 2.005481e-05 1.684360e-02 292.04 -2.00 20.00 -2.00 312.14 0.00e+00 18.798 0.111 303.00 329.40 4 -9.1825e+00 1.0890e+00 2.8042e-01 2.1451e-03 1.9140e+00 5.9720e-01 1.2502e+00 1.5244e-01 6.2893e-04 2.0604e+00 -5.3488e-01 6.7399e-01 5.2078e-02 1.2375e-04 1.1093e+00 2.7479e-01 2.2381e-01 1.7637e-02 3.6178e-05 3.7426e-01 4.7805e-01 1.7310e-01 7.0086e-03 8.4782e-05 2.9103e-01 1.0826e-07 7.9350e+01 2.3833e+00 1.2134e-01 7.6074e-04 2.0313e+00 2.0667e-02 9.2109e-03 1.0474e-04 2.1723e-06 1.5431e-02 -1.4643e-01 0.0000e+00 -2.3503e-01 3.7050e+00 5.4965e-02 7.3373e-04 6.3865e+00 12 15 12 11 8 0 94.86 22.12 89.95 -0.14643 0.01126 8 2 1 5 0 4000.000 26.73 19.99 22.12 900000 -11325 7776 1692 -17359 -12518 -607 11410 15653 15831 4540 -188672 13838 17037 -149619 12337 4344 22064 33326 17883 900000 -13516 -13580 -16417 -19092 -11121 -5926 -145996 -276250 -107618 -1681 4424 23797 23385 4878 20782 18303 -78348 -1817 -3489 -14246 -212876 -17643 -12843 -25606 -5090 -11770 -6880 -5534 -5331 -13241 -15908 -7342 -3803 7774 -40247 35924 -33580 32409 25479 16033 15592 22366 31469 28458 29272 24396 15641 2944 -135775 -17952 -10698 2443 18628 -6075 -23116 39404 52896 -25156 59679 51299 29958 -31923 15593 -3631 -39728 -28738 -38079 -11183 2584 14047 27078 31994 26256 16833 7083 8992 3826 -50962 23617 -32460 18056 12355 17791 18101 14090 11178 3465 -53657 -12918 -53630 476 18303 13382 37542 27997 20337 10437 -3602 -46446 -15947 -13893 -5454 -2644 -3256 -5645 -7626 -9613 -71 -4997 3488 -758 1128 -2454 -8331 -16637 -21546 -21750 -18488 -3231 4401 15102 21150 22677 20559 9555 900000 -15005 5497 1523 -8925 -15018 -676 7822 14755 10853 5446 -48505 13044 13140 -38465 10308 2047 25998 22847 8429 900000 -6081 -7855 -10552 -21269 -7863 -4063 -37533 -71019 -27667 -1440 5497 15295 26553 2090 20480 17253 -20142 -2257 -3887 -17396 -54727 -19655 -12656 -10971 -3053 -6052 -7518 -5098 -5482 -7427 -21935 -7035 -3911 5814 -13169 31904 -10203 40144 24414 17237 14211 17250 29419 31260 23260 17675 9870 3853 -34906 -10489 -10501 2569 19591 -2414 -7563 50651 44505 -112293 54396 33570 46910 -10445 13484 -3564 -18570 -24851 -20469 -9932 1872 15101 19619 29910 24545 11802 8112 8406 5991 -15484 19871 -11379 16036 14149 14553 18191 10505 9666 3482 -20692 -19624 -19302 834 10352 6536 33780 20873 25096 13416 -5464 -19105 -11070 -16072 -4627 -2175 -2595 -5805 -7842 -12604 -80 -7579 3945 -1053 1421 -2776 -8567 -17964 -20495 -25162 -24715 -3489 5091 16307 23924 18073 20613 8843