File name: Pandora37s1_HamptonVA_20231110_L2Fit_fsus1c5d20210730p1-8.txt
File generation date: 20250725T182713.8Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c5p1-8
Local principal investigator: Timothy Berkoff
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 37
Spectrometer number: 1
Processing software version used: BlickP v1.8.75
Instrument operation file used: Pandora37_OF_v6d20200313.txt
Instrument calibration file used: Pandora37s1_CF_v5d20210730.txt
Level 1 file used: Pandora37s1_HamptonVA_20231110_L1_smca1c5d20210730p1-8.txt
Full location name: Langley Research Center
Short location name: HamptonVA
Country of location: USA
Location latitude [deg]: 37.1036
Location longitude [deg]: -76.3868
Location altitude [m]: 4
Local noon date: 20231110
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 259 404
Nominal wavelengths inside fitting window [nm]: 306.1017 306.2421 306.3824 306.5227 306.6630 306.8034 306.9436 307.0839 307.2242 307.3645 307.5047 307.6449 307.7852 307.9254 308.0656 308.2058 308.3459 308.4861 308.6263 308.7664 308.9065 309.0467 309.1868 309.3269 309.4670 309.6070 309.7471 309.8871 310.0272 310.1672 310.3072 310.4472 310.5872 310.7272 310.8672 311.0071 311.1471 311.2870 311.4269 311.5668 311.7067 311.8466 311.9865 312.1263 312.2662 312.4060 312.5459 312.6857 312.8255 312.9653 313.1050 313.2448 313.3846 313.5243 313.6640 313.8038 313.9435 314.0832 314.2229 314.3625 314.5022 314.6419 314.7815 314.9211 315.0607 315.2003 315.3399 315.4795 315.6191 315.7586 315.8982 316.0377 316.1772 316.3167 316.4562 316.5957 316.7352 316.8747 317.0141 317.1536 317.2930 317.4324 317.5718 317.7112 317.8506 317.9899 318.1293 318.2686 318.4080 318.5473 318.6866 318.8259 318.9652 319.1045 319.2437 319.3830 319.5222 319.6614 319.8006 319.9398 320.0790 320.2182 320.3574 320.4965 320.6357 320.7748 320.9139 321.0530 321.1921 321.3312 321.4703 321.6093 321.7484 321.8874 322.0264 322.1654 322.3044 322.4434 322.5824 322.7214 322.8603 322.9993 323.1382 323.2771 323.4160 323.5549 323.6938 323.8326 323.9715 324.1103 324.2492 324.3880 324.5268 324.6656 324.8044 324.9432 325.0819 325.2207 325.3594 325.4981 325.6368 325.7755 325.9142 326.0529 326.1916 326.3302
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-451: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20231110T124421.7Z 8714.530806 449 1 48.33 2 79.15 121.44 50.92 140.13 0.00 1 0.00 1 0 145 1.388e-01 2.336e-02 2.272e-01 8.396e-03 -2.224820e-06 3.168516e-06 3.334065e-05 3.465945e-07 5.844348e-05 224.44 -2.00 3.43 -2.00 323.67 0.00e+00 1.527396e-02 1.366806e-03 2.095644e-02 4.330263e-05 1.628552e-02 284.06 -2.00 20.00 -2.00 324.37 0.00e+00 6.104600e-03 