File name: Pandora149s1_Seoul-SNU_20190519_L2Fit_ffuh5c7d20190207p1-8.txt
File generation date: 20230830T205451.2Z
Data description: Level 2 spectral fitting results file
Data file version: ffuh5c7p1-8
Local principal investigator: Dr Chang-Keun Song
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 149
Spectrometer number: 1
Processing software version used: BlickP v1.8.49
Instrument operation file used: Pandora149_OF_v3d20181107.txt
Instrument calibration file used: Pandora149s1_CF_v7d20190207.txt
Level 1 file used: Pandora149s1_Seoul-SNU_20190519_L1_smca1c7d20190207p1-8.txt.bz2
Full location name: School of Earth and Environmental Sciences, Seoul National University
Short location name: Seoul-SNU
Country of location: South Korea
Location latitude [deg]: 37.4580
Location longitude [deg]: 126.9510
Location altitude [m]: 116
Local noon date: 20190519
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: OoB-data based on session 1
First and last pixel inside fitting window: 395 615
Nominal wavelengths inside fitting window [nm]: 328.5678 328.7067 328.8456 328.9845 329.1233 329.2621 329.4010 329.5398 329.6786 329.8174 329.9562 330.0950 330.2338 330.3726 330.5113 330.6501 330.7888 330.9275 331.0662 331.2049 331.3436 331.4823 331.6210 331.7597 331.8983 332.0370 332.1756 332.3143 332.4529 332.5915 332.7301 332.8687 333.0073 333.1458 333.2844 333.4229 333.5615 333.7000 333.8385 333.9770 334.1155 334.2540 334.3925 334.5310 334.6694 334.8079 334.9463 335.0848 335.2232 335.3616 335.5000 335.6384 335.7768 335.9151 336.0535 336.1918 336.3302 336.4685 336.6068 336.7451 336.8834 337.0217 337.1600 337.2983 337.4365 337.5748 337.7130 337.8512 337.9894 338.1276 338.2658 338.4040 338.5422 338.6804 338.8185 338.9566 339.0948 339.2329 339.3710 339.5091 339.6472 339.7853 339.9234 340.0614 340.1995 340.3375 340.4755 340.6135 340.7515 340.8895 341.0275 341.1655 341.3035 341.4414 341.5794 341.7173 341.8552 341.9931 342.1310 342.2689 342.4068 342.5447 342.6825 342.8204 342.9582 343.0960 343.2338 343.3716 343.5094 343.6472 343.7850 343.9227 344.0605 344.1982 344.3360 344.4737 344.6114 344.7491 344.8868 345.0244 345.1621 345.2997 345.4374 345.5750 345.7126 345.8502 345.9878 346.1254 346.2630 346.4006 346.5381 346.6756 346.8132 346.9507 347.0882 347.2257 347.3632 347.5007 347.6381 347.7756 347.9130 348.0505 348.1879 348.3253 348.4627 348.6001 348.7374 348.8748 349.0121 349.1495 349.2868 349.4241 349.5614 349.6987 349.8360 349.9733 350.1106 350.2478 350.3851 350.5223 350.6595 350.7967 350.9339 351.0711 351.2082 351.3454 351.4826 351.6197 351.7568 351.8939 352.0310 352.1681 352.3052 352.4423 352.5793 352.7164 352.8534 352.9904 353.1274 353.2644 353.4014 353.5384 353.6754 353.8123 353.9493 354.0862 354.2231 354.3600 354.4969 354.6338 354.7707 354.9075 355.0444 355.1812 355.3180 355.4549 355.5917 355.7284 355.8652 356.0020 356.1387 356.2755 356.4122 356.5489 356.6856 356.8223 356.9590 357.0957 357.2324 357.3690 357.5056 357.6423 357.7789 357.9155 358.0521 358.1887 358.3252 358.4618 358.5983 358.7348 358.8714
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Formaldehyde effective temperature [K]
Column 28: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Nitrogen dioxide effective temperature [K]
Column 39: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Oxygen dimer slant column amount [moles squared per meter to the 5th], -9e99=fitting not successful
Column 45: Independent uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Oxygen dimer effective temperature [K]
Column 50: Independent uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective oxygen dimer fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for oxygen dimer [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Ozone effective temperature [K]
Column 61: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Fitted Ring spectrum, -9e99=no fitting done or fitting not successful
Column 67: Independent uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 68: Structured uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 69: Common uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 70: rms-based uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 71: Effective Ring fitting wavelength [nm], -9=fitting not done or not successful
Column 72: Diffuse correction applied before fitting at effective Ring fitting wavelength [%], 0=no diffuse correction applied, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 73: Lower limit used for wavelength scaling [nm]
Column 74: Upper limit used for wavelength scaling [nm]
Column 75: Order of smoothing polynomial
Column 76: Smoothing polynomial coefficient, order 0
Column 77: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 78: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 79: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 80: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 81: Smoothing polynomial coefficient, order 1
Column 82: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 83: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 84: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 85: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 86: Smoothing polynomial coefficient, order 2
Column 87: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 88: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 89: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 90: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 91: Smoothing polynomial coefficient, order 3
Column 92: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 93: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 94: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 95: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 96: Smoothing polynomial coefficient, order 4
Column 97: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 98: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 99: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 100: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 101: Mean value of measured data inside fitting window [same units as measurements]
Column 102: Offset polynomial coefficient, order 0
Column 103: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 104: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 105: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 106: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 107: Offset polynomial coefficient, order 1
Column 108: Independent uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 109: Structured uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 110: Common uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 111: rms-based uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 112: Wavelength change polynomial coefficient, order 0
Column 113: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 114: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 115: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 116: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 117: Wavelength change polynomial coefficient, order 1
Column 118: Independent uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 119: Structured uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 120: Common uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 121: rms-based uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 122: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 123: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 124: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 125: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 126: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 127: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 128: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 129: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 130: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 131: Wavelength effective temperature [°C], 999=no effective temperature given
Column 132: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 133: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 134: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 135: Number of bright count cycles
Column 136: Number of dark count cycles
Column 137: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 138: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 139: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 140: Integration time [ms]
Column 141: Temperature at electronics board [°C], 999=no temperature signal
Column 142: Spectrometer control temperature [°C], 999=no temperature signal
Column 143: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 144-364: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 365-585: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------