File name: Pandora235s1_Seoul-KU_20240919_L2Fit_fsus1c8d20240408p1-8.txt
File generation date: 20250225T143037.7Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c8p1-8
Local principal investigator: ----
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 235
Spectrometer number: 1
Processing software version used: BlickP v1.8.74
Instrument operation file used: Pandora235_OF_v4d20230606.txt
Instrument calibration file used: Pandora235s1_CF_v8d20240408.txt
Level 1 file used: Pandora235s1_Seoul-KU_20240919_L1_smca1c8d20240408p1-8.txt
Full location name: Korea University, Seoul Campus
Short location name: Seoul-KU
Country of location: Korea, Republic of
Location latitude [deg]: 37.5855
Location longitude [deg]: 127.0257
Location altitude [m]: 90
Local noon date: 20240919
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 207 351
Nominal wavelengths inside fitting window [nm]: 306.1304 306.2711 306.4118 306.5525 306.6931 306.8338 306.9744 307.1150 307.2556 307.3962 307.5368 307.6774 307.8180 307.9585 308.0991 308.2396 308.3801 308.5207 308.6612 308.8017 308.9422 309.0826 309.2231 309.3635 309.5040 309.6444 309.7848 309.9253 310.0657 310.2060 310.3464 310.4868 310.6272 310.7675 310.9078 311.0482 311.1885 311.3288 311.4691 311.6094 311.7496 311.8899 312.0301 312.1704 312.3106 312.4508 312.5910 312.7312 312.8714 313.0116 313.1518 313.2919 313.4321 313.5722 313.7123 313.8524 313.9925 314.1326 314.2727 314.4128 314.5528 314.6929 314.8329 314.9729 315.1129 315.2529 315.3929 315.5329 315.6729 315.8128 315.9528 316.0927 316.2326 316.3725 316.5125 316.6523 316.7922 316.9321 317.0720 317.2118 317.3516 317.4915 317.6313 317.7711 317.9109 318.0507 318.1904 318.3302 318.4699 318.6097 318.7494 318.8891 319.0288 319.1685 319.3082 319.4478 319.5875 319.7272 319.8668 320.0064 320.1460 320.2856 320.4252 320.5648 320.7044 320.8439 320.9835 321.1230 321.2625 321.4021 321.5416 321.6810 321.8205 321.9600 322.0995 322.2389 322.3783 322.5178 322.6572 322.7966 322.9360 323.0753 323.2147 323.3541 323.4934 323.6327 323.7721 323.9114 324.0507 324.1900 324.3292 324.4685 324.6078 324.7470 324.8862 325.0254 325.1647 325.3038 325.4430 325.5822 325.7214 325.8605 325.9997 326.1388 326.2779
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Spectrometer control temperature [°C], 999=no temperature signal
Column 155: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 156: Temperature in head sensor [°C], 999=no temperature signal
Column 157: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 158: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 159: Humidity in head sensor [%], -9=no humidity signal
Column 160: Pressure in head sensor [hPa], -9=no pressure signal