1.851154e-03 4.344538e-03 2.341940e-05 2.920198e-02 284.06 -2.00 20.00 -2.00 323.16 0.00e+00 3.313419e-02 4.183065e-03 6.204006e-03 1.057696e-05 3.061288e-02 284.06 -2.00 20.00 -2.00 323.50 0.00e+00 3.851548e-01 1.549258e-02 6.390975e-03 3.814599e-03 1.756317e-01 153.31 8.32 0.00 26.97 294.21 322.67 0.00e+00 -2.198961e-02 1.334569e-03 1.876414e-03 7.832697e-06 4.436677e-03 284.06 -2.00 20.00 -2.00 319.52 0.00e+00 5.114 0.002 303.00 329.40 4 4.0788e+00 4.0355e-02 7.1288e-02 1.7783e-03 5.3897e-01 -2.1058e-01 5.0228e-02 2.6272e-01 2.7266e-04 5.7925e-01 -2.0737e-01 3.0917e-02 3.7157e-02 9.0777e-05 3.1523e-01 3.6089e-01 1.0550e-02 2.3307e-01 5.4339e-05 1.0616e-01 -1.7525e-01 8.9775e-03 3.4753e-02 5.8563e-05 7.9621e-02 3.2217e-05 1.8727e-01 1.3111e-02 2.2497e-06 5.4846e-10 1.4420e-07 8.0186e-04 2.9572e-04 1.1248e-03 7.7098e-07 3.9504e-03 -2.6539e-03 0.0000e+00 6.8220e-01 4.2666e-01 1.1274e+00 4.3999e-04 5.7411e+00 12 9 8 11 40 0 98.08 21.18 0.03 -0.00265 0.00346 13 3 1 5 0 3717.340 25.17 19.98 21.18 21.51 29.9 1021.30 -13771 303 -6312 -25486 -1840 -39 2889 8205 6789 -20057 5328 -8531 -9212 -14780 -3762 5350 20468 21250 -5194 753 7062 -17380 -35618 -21600 -33794 -14906 -13017 -10271 -40522 1060 24292 31651 24592 27834 33610 5797 10156 9219 -1925 4935 -25879 2162 -4311 -4549 -1805 -1027 14223 5436 21497 9314 6670 -1630 7856 -2530 -4651 279 3104 12582 -4654 -8403 98048 12493 4301 -1096 9640 61 -711 1196 -5039 -2488 -17527 -8689 -4710 1154 -1606 -3308 878 630 3988 -1389 -2513 364 -4022 -3474 -10032 -2180 -2850 -3091 8125 1636 -637 1033 4025 -159 -2888 -2957 -4326 7031 6198 37 -1182 2207 171 1719 916 2299 828 -718 -536 1954 -2317 -1115 19 259 516 1917 1061 -2864 -3819 3876 2563 -1535 -554 1708 -1433 -1904 -3802 -1661 -438 1772 1564 1055 1157 -1707 452 1696 -2810 1058 -735 -358 956 571 384 -377 -30 -171 -4319 93 -155 -1309 -545 -14 1165 3279 64 -1073 2291 -206 -196 -387 -1909 43 163 495 -415 39 56 -396 -1505 -439 -1819 -527 -448 -159 -3077 19 225 1155 2075 2652 2888 867 1227 995 -244 491 -4561 215 -519 -639 -281 -179 2167 1074 3563 2025 1479 -378 1449 -556 -1172 74 881 3098 -1326 -2391 1000 3044 1441 -440 3547 25 -280 417 -1670 -725 -6216 -3092 -1940 521 -860 -1948 512 393 2554 -986 -1832 253 -2778 -2199 -6390 -1216 -1659 -2041 5466 1345 -606 1037 3859 -148 -2501 -2391 -3684 5832 5438 36 -1235 2383 207 2209 1230 3013 1053 -868 -616 2201 -2834 -1431 25 346 673 2408 1300 -3492 -4546 4103 2820 -1944 -764 2472 -2219 -3041 -6447 -2939 -806 3268 2949 2008 2140 -3104 775 2802 -4967 1924 -1465 -762 2160 1383 968 -986 -78 -449
