File name: Pandora138s1_Rome-SAP_20191219_L2Fit_fsus1c1d20190827p1-8.txt
File generation date: 20250203T162027.7Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Stefano Casadio
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 138
Spectrometer number: 1
Processing software version used: BlickP v1.8.70
Instrument operation file used: Pandora138_OF_v4d20190508.txt
Instrument calibration file used: Pandora138s1_CF_v1d20190827.txt
Level 1 file used: Pandora138s1_Rome-SAP_20191219_L1_smca1c1d20190827p1-8.txt
Full location name: Department of Physics, University of Rome La Sapienza
Short location name: Rome-SAP
Country of location: Italy
Location latitude [deg]: 41.9017
Location longitude [deg]: 12.5158
Location altitude [m]: 75
Local noon date: 20191219
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 217 362
Nominal wavelengths inside fitting window [nm]: 306.0599 306.2009 306.3418 306.4827 306.6236 306.7645 306.9054 307.0463 307.1872 307.3280 307.4689 307.6097 307.7505 307.8914 308.0322 308.1729 308.3137 308.4545 308.5952 308.7360 308.8767 309.0175 309.1582 309.2989 309.4396 309.5802 309.7209 309.8615 310.0022 310.1428 310.2834 310.4241 310.5647 310.7052 310.8458 310.9864 311.1269 311.2675 311.4080 311.5485 311.6890 311.8295 311.9700 312.1105 312.2509 312.3914 312.5318 312.6723 312.8127 312.9531 313.0935 313.2338 313.3742 313.5146 313.6549 313.7953 313.9356 314.0759 314.2162 314.3565 314.4968 314.6370 314.7773 314.9175 315.0577 315.1980 315.3382 315.4784 315.6186 315.7587 315.8989 316.0390 316.1792 316.3193 316.4594 316.5995 316.7396 316.8797 317.0198 317.1598 317.2999 317.4399 317.5799 317.7199 317.8599 317.9999 318.1399 318.2799 318.4198 318.5598 318.6997 318.8396 318.9795 319.1194 319.2593 319.3992 319.5391 319.6789 319.8187 319.9586 320.0984 320.2382 320.3780 320.5178 320.6575 320.7973 320.9370 321.0768 321.2165 321.3562 321.4959 321.6356 321.7753 321.9149 322.0546 322.1942 322.3338 322.4735 322.6131 322.7527 322.8922 323.0318 323.1714 323.3109 323.4505 323.5900 323.7295 323.8690 324.0085 324.1480 324.2874 324.4269 324.5663 324.7057 324.8452 324.9846 325.1240 325.2634 325.4027 325.5421 325.6814 325.8208 325.9601 326.0994 326.2387 326.3780
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-306: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 307-452: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20191219T143310.7Z 7292.606374 464 1 49.47 2 80.84 226.72 119.18 305.66 0.00 1 0.00 1 0 145 1.301e-01 1.002e-02 1.738e-01 4.571e-03 1.621981e-05 2.041075e-06 3.908911e-07 3.845219e-07 5.439293e-05 222.70 -2.00 3.53 -2.00 324.24 0.00e+00 4.798319e-03 9.836945e-04 2.661669e-04 6.236961e-06 1.507237e-02 275.71 -2.00 20.00 -2.00 325.13 0.00e+00 2.169751e-03 