Columns 161-305: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 306-450: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240919T083651.6Z 9028.358930 12 1 19.53 2 79.62 263.48 108.67 66.82 0.00 1 0.00 1 0 193 1.258e-01 2.431e-02 1.459e-01 7.907e-03 -7.064076e-06 2.994173e-06 3.994088e-06 4.520547e-07 5.537332e-05 228.85 -2.00 3.44 -2.00 323.51 0.00e+00 1.007943e-02 1.312382e-03 1.932080e-03 3.414206e-05 1.494044e-02 289.02 -2.00 20.00 -2.00 324.04 0.00e+00 1.145907e-02 1.730281e-03 6.098069e-04 3.028026e-05 2.699361e-02 289.02 -2.00 20.00 -2.00 322.98 0.00e+00 2.433360e-02 3.922687e-03 2.442943e-03 2.288989e-05 2.856167e-02 289.02 -2.00 20.00 -2.00 323.30 0.00e+00 4.344332e-01 1.554110e-02 6.088020e-03 1.149509e-03 1.666544e-01 172.46 7.47 0.00 0.19 278.85 321.43 0.00e+00 -1.456428e-02 1.767828e-03 2.894939e-03 1.739260e-05 4.283994e-03 289.02 -2.00 20.00 -2.00 320.33 0.00e+00 5.325 0.002 303.00 329.40 4 3.1916e+00 3.5452e-02 5.3890e-02 2.3034e-03 5.0990e-01 -6.3863e-02 5.0893e-02 6.4829e-02 4.1154e-04 5.4885e-01 -5.0571e-01 2.8526e-02 1.2083e-02 1.3181e-04 2.9785e-01 4.5590e-01 1.3743e-02 1.6963e-02 8.5505e-05 9.9568e-02 -1.2761e-01 1.0302e-02 1.7884e-03 9.0274e-05 7.4055e-02 7.4278e-05 1.9042e-01 1.2586e-02 8.9600e-09 8.2757e-11 1.3245e-07 -1.0335e-03 3.0519e-04 1.2286e-04 9.9843e-07 4.1758e-03 -2.5865e-03 0.0000e+00 5.5740e-01 4.0140e-01 1.5091e-01 6.5376e-04 5.1689e+00 12 9 9 12 1 1 98.05 25.33 1.32 -0.00259 -0.01047 6 2 4 8 0 2789.090 20.00 25.33 39.72 33.00 33.00 0.7 1037.08 2191 1228 -12676 7844 -26142 15248 47781 17084 20200 42049 109 33514 -9543 -6742 -6048 5876 52206 21797 3477 18576 -9358 -34753 -22499 -3215 -4504 -851 1623 -25187 14055 -8903 4434 14056 16159 28990 29908 22765 21645 18296 30537 -5040 -10990 7671 -7659 -11845 3792 6680 13781 16107 -1663 3889 2320 1898 -6974 -6047 16837 574 15653 387 1578 -3056 -5657 -4404 2084 -24 -3501 -215 -3684 -2679 2119 1556 -11319 -12889 539 -5579 -386 -1660 3514 7363 2249 2175 -1535 -3417 -3554 -1386 -8580 -8765 -5685 -3363 -2209 10025 2568 3569 -1813 1524 -1931 6277 -72 -2923 2621 1459 1654 2821 -208 1635 4004 -45 1984 -2532 483 -485 -2745 -1538 197 1550 -227 527 -328 -398 2195 -2114 -1916 -506 851 -1183 -429 -195 -907 -1209 160 149 527 221 1955 -3375 1224 1625 -1453 22 555 211 101 601 -13 4 -427 94 72 -1156 358 -3025 674 358 1049 1210 724 9 728 -957 -570 -480 387 391 1354 354 960 -757 -3955 -1718 -147 -273 -55 98 -2734 410 -873 461 1726 2468 3863 3963 3306 2901 2370 2766 -909 -2147 1068 -1502 -2784 775 1440 2930 3557 -463 1121 657 502 -2015 -1779 3882 175 4558 126 519 -948 -1898 -1648 831 -11 -1680 -96 -1597 -1028 744 520 -4291 -5763 244 -3201 -234 -1101 2303 4921 1547 1547 -1146 -2535 -2479 -948 -6032 -6103 -4090 -2473 -1861 8450 2441 3521 -1834 1483 -1782 5067 -66 -2987 2652 1463 1776 3262 -255 2116 5186 -60 2449 -3338 600 -624 -3547 -2080 270 2076 -301 674 -439 -510 2652 -2652 -2576 -698 1275 -1816 -684 -324 -1610 -2154 293 278 1001 416 3457 -6022 2142 2841 -2606 42 1100 458 227 1433 -33 9 -1042
