File name: Pandora130s1_Lindenberg_20240319_L2Fit_fsus1c6d20220715p1-8.txt
File generation date: 20240328T111136.8Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c6p1-8
Local principal investigator: Lionel Doppler
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 130
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora130_OF_v3d20201102.txt
Instrument calibration file used: Pandora130s1_CF_v6d20220715.txt
Level 1 file used: Pandora130s1_Lindenberg_20240319_L1_smca1c6d20220715p1-8.txt
Full location name: DWD Observatory Lindenberg
Short location name: Lindenberg
Country of location: Germany
Location latitude [deg]: 52.2900
Location longitude [deg]: 14.1200
Location altitude [m]: 127
Local noon date: 20240319
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: "AnaLab+fld for 20220715 VP" session 5 from check dispersion
First and last pixel inside fitting window: 244 388
Nominal wavelengths inside fitting window [nm]: 306.1406 306.2814 306.4222 306.5629 306.7037 306.8445 306.9852 307.1259 307.2667 307.4074 307.5481 307.6888 307.8294 307.9701 308.1107 308.2514 308.3920 308.5326 308.6732 308.8138 308.9544 309.0950 309.2355 309.3761 309.5166 309.6572 309.7977 309.9382 310.0787 310.2192 310.3596 310.5001 310.6405 310.7810 310.9214 311.0618 311.2022 311.3426 311.4830 311.6234 311.7637 311.9041 312.0444 312.1847 312.3250 312.4653 312.6056 312.7459 312.8861 313.0264 313.1666 313.3069 313.4471 313.5873 313.7275 313.8677 314.0079 314.1480 314.2882 314.4283 314.5684 314.7086 314.8487 314.9888 315.1288 315.2689 315.4090 315.5490 315.6891 315.8291 315.9691 316.1091 316.2491 316.3891 316.5290 316.6690 316.8089 316.9489 317.0888 317.2287 317.3686 317.5085 317.6484 317.7882 317.9281 318.0679 318.2078 318.3476 318.4874 318.6272 318.7670 318.9067 319.0465 319.1863 319.3260 319.4657 319.6054 319.7452 319.8848 320.0245 320.1642 320.3039 320.4435 320.5831 320.7228 320.8624 321.0020 321.1416 321.2811 321.4207 321.5603 321.6998 321.8393 321.9789 322.1184 322.2579 322.3974 322.5368 322.6763 322.8158 322.9552 323.0946 323.2340 323.3735 323.5128 323.6522 323.7916 323.9310 324.0703 324.2096 324.3490 324.4883 324.6276 324.7669 324.9062 325.0454 325.1847 325.3239 325.4632 325.6024 325.7416 325.8808 326.0200 326.1592 326.2983
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240319T055615.3Z 8844.247399 182 1 49.02 2 83.42 99.16 100.85 346.02 0.00 1 0.00 1 0 209 1.787e-01 3.877e-02 1.743e-01 8.705e-03 8.831167e-05 3.990224e-06 5.075817e-06 6.718037e-07 7.661629e-05 225.44 -2.00 3.85 -2.00 324.55 0.00e+00 2.480747e-02 1.788475e-03 3.025920e-03 2.966447e-05 2.068668e-02 268.98 -2.00 20.00 -2.00 325.35 0.00e+00 2.500301e-02 2.661444e-03 9.149748e-04 4.624515e-05 3.818870e-02 268.98 -2.00 