1.268479e-03 1.803812e-04 2.636151e-05 2.731377e-02 275.71 -2.00 20.00 -2.00 323.69 0.00e+00 9.659734e-03 2.784708e-03 6.791273e-04 1.794903e-05 2.826344e-02 275.71 -2.00 20.00 -2.00 324.11 0.00e+00 8.685214e-01 1.197264e-02 8.289779e-04 7.231728e-04 1.654840e-01 219.90 3.19 0.00 0.14 275.81 322.91 0.00e+00 -7.849298e-03 1.844721e-03 1.641671e-04 5.236988e-06 3.843696e-03 275.71 -2.00 20.00 -2.00 322.18 0.00e+00 5.964 0.004 303.00 329.40 4 2.4687e+00 2.3060e-02 5.8161e-02 1.9886e-03 5.0437e-01 3.6691e-01 4.8770e-02 9.1381e-03 3.0966e-04 5.4278e-01 -8.9880e-01 3.0918e-02 2.1321e-03 1.2487e-04 2.9713e-01 8.2910e-01 1.6373e-02 7.8772e-04 6.8810e-05 9.9988e-02 -2.7552e-01 8.0868e-03 4.0311e-04 7.9515e-05 7.3070e-02 6.1713e-05 4.9141e-02 4.5484e-03 1.5855e-09 3.3215e-11 1.3812e-07 3.4827e-04 1.7845e-04 4.3134e-06 7.4676e-07 3.8094e-03 1.7897e-02 0.0000e+00 -7.7298e-02 2.0433e-01 3.1763e-03 5.8645e-04 4.6807e+00 12 9 9 12 12 4 75.55 31.80 0.11 0.01790 0.02055 40 8 2 8 0 1236.540 14.99 31.80 19.74 20.87 21.48 23.1 936.13 -42804 -3314 -35752 -29657 12902 -25246 7734 6238 11386 6249 23470 50366 -10583 18446 1296 1209 2146 10996 -10441 2696 -4077 -59681 -37460 612 -14933 -21262 -30011 -3182 -10813 14245 3442 4815 33554 15141 22772 24509 31997 17304 9077 -1861 3125 5033 -1666 3527 7520 19295 16598 15328 17821 9711 14390 2840 -2928 3726 -2557 9845 1414 2608 2220 -1609 -2822 12609 -1561 3478 1237 -2032 -160 -10545 -9626 -10053 -8965 -1496 1261 282 4646 3162 -1389 1419 -2016 1324 -4093 1955 -1271 2080 -5905 -4073 -4464 -2273 467 -1496 1515 2140 238 -1173 -248 -2708 -1853 -182 -2412 -361 -221 1386 920 1374 841 340 757 -1494 277 -320 868 378 438 930 839 813 -1136 1254 -513 57 546 222 359 -227 -511 -548 -370 -334 -683 178 227 -400 299 345 -123 718 -336 -367 -573 566 -81 119 -93 -424 268 276 -1239 -33 -939 -614 56 -679 117 132 251 158 367 218 -303 165 18 18 39 167 -273 40 -45 -2211 -972 8 -418 -815 -1357 -69 -258 211 101 196 1068 764 1054 1080 1138 733 427 -103 167 280 -113 259 597 1460 1451 1462 1727 1062 1415 293 -303 360 -301 1170 213 405 341 -266 -506 2180 -365 835 310 -502 -35 -2296 -1860 -1900 -1819 -336 336 90 1632 1222 -586 615 -942 615 -2012 888 -564 839 -2498 -1719 -2077 -1212 284 -1068 1195 1787 197 -918 -172 -1781 -1248 -129 -1815 -284 -188 1285 963 1580 1018 416 902 -1748 314 -373 1045 475 555 1133 979 923 -1267 1333 -540 59 620 289 517 -357 -853 -958 -683 -650 -1364 358 459 -796 564 613 -209 1202 -598 -707 -1200 1263 -197 309 -253 -1203 767 805