SU 20231110T183555.3Z 8714.774946 2900 1 49.68 2 59.84 209.66 68.53 242.76 0.00 1 0.00 1 0 49 2.871e-02 9.362e-03 9.271e-03 3.822e-03 -8.882276e-06 1.407476e-06 1.174009e-07 3.461391e-07 1.264675e-05 224.42 -2.00 3.43 -2.00 321.71 0.00e+00 2.937751e-03 5.171179e-04 4.508343e-05 4.345633e-05 3.388470e-03 284.03 -2.00 20.00 -2.00 321.60 0.00e+00 2.947826e-03 7.001146e-04 1.895823e-05 2.330529e-05 6.041206e-03 284.03 -2.00 20.00 -2.00 321.57 0.00e+00 1.082154e-03 1.059325e-03 2.311381e-04 9.825586e-06 6.335242e-03 284.03 -2.00 20.00 -2.00 321.59 0.00e+00 2.347414e-01 5.234294e-03 6.854358e-04 3.820490e-03 3.555523e-02 208.78 5.14 0.00 0.49 61.24 317.86 0.00e+00 5.916808e-04 3.051937e-04 8.957618e-05 7.495959e-06 9.322867e-04 284.03 -2.00 20.00 -2.00 316.79 0.00e+00 1.982 0.000 303.00 329.40 4 6.2841e+00 1.2093e-02 1.9345e-02 1.7739e-03 1.1104e-01 4.6723e-02 1.7565e-02 3.7351e-03 2.3733e-04 1.1962e-01 5.3349e-03 9.9065e-03 1.6062e-03 8.0395e-05 6.5200e-02 -6.6615e-03 4.3572e-03 7.3178e-04 3.1976e-05 2.4246e-02 3.6350e-03 3.1318e-03 1.8764e-04 4.8324e-05 1.7023e-02 1.1816e-04 7.5284e-04 2.8144e-03 2.8755e-04 1.0910e-05 7.1335e-03 1.9248e-04 1.1237e-04 7.2495e-06 7.0092e-07 8.1788e-04 -7.8030e-03 0.0000e+00 2.7095e+00 3.4445e-01 2.9682e-03 4.0504e-04 2.2220e+00 12 8 8 10 0 0 99.98 21.07 0.36 -0.00780 -0.00633 31 6 1 5 0 1602.230 25.07 20.03 21.07 20.92 29.8 1022.55 -1027 2314 -4389 -8944 23963 -2509 6749 -624 480 -1646 5793 -3549 -2906 -2917 -2133 3174 -3721 2490 989 -1296 -3117 736 -5346 -333 -1821 -1910 -993 -2497 6090 2665 6988 2265 130 -7 2239 -1089 321 -1235 -419 2056 204 -318 398 1298 -682 778 -154 1337 569 -968 -563 -1800 467 -1404 -404 -1478 1131 1095 317 -1061 -2454 2179 -238 -1013 1703 -891 129 1369 -201 482 1292 -1801 -658 613 -366 -671 -483 5 795 -1091 -284 122 180 -827 -1275 -274 740 -2235 1121 382 -161 479 1202 532 -834 -713 -459 459 900 -372 -622 766 1704 -338 253 721 544 -244 164 110 -485 -678 124 8 798 685 -322 -1940 -784 1684 620 -628 -918 291 -648 -197 -1364 -573 -205 591 698 -212 79 481 337 330 -1447 154 -57 -324 747 301 447 -18 -230 -295 -128 307 -642 -1340 2778 -418 1167 -130 106 -381 1294 -888 -744 -755 -542 788 -1032 682 284 -374 -853 184 -1404 -88 -520 -591 -309 -737 1675 832 2413 963 64 -4 1187 -607 177 -688 -232 1090 107 -164 204 695 -393 463 -97 844 367 -641 -369 -1170 298 -939 -286 -1125 884 846 229 -727 -1661 1505 -187 -862 1460 -776 108 1068 -145 318 812 -1217 -491 499 -326 -628 -465 5 846 -1225 -324 138 198 -856 -1230 -243 634 -2063 1094 408 -187 579 1422 602 -893 -730 -481 513 1046 -451 -784 986 2277 -476 358 987 707 -298 189 127 -582 -859 165 10 1072 902 -412 -2401 -930 1880 695 -748 -1156 377 -865 -265 -1893 -827 -307 898 1078 -332 122 719 494 474 -2142 235 -93 -556 1335 563 850 -35 -442 -560