20.00 -2.00 323.98 0.00e+00 -1.085442e-02 5.748400e-03 2.332459e-03 2.173089e-05 3.836765e-02 268.98 -2.00 20.00 -2.00 324.40 0.00e+00 8.754008e-01 2.360093e-02 1.215189e-02 2.708958e-03 2.312577e-01 197.23 5.70 0.00 0.46 387.86 323.06 0.00e+00 -2.755319e-02 2.022488e-03 7.924207e-04 1.675457e-04 5.590220e-03 268.98 -2.00 20.00 -2.00 322.14 0.00e+00 7.940 0.011 303.00 329.40 4 7.2223e-01 4.9281e-02 7.7025e-02 3.4567e-03 7.0128e-01 2.0223e+00 7.7366e-02 2.8268e-02 5.6494e-04 7.5456e-01 -1.7286e+00 4.3776e-02 2.6574e-02 2.0437e-04 4.1117e-01 4.0417e-01 2.1727e-02 3.9882e-02 1.2825e-04 1.3897e-01 5.4245e-02 1.2392e-02 7.2960e-03 1.0072e-04 1.0443e-01 3.4812e-05 6.7427e-01 3.2103e-02 1.4423e-08 1.1221e-10 1.9788e-07 -1.8676e-03 4.3148e-04 3.1477e-04 1.8298e-06 5.7394e-03 9.3768e-03 -1.9900e-04 2.1260e+00 3.5226e-01 1.4471e-01 7.7414e-04 5.4097e+00 12 8 8 10 0 0 28.46 15.90 0.50 0.00938 -0.00487 44 10 4 8 0 1114.060 14.99 15.90 4.13 21.48 21.48 29.1 1011.65 4134 20574 36532 1451 37751 19746 35925 30680 39960 38389 21115 12788 15752 -19910 -15288 16666 10848 25657 19700 19638 -25917 -10962 -15302 -11183 5329 19155 -1362 -13365 -29534 -465 20851 38700 44663 58536 38731 28692 13891 15779 1334 -1502 5398 -4538 8505 20220 15435 29179 35647 36598 34318 20825 21754 4759 -1517 -2743 -23462 -27491 1643 -20457 4977 -12212 -4353 9450 17416 19096 33095 7109 -13031 -22817 -21554 -19797 -33558 -10512 -7823 7954 10513 18885 8210 8440 10872 9060 1233 8753 -5937 -28411 -10886 -13536 -1966 -4664 2547 6519 8261 14915 8222 11608 -5235 -9407 -11063 3825 -1606 -352 6890 5640 11227 3884 2172 3786 -4801 -2432 -5652 -3795 -4073 1627 -3995 6280 2606 -992 -10119 -1124 -8257 2097 -1224 -919 566 -828 2251 -3134 -2190 -1765 1213 615 1581 3238 997 1124 1865 -1699 -769 -2885 1520 2768 1558 1982 -34 -1045 -2033 235 878 301 251 311 1953 1376 2374 1472 1127 1760 1130 634 -3593 -2401 1075 1778 3043 2598 1228 -4947 -718 -1365 -1128 266 158 -112 -1289 -5179 -34 1042 1774 3270 1319 3737 2852 1589 870 120 -121 256 -486 627 1115 1766 2315 2699 3299 3594 3322 2025 494 -118 -170 -4584 -6873 186 -4656 418 -2368 -819 1631 3158 3537 3120 1358 -3203 -5133 -3365 -2745 -8916 -2135 -2230 2040 3104 4752 2496 2562 3226 2710 412 2203 -1862 -12033 -3304 -4680 -684 -2315 1420 4182 5655 10025 5572 6208 -3066 -5320 -6677 1946 -962 -230 4584 4289 9282 3988 2362 3907 -5221 -2403 -5793 -3983 -4558 1765 -4682 6085 2499 -957 -10639 -1013 -8177 1877 -1352 -1224 819 -1361 3847 -5815 -4325 -3685 2525 1293 3263 6240 1912 1983 3092 -2986 -1465 -6059 3433 6602 4231 5633 -105 -3487 -6776
