File name: Pandora186s1_MadisonCT_20230928_L2Fit_fout2c2d20210922p1-8.txt
File generation date: 20230930T074254.4Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c2p1-8
Local principal investigator: Lukas Valin
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 186
Spectrometer number: 1
Processing software version used: BlickP v1.8.49
Instrument operation file used: Pandora186_OF_v4d20210803.txt
Instrument calibration file used: Pandora186s1_CF_v2d20210922.txt
Level 1 file used: Pandora186s1_MadisonCT_20230928_L1_smca1c2d20210922p1-8.txt
Full location name: Madison - Hammonasset State Park CTDEEP (USEPA AQS ID 09-009-9002)
Short location name: MadisonCT
Country of location: USA
Location latitude [deg]: 41.2568
Location longitude [deg]: -72.5533
Location altitude [m]: 3
Local noon date: 20230928
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 197 339
Nominal wavelengths inside fitting window [nm]: 305.0092 305.1504 305.2917 305.4329 305.5741 305.7153 305.8565 305.9977 306.1389 306.2800 306.4212 306.5623 306.7034 306.8445 306.9856 307.1267 307.2678 307.4089 307.5499 307.6909 307.8320 307.9730 308.1140 308.2550 308.3960 308.5369 308.6779 308.8189 308.9598 309.1007 309.2416 309.3825 309.5234 309.6643 309.8052 309.9460 310.0869 310.2277 310.3685 310.5093 310.6501 310.7909 310.9317 311.0724 311.2132 311.3539 311.4946 311.6354 311.7761 311.9167 312.0574 312.1981 312.3387 312.4794 312.6200 312.7606 312.9012 313.0418 313.1824 313.3230 313.4636 313.6041 313.7447 313.8852 314.0257 314.1662 314.3067 314.4472 314.5876 314.7281 314.8685 315.0090 315.1494 315.2898 315.4302 315.5706 315.7109 315.8513 315.9917 316.1320 316.2723 316.4126 316.5529 316.6932 316.8335 316.9738 317.1140 317.2543 317.3945 317.5347 317.6749 317.8151 317.9553 318.0955 318.2356 318.3758 318.5159 318.6560 318.7961 318.9362 319.0763 319.2164 319.3565 319.4965 319.6366 319.7766 319.9166 320.0566 320.1966 320.3366 320.4765 320.6165 320.7565 320.8964 321.0363 321.1762 321.3161 321.4560 321.5959 321.7357 321.8756 322.0154 322.1552 322.2950 322.4348 322.5746 322.7144 322.8542 322.9939 323.1337 323.2734 323.4131 323.5528 323.6925 323.8322 323.9719 324.1115 324.2512 324.3908 324.5304 324.6700 324.8096 324.9492
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20230928T211240.7Z 8671.883805 5 1 50.66 2 75.12 253.41 105.08 81.46 0.00 1 0.00 1 0 25 4.939e-02 4.543e-03 3.191e-02 1.650e-03 4.346086e-01 8.609321e-04 4.991841e-03 -6.000000e+00 2.918012e-02 227.76 -2.00 3.52 -2.00 320.12 0.00e+00 1.508245e-03 2.972127e-04 3.097663e-04 -6.000000e+00 1.310012e-03 286.09 -2.00 20.00 -2.00 319.40 0.00e+00 3.817 0.001 302.00 328.00 3 2.2330e+00 2.5742e-03 4.4238e-02 -6.0000e+00 7.2344e-02 2.3701e-02 3.1378e-03 2.2785e-02 -6.0000e+00 7.8415e-02 -6.5358e-03 2.5781e-03 1.1423e-02 -6.0000e+00 4.6858e-02 -6.0024e-03 1.3149e-03 3.6842e-03 -6.0000e+00 1.9703e-02 7.7130e-04 -1.5641e-04 5.2548e-05 4.2228e-05 -6.0000e+00 1.4654e-03 2.6786e-03 1.1389e-04 10 0 0 10 0 0 99.89 23.88 0.37 0.00268 0.00150 179 33 1 5 0 282.940 26.32 14.97 23.88 23.93 24.6 1020.13 -8559 -22529 -4561 -20181 -21563 -4136 -7403 -18491 1042 -11770 -14634 -10659 -16159 -10726 -10143 -10258 -11173 2965 -6480 833 -4094 2198 -1265 -54 -2248 -4162 -3357 -3856 402 -4539 289 -4139 373 -2288 -4296 -3288 -940 -1524 -814 -1195 -353 -717 275 -502 313 -980 105 -191 237 1323 257 1195 970 1558 -450 651 985 678 451 791 714 2209 1796 2903 1020 -113 1145 -126 768 768 550 91 145 -88 353 -422 -67 -770 -483 -795 -1136 -1259 -1712 -1649 -1013 -523 -330 349 515 440 466 611 -180 446 489 457 659 712 228 -341 -192 -506 -583 -392 -405 -975 -813 -419 -233 300 423 89 182 -58 208 229 311 324 89 -245 -498 51 -6 166 144 379 -50 807 616 232 176 -230 -347 -116 -55 -207 -44 127 69 -118 127 -26 -274 -107 -381 -70 -360 -364 -56 -107 -333 17 -244 -327 -243 -450 -342 -352 -416 -508 127 -326 41 -220 112 -69 -3 -141 -281 -230 -285 28 -329 22 -370 36 -219 -457 -341 -102 -192 -111 -196 -65 -143 57 -107 67 -216 23 -42 53 301 63 319 281 482 -149 222 344 239 157 272 252 826 745 1299 483 -53 503 -56 360 405 321 57 90 -53 197 -215 -35 -386 -256 -438 -719 -897 -1335 -1367 -891 -490 -326 354 523 434 431 522 -146 355 417 436 711 861 297 -449 -239 -582 -629 -425 -469 -1206 -1058 -575 -343 437 661 145 291 -89 324 338 458 496 132 -386 -797 80 -10 265 220 553 -71 1156 957 396 295 -407 -637 -224 -113 -445 -97 286 156 -258 266 -52 -541