File name: Pandora55s1_QueensNY_20240125_L2Fit_fout2c17d20220526p1-8.txt
File generation date: 20240126T051153.1Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c17p1-8
Local principal investigator: Lukas Valin
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 55
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora55_OF_v5d20190723.txt
Instrument calibration file used: Pandora55s1_CF_v17d20220526.txt
Level 1 file used: Pandora55s1_QueensNY_20240125_L1_smca1c17d20220526p1-8.txt
Full location name: Queens College NYSDEC (USEPA AQS ID 36-081-0124)
Short location name: QueensNY
Country of location: USA
Location latitude [deg]: 40.7361
Location longitude [deg]: -73.8215
Location altitude [m]: 25
Local noon date: 20240125
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 262 404
Nominal wavelengths inside fitting window [nm]: 305.1320 305.2720 305.4120 305.5520 305.6920 305.8320 305.9719 306.1119 306.2518 306.3917 306.5317 306.6716 306.8115 306.9514 307.0912 307.2311 307.3709 307.5108 307.6506 307.7905 307.9303 308.0701 308.2099 308.3496 308.4894 308.6292 308.7689 308.9087 309.0484 309.1881 309.3278 309.4675 309.6072 309.7469 309.8866 310.0262 310.1659 310.3055 310.4451 310.5847 310.7243 310.8639 311.0035 311.1431 311.2827 311.4222 311.5618 311.7013 311.8408 311.9803 312.1198 312.2593 312.3988 312.5383 312.6777 312.8172 312.9566 313.0960 313.2355 313.3749 313.5143 313.6536 313.7930 313.9324 314.0717 314.2111 314.3504 314.4897 314.6291 314.7684 314.9077 315.0469 315.1862 315.3255 315.4647 315.6040 315.7432 315.8824 316.0216 316.1608 316.3000 316.4392 316.5783 316.7175 316.8566 316.9958 317.1349 317.2740 317.4131 317.5522 317.6913 317.8303 317.9694 318.1085 318.2475 318.3865 318.5255 318.6645 318.8035 318.9425 319.0815 319.2205 319.3594 319.4984 319.6373 319.7762 319.9151 320.0540 320.1929 320.3318 320.4707 320.6095 320.7484 320.8872 321.0260 321.1649 321.3037 321.4425 321.5812 321.7200 321.8588 321.9975 322.1363 322.2750 322.4137 322.5524 322.6911 322.8298 322.9685 323.1072 323.2458 323.3845 323.5231 323.6617 323.8003 323.9389 324.0775 324.2161 324.3547 324.4932 324.6318 324.7703 324.9089
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [�C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [�C], 999=no temperature signal
Column 95: Spectrometer control temperature [�C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [�C], 999=no temperature signal
Column 97: Temperature in head sensor [�C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240125T185552.5Z 8790.788802 491 1 51.57 2 64.77 208.42 112.47 24.96 0.00 1 0.00 1 0 25 2.974e-01 6.633e-02 1.262e-02 2.737e-03 2.933829e-01 1.398389e-03 4.025249e-03 -6.000000e+00 1.741513e-01 224.14 -2.00 3.51 -2.00 317.56 0.00e+00 1.960115e-02 2.154070e-04 1.570806e-03 -6.000000e+00 7.594260e-03 275.30 -2.00 20.00 -2.00 317.01 0.00e+00 2.331 0.000 302.00 328.00 3 4.9418e+00 3.6635e-03 3.1179e-02 -6.0000e+00 4.2978e-01 1.7167e-01 4.1016e-03 3.2907e-02 -6.0000e+00 4.6762e-01 -2.5092e-01 2.4516e-03 1.0344e-02 -6.0000e+00 2.7815e-01 1.4329e-01 1.2322e-03 1.6026e-02 -6.0000e+00 1.1770e-01 2.3959e-04 -8.5078e-04 8.3155e-05 1.4411e-04 -6.0000e+00 8.9220e-03 1.5621e-02 0.0000e+00 12 9 8 11 4 0 99.85 22.73 0.52 0.01562 0.00923 15 3 1 5 0 3437.730 26.32 20.01 22.73 21.50 36.3 1072.48 72203 181603 58654 90730 106266 58918 114130 42662 29540 7438 12736 10596 25273 64615 46635 37329 -93091 66055 58875 61533 41436 43897 15176 16825 4983 24138 2270 3536 11166 18459 27871 20463 23754 21284 36838 15096 10409 12143 8884 -2258 917 -5647 -2045 1762 9892 5967 13010 13088 13670 9493 8598 4286 10418 6628 1440 57 -4308 -3804 -5317 -2989 2589 1667 -3799 3903 213 3062 47 1482 569 -1541 -2320 -1852 -4430 -1837 -4530 -2757 -1012 -2794 -2172 -2697 869 -1847 -1794 -4354 -2594 -4390 -3448 -2816 -1225 -1311 -1515 -845 -1684 -1589 -2206 -1253 62 499 1212 1567 1077 887 2462 1379 -294 -222 -176 522 2520 1882 308 1232 169 -100 -321 1039 2200 1651 918 432 -11240 2436 3195 1525 1395 1320 2282 1366 1485 2759 2579 2090 1728 1327 -104 194 -360 -789 -1878 -1419 -1689 -1374 -2053 6895 6643 6629 6957 6266 4975 5561 4036 3087 920 1511 1448 3672 7951 7827 7468 -58672 11239 11053 11361 8988 8865 3780 3967 1268 5100 573 877 2642 4384 6739 5821 6909 6256 9021 4441 3389 4333 3605 -1078 448 -3016 -1099 944 5114 3227 6688 6707 6956 5079 4812 2593 6223 4154 940 37 -2899 -2525 -3555 -2006 1748 1218 -3092 3125 174 2352 35 1092 445 -1316 -2099 -1699 -4106 -1615 -3849 -2152 -736 -2043 -1668 -2279 779 -1803 -1827 -4672 -2867 -5133 -4148 -3439 -1481 -1550 -1714 -894 -1702 -1587 -2318 -1409 75 643 1614 2079 1376 1075 2862 1634 -367 -289 -235 721 3571 2793 478 1919 261 -149 -455 1411 2953 2281 1329 650 -18499 3657 4695 2211 1964 1806 3021 1823 2053 3969 3855 3197 2690 2116 -172 331 -626 -1393 -3348 -2493 -2913 -2300 -3401