SS 20240319T060540.1Z 8844.253936 185 1 49.02 2 82.00 101.05 101.18 348.06 0.00 1 0.00 1 0 177 2.323e-01 1.593e-02 1.418e-01 3.518e-03 2.995614e-05 1.631005e-06 2.267478e-06 6.717458e-07 9.957789e-05 225.44 -2.00 3.85 -2.00 324.37 0.00e+00 1.339248e-02 7.422426e-04 9.145200e-04 2.913350e-05 2.689394e-02 268.98 -2.00 20.00 -2.00 325.20 0.00e+00 1.181548e-02 1.020594e-03 5.813096e-04 4.642331e-05 4.963162e-02 268.98 -2.00 20.00 -2.00 323.78 0.00e+00 -1.569010e-03 2.261583e-03 1.115702e-03 2.141865e-05 4.987171e-02 268.98 -2.00 20.00 -2.00 324.20 0.00e+00 9.471384e-01 9.314205e-03 6.072314e-03 2.711032e-03 3.000122e-01 207.55 2.20 0.00 0.51 504.05 323.11 0.00e+00 -2.180726e-02 1.448084e-03 3.937386e-03 1.649815e-04 7.262965e-03 268.98 -2.00 20.00 -2.00 322.37 0.00e+00 6.727 0.007 303.00 329.40 4 1.0716e+00 1.8393e-02 6.5766e-02 3.4551e-03 9.1056e-01 6.8321e-01 3.6989e-02 4.0047e-02 5.4361e-04 9.8075e-01 -1.3191e+00 2.0349e-02 1.0575e-02 2.1650e-04 5.3404e-01 9.7302e-01 1.1456e-02 1.9247e-02 1.7128e-04 1.8051e-01 -2.7322e-01 7.6705e-03 6.3164e-03 1.5162e-04 1.3574e-01 1.4781e-04 6.9121e-02 3.7850e-03 4.1938e-08 2.7166e-10 2.5723e-07 -8.4314e-04 1.5659e-04 8.2162e-05 1.8314e-06 7.4558e-03 9.3269e-03 -2.0446e-04 7.2331e-01 1.5592e-01 8.4819e-02 9.2708e-04 8.0823e+00 12 8 8 10 0 0 -28.35 15.86 0.30 0.00933 0.00289 105 24 4 8 0 466.760 15.00 15.86 4.33 21.38 21.48 29.5 1011.68 63621 49003 93372 8277 86989 30613 77736 48230 77479 57594 38821 11903 43208 -30114 -19333 10622 -1443 6772 -7 1666 -54370 -28263 -24237 -18950 3675 22303 -5348 -23137 -51035 -11420 12545 30413 33225 61427 21800 21387 -1663 11557 -10094 -4210 -1915 -1227 2362 29819 5271 29721 22465 33767 23764 14667 13144 11548 1060 10076 -20253 -19196 594 -11379 8023 -4765 -622 12250 -12192 14529 22695 5919 -10141 -11924 -11742 -4451 -21187 -5190 -4907 3159 6698 6724 3433 1421 4358 1732 1115 3936 -3630 -13517 -2546 -4795 1078 -2845 331 -214 1316 2626 1738 2485 -2112 -4032 -3059 829 451 -1416 2061 348 2897 349 1052 660 -1220 -116 -996 -879 -804 317 -1090 1634 1208 158 -2604 -83 -2324 1422 -116 306 193 -57 408 -793 -1142 -443 8 655 398 730 -351 169 815 151 -316 -692 60 920 -83 617 -274 -232 -272 1041 1360 311 519 290 1292 801 1651 868 1239 1199 555 537 -1948 -977 367 -75 345 0 59 -3804 -1079 -932 -809 109 412 -198 -1044 -3910 -495 460 1096 1489 1433 1254 1069 -107 487 -608 -222 -103 -72 152 1364 450 1917 1871 2546 2231 1546 1250 937 90 745 -2742 -2739 79 -1687 1006 -772 -99 1945 -3002 2711 4083 1104 -2016 -2095 -2052 -736 -4564 -1135 -1323 923 2146 2303 1261 554 1684 698 443 1464 -1418 -5456 -922 -1935 476 -1464 195 -147 1006 2058 1306 1658 -1303 -2402 -1888 525 302 -1048 1645 326 2831 388 1220 770 -1411 -128 -1107 -1013 -969 388 -1332 1834 1292 166 -2745 -89 -2533 1555 -139 429 289 -94 722 -1425 -2211 -899 16 1352 819 1435 -647 305 1395 267 -616 -1420 136 2171 -222 1692 -814 -686 -830