SS 20240919T084540.0Z 9028.365047 16 1 53.67 2 81.36 264.85 107.09 68.27 0.00 1 0.00 1 7 258 4.071e-01 9.354e-02 1.052e-01 1.420e-02 -4.372324e-05 5.507351e-06 4.859804e-06 4.519802e-07 1.789258e-04 228.85 -2.00 3.44 -2.00 323.51 0.00e+00 1.699566e-02 2.292920e-03 2.174079e-03 3.398131e-05 4.830688e-02 289.02 -2.00 20.00 -2.00 323.97 0.00e+00 2.684521e-02 3.127644e-03 1.251494e-03 3.007659e-05 8.753993e-02 289.02 -2.00 20.00 -2.00 323.03 0.00e+00 4.177071e-02 5.806425e-03 4.630503e-03 2.261623e-05 9.241145e-02 289.02 -2.00 20.00 -2.00 323.28 0.00e+00 3.015328e-01 2.970429e-02 1.171736e-02 1.148850e-03 5.433696e-01 80.69 27.25 0.00 0.40 493.29 319.32 0.00e+00 -1.816174e-02 1.511256e-03 2.781694e-03 1.693328e-05 1.386157e-02 289.02 -2.00 20.00 -2.00 318.31 0.00e+00 6.274 0.004 303.00 329.40 4 4.0066e+00 5.4686e-02 6.7894e-02 2.3006e-03 1.6494e+00 -1.7800e-01 1.0709e-01 7.3991e-02 3.9024e-04 1.7793e+00 -6.0230e-01 5.4413e-02 2.0043e-02 1.1766e-04 9.6964e-01 4.0173e-01 1.8841e-02 1.8329e-02 4.9771e-05 3.2376e-01 -3.4416e-02 1.2463e-02 4.8249e-03 5.7097e-05 2.4037e-01 1.2807e-05 3.9571e-01 1.0001e-06 3.4051e-09 3.3499e-11 4.2607e-07 -2.7169e-03 5.5268e-04 2.2327e-04 1.0071e-06 1.3602e-02 -7.3558e-03 0.0000e+00 -2.4494e+00 6.1029e-01 1.3639e-01 4.4646e-04 1.4998e+01 12 10 8 10 0 0 99.96 25.36 2.12 -0.00736 -0.02809 15 1 4 8 0 3577.400 20.00 25.36 39.69 33.00 33.25 0.7 1037.12 75997 28135 -19690 51867 -43350 45203 132370 43843 19247 143170 -2498 160121 -16316 8228 -12985 21051 174843 73434 3686 59673 -19534 -36193 -13060 34805 -74 30776 65081 -35767 -676 -2272 8537 26210 21483 89182 73865 33830 43175 45135 173112 -21033 -24331 2485 -16639 -32694 41969 7695 34512 44303 -4352 -4917 -6115 3588 -30799 -12666 75291 7961 79611 2084 5790 14043 -6112 10923 -6365 8894 -11860 -298 -13058 2829 24968 32095 -15573 -22003 15243 -18524 -8268 -16707 18623 39690 10704 11144 -11041 -11203 -7602 -2264 -18701 -18146 -1255 -8088 -289 69344 8670 11041 -6754 5131 298 31811 2595 -10323 14420 5162 2945 16156 -1335 1550 12869 -1204 7772 -9497 5757 -19 -10373 -6648 2819 8498 -3689 -1535 -1548 2621 16989 -4365 -12242 -3580 1350 -4141 -605 2318 -4121 -3993 313 -1392 5682 3737 8878 -11709 747 10728 -4720 -2302 5959 -641 -727 1417 865 -130 -1412 10030 6567 -7603 9380 -19653 8562 10838 9054 5174 10847 -782 9392 -5303 1981 -3761 4630 9187 11307 1126 9480 -5777 -10703 -2841 4806 -15 4927 7396 -10359 -9 -511 2024 6214 6117 15105 14596 8723 10388 9889 10006 -7377 -8593 728 -5408 -13065 9252 2514 9139 11136 -1675 -1935 -2598 1297 -13587 -5159 13562 3050 15731 880 2187 4663 -2490 4023 -3097 3993 -6744 -148 -6934 1179 7652 8801 -7055 -11683 6352 -12176 -5402 -12554 10113 18246 6892 7385 -9157 -9005 -5538 -1455 -13474 -12781 -781 -6001 -225 30387 7785 10255 -6668 4580 252 18815 2169 -10629 12037 4892 3009 15636 -1535 1865 14294 -1528 8699 -11976 6022 -22 -13703 -8968 3562 10032 -4805 -1938 -1912 2981 17584 -4950 -15991 -4786 1874 -6441 -941 3622 -7231 -7440 584 -2706 10567 7101 15438 -23823 1293 16924 -9235 -4754 12249 -1383 -1693 3442 2191 -336 -3647