File name: Pandora251s1_Nainital-ARIES_20240719_L2Fit_fout2c2d20221223p1-8.txt
File generation date: 20240722T051448.7Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c2p1-8
Local principal investigator: Manish Naja
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 251
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora251_OF_v2d20221122.txt
Instrument calibration file used: Pandora251s1_CF_v2d20221223.txt
Level 1 file used: Pandora251s1_Nainital-ARIES_20240719_L1_smca1c2d20221223p1-8.txt
Full location name: Aryabhatta Research Institute of Observational Sciences (ARIES)
Short location name: Nainital-ARIES
Country of location: India
Location latitude [deg]: 29.3588
Location longitude [deg]: 79.4583
Location altitude [m]: 1978
Local noon date: 20240719
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: OoB session based on session 1
First and last pixel inside fitting window: 196 338
Nominal wavelengths inside fitting window [nm]: 305.0600 305.2012 305.3423 305.4835 305.6246 305.7657 305.9068 306.0479 306.1890 306.3301 306.4711 306.6122 306.7532 306.8943 307.0353 307.1763 307.3173 307.4583 307.5992 307.7402 307.8811 308.0221 308.1630 308.3039 308.4448 308.5857 308.7266 308.8675 309.0083 309.1492 309.2900 309.4309 309.5717 309.7125 309.8533 309.9941 310.1348 310.2756 310.4163 310.5571 310.6978 310.8385 310.9792 311.1199 311.2606 311.4013 311.5419 311.6826 311.8232 311.9638 312.1044 312.2450 312.3856 312.5262 312.6668 312.8073 312.9479 313.0884 313.2289 313.3694 313.5099 313.6504 313.7909 313.9314 314.0718 314.2123 314.3527 314.4931 314.6335 314.7739 314.9143 315.0547 315.1951 315.3354 315.4757 315.6161 315.7564 315.8967 316.0370 316.1773 316.3175 316.4578 316.5980 316.7383 316.8785 317.0187 317.1589 317.2991 317.4393 317.5795 317.7196 317.8598 317.9999 318.1400 318.2801 318.4202 318.5603 318.7004 318.8404 318.9805 319.1205 319.2606 319.4006 319.5406 319.6806 319.8206 319.9605 320.1005 320.2404 320.3804 320.5203 320.6602 320.8001 320.9400 321.0799 321.2198 321.3596 321.4995 321.6393 321.7791 321.9189 322.0587 322.1985 322.3383 322.4780 322.6178 322.7575 322.8972 323.0370 323.1767 323.3164 323.4560 323.5957 323.7354 323.8750 324.0146 324.1543 324.2939 324.4335 324.5730 324.7126 324.8522 324.9917
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240719T003738.8Z 8966.026143 148 1 46.73 2 82.23 70.48 129.65 255.87 0.00 1 0.00 1 0 17 2.470e-01 3.347e-02 5.906e-02 7.377e-03 7.127541e-01 3.835179e-03 8.091335e-03 -6.000000e+00 1.415679e-01 228.62 -2.00 3.21 -2.00 320.91 0.00e+00 3.581649e-03 1.393829e-03 5.280753e-03 -6.000000e+00 6.297078e-03 283.92 -2.00 20.00 -2.00 320.25 0.00e+00 6.904 0.004 302.00 328.00 3 3.3931e+00 1.1949e-02 6.8803e-02 -6.0000e+00 3.5218e-01 8.2447e-01 1.4311e-02 4.5857e-02 -6.0000e+00 3.8276e-01 -1.1714e+00 9.4028e-03 1.9487e-02 -6.0000e+00 2.2808e-01 5.0696e-01 4.7105e-03 4.4968e-03 -6.0000e+00 9.5774e-02 3.2228e-05 -1.5854e-03 1.9661e-04 1.1280e-04 -6.0000e+00 6.7945e-03 -5.1065e-03 -1.9708e-05 12 9 9 12 1 1 94.74 27.65 -0.61 -0.00511 -0.01702 13 2 1 5 0 3337.170 35.75 20.00 27.65 25.40 8.7 951.77 -12648 -29613 -27703 -33014 -44968 -25965 -83329 -86630 -13182 -70323 -61369 -75057 -17209 -44390 11066 -14716 56038 12696 29532 49802 20094 -3581 -5393 1279 -3266 32202 11738 -35020 -13222 -39489 82448 29974 38845 14138 3854 -21148 -46625 34331 17773 9580 8144 40135 46060 42816 32677 31351 53197 20372 25387 10154 58575 24179 25686 12536 26492 11767 21158 12757 22457 3175 6273 14543 10567 10721 21785 5045 10708 8735 4410 2276 9927 9749 20902 890 -4363 -5176 -8645 -3157 -5335 -5180 -4657 1424 -3350 -3097 -1482 -6832 311 36 91 -2666 -1567 -1811 -75 -3955 -6628 -6569 -5784 2847 -4676 -4513 -3800 -2742 -4749 -1285 41 -1834 -2361 -1847 971 1086 -1790 1235 1471 -1080 -1023 571 745 383 -336 2104 3458 3181 1499 1531 3827 2669 1431 935 1923 584 540 209 205 377 898 78 617 -211 -434 -845 -1005 -1171 -3250 -736 -2208 -2011 -2267 -2911 -1240 -6921 -7648 -578 -5473 -4254 -6283 -957 -3919 666 -1299 2602 947 1893 2830 1474 -312 -469 107 -289 1992 861 -3779 -1075 -4346 3084 2178 2878 1383 385 -2571 -7715 2865 2059 1392 1306 4851 5335 5082 4208 4060 5511 2960 3598 1760 6826 4348 4878 2895 5527 2895 4764 3038 4604 761 1480 3431 2919 3293 6222 1651 3266 2796 1615 969 4263 4313 8045 388 -1805 -1918 -3103 -1097 -2141 -2467 -2576 768 -2068 -2016 -1012 -5219 231 27 69 -1977 -1067 -1161 -46 -2643 -5162 -5967 -6071 3148 -5522 -5273 -4119 -2885 -4675 -1240 42 -2019 -2776 -2144 1213 1531 -2890 2045 2438 -1776 -1596 849 1125 610 -570 3595 5715 5059 2343 2302 5402 3681 1955 1372 3180 1017 1033 428 441 799 2026 185 1475 -514 -1043 -1926 -2141 -2522 -6944