SS 20191219T144603.0Z 7292.615313 467 1 48.01 2 82.61 229.10 121.05 308.49 0.00 1 0.00 1 0 177 1.570e-01 3.059e-02 1.943e-01 1.333e-02 7.200335e-05 5.850671e-06 6.531918e-07 3.845788e-07 6.560190e-05 222.70 -2.00 3.53 -2.00 324.46 0.00e+00 6.228207e-03 2.762034e-03 3.599181e-04 6.915547e-06 1.817425e-02 275.71 -2.00 20.00 -2.00 325.33 0.00e+00 1.404426e-02 3.884732e-03 2.147201e-04 2.642466e-05 3.294589e-02 275.71 -2.00 20.00 -2.00 323.92 0.00e+00 -9.582336e-03 8.471678e-03 1.284893e-03 1.746186e-05 3.408318e-02 275.71 -2.00 20.00 -2.00 324.35 0.00e+00 9.163210e-01 3.743802e-02 4.892432e-03 7.240682e-04 1.999767e-01 223.13 9.27 0.00 0.12 332.57 323.07 0.00e+00 -2.708821e-02 3.486667e-03 1.430741e-04 2.780356e-06 4.637990e-03 275.71 -2.00 20.00 -2.00 322.19 0.00e+00 7.201 0.007 303.00 329.40 4 2.6372e+00 7.3710e-02 6.9628e-02 1.9901e-03 6.0897e-01 1.5159e+00 1.3945e-01 2.1654e-02 3.2550e-04 6.5460e-01 -1.5725e+00 7.1266e-02 9.4893e-03 1.0055e-04 3.5856e-01 6.2727e-01 3.5367e-02 2.4844e-03 5.1662e-05 1.2066e-01 -3.1386e-02 1.8960e-02 8.0042e-04 5.1419e-05 8.8131e-02 1.2239e-05 2.8716e-01 2.7105e-02 1.2064e-09 1.5008e-11 1.6665e-07 -1.8970e-03 5.3444e-04 4.5403e-05 5.9263e-07 4.5982e-03 1.7788e-02 0.0000e+00 -2.0306e-02 5.3352e-01 7.6944e-03 4.7661e-04 4.8321e+00 12 9 9 12 4 4 70.43 31.61 0.19 0.01779 0.00331 12 2 2 8 0 4000.000 14.99 31.61 19.87 20.87 21.38 23.1 936.77 -24002 13546 -4879 8707 19912 695 3915 15511 -7240 19316 16615 20406 -20720 2844 -16678 4725 18522 27119 36183 14952 7781 -59899 -29036 -11219 -31905 -26011 -32654 -6880 -43347 -6194 -7661 8770 32590 34735 27070 36615 33439 -2526 -3246 -25906 2110 -15644 -5964 -11268 -4715 22930 20150 29021 20137 18204 24107 6442 -15056 10787 -17815 -99 8847 -9670 6245 -21721 -6789 21376 5975 13997 7009 5230 4538 -19908 -29149 -10553 -32545 -1713 -3623 -2470 16744 13427 -1003 3175 2040 8491 -3613 12054 5946 17989 -14679 -7556 -17131 -3031 9827 -1868 9599 15201 4878 1169 -1326 -1704 -5459 -8376 -7467 -2295 1903 367 1584 4359 4320 1744 665 -5632 -3940 -2502 46 -2788 796 1092 2912 -1359 -5560 1608 730 -3252 4092 -1536 -447 1279 -3092 -810 -371 1781 -2194 -10 1903 113 2202 231 -318 1828 494 -2469 -654 2858 305 1418 -1172 262 154 -1229 -1336 1649 -306 290 2332 36 184 467 -624 454 369 258 -1568 363 -619 639 314 635 5348 533 796 -7129 -923 -1616 -2284 -1924 -2985 -782 -3208 -610 -346 490 1393 2008 2084 1546 884 -207 -207 -2736 72 -1244 -405 -1188 -534 1409 1768 2380 2368 2331 2299 701 -1994 528 -2337 -11 960 -1667 712 -4511 -1198 2624 1304 3042 1737 1228 900 -4762 -6464 -1455 -7287 -273 -817 -697 4348 4148 -394 1227 822 3147 -1560 4027 1995 4471 -5605 -2668 -7706 -1377 4619 -1201 6288 10111 3549 806 -818 -934 -3194 -5531 -5138 -1587 1378 305 1503 4517 4740 1966 731 -6234 -4158 -2669 51 -3344 939 1240 3071 -1446 -5970 1544 689 -3139 4022 -1881 -618 1929 -5214 -1422 -690 3465 -4577 -22 3877 229 4113 409 -528 2906 845 -4782 -1383 6388 769 3859 -3460 799 478 -3913