File name: Pandora170s1_StGeorge_20240319_L2Fit_fsus1c1d20211219p1-8.txt
File generation date: 20240320T053045.0Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Vitali Fioletov
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 170
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora170_OF_v9d20200302.txt
Instrument calibration file used: Pandora170s1_CF_v1d20211219.txt
Level 1 file used: Pandora170s1_StGeorge_20240319_L1_smca1c1d20211219p1-8.txt
Full location name: University of Toronto - Downtown (St. George) campus
Short location name: StGeorge
Country of location: Canada
Location latitude [deg]: 43.6605
Location longitude [deg]: -79.3986
Location altitude [m]: 176
Local noon date: 20240319
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 222 366
Nominal wavelengths inside fitting window [nm]: 306.1021 306.2432 306.3843 306.5253 306.6664 306.8074 306.9485 307.0895 307.2305 307.3715 307.5124 307.6534 307.7944 307.9353 308.0763 308.2172 308.3581 308.4990 308.6399 308.7808 308.9216 309.0625 309.2033 309.3442 309.4850 309.6258 309.7666 309.9074 310.0481 310.1889 310.3297 310.4704 310.6111 310.7518 310.8925 311.0332 311.1739 311.3146 311.4552 311.5959 311.7365 311.8772 312.0178 312.1584 312.2990 312.4395 312.5801 312.7207 312.8612 313.0017 313.1422 313.2828 313.4232 313.5637 313.7042 313.8447 313.9851 314.1256 314.2660 314.4064 314.5468 314.6872 314.8276 314.9679 315.1083 315.2486 315.3890 315.5293 315.6696 315.8099 315.9502 316.0905 316.2307 316.3710 316.5112 316.6515 316.7917 316.9319 317.0721 317.2123 317.3524 317.4926 317.6327 317.7729 317.9130 318.0531 318.1932 318.3333 318.4734 318.6134 318.7535 318.8935 319.0336 319.1736 319.3136 319.4536 319.5936 319.7335 319.8735 320.0134 320.1534 320.2933 320.4332 320.5731 320.7130 320.8529 320.9927 321.1326 321.2724 321.4123 321.5521 321.6919 321.8317 321.9715 322.1112 322.2510 322.3907 322.5305 322.6702 322.8099 322.9496 323.0893 323.2290 323.3687 323.5083 323.6479 323.7876 323.9272 324.0668 324.2064 324.3460 324.4856 324.6251 324.7647 324.9042 325.0437 325.1832 325.3227 325.4622 325.6017 325.7412 325.8806 326.0201 326.1595 326.2989
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240319T134301.0Z 8844.571540 241 1 49.85 2 66.01 115.50 111.30 3.60 0.00 1 0.00 1 7 258 1.401e+00 1.182e-01 4.486e-02 3.797e-03 8.972965e-06 1.426769e-06 1.642253e-05 8.922949e-07 6.079819e-04 226.15 -2.00 3.57 -2.00 321.88 0.00e+00 -1.343614e-03 5.659419e-04 8.952854e-03 3.868338e-05 1.629004e-01 274.58 -2.00 20.00 -2.00 322.21 0.00e+00 1.764618e-02 7.396661e-04 1.485187e-03 5.988847e-05 3.020908e-01 274.58 -2.00 20.00 -2.00 322.04 0.00e+00 -4.430295e-03 1.249044e-03 7.954217e-03 5.662302e-05 3.049496e-01 274.58 -2.00 20.00 -2.00 321.90 0.00e+00 3.513187e-01 6.758657e-03 2.987429e-02 1.042365e-02 1.775792e+00 92.30 5.15 0.00 2.32 1384.91 315.33 0.00e+00 -7.815854e-02 1.981934e-04 7.260434e-03 1.226043e-04 4.382999e-02 274.58 -2.00 20.00 -2.00 315.27 0.00e+00 2.442 0.000 303.00 329.40 4 5.5710e+00 1.3778e-02 7.1936e-02 4.5729e-03 5.4723e+00 -5.0614e-01 2.4004e-02 2.6440e-01 1.4119e-03 5.9281e+00 7.4218e-01 1.2444e-02 2.9270e-02 5.5233e-04 3.1921e+00 -1.6105e+00 4.1952e-03 5.3636e-02 1.5753e-04 1.0766e+00 8.7671e-01 3.2008e-03 2.5195e-02 1.2988e-04 8.3062e-01 2.4627e-04 2.8925e-02 3.3524e-07 3.4804e-07 8.2848e-09 1.6347e-06 -1.6465e-03 1.2993e-04 3.5770e-04 1.9469e-06 4.6465e-02 -7.5233e-02 -2.7306e-04 -3.9342e+00 3.0341e-01 1.0522e+00 5.9455e-03 9.2956e+01 12 11 9 12 32 32 99.96 23.36 2.00 -0.07523 -0.08780 13 3 1 5 0 3833.580 27.26 20.00 23.36 5.81 8.3 986.69 -337996 -1830 -423018 -477589 2899 -491475 -471528 -467572 -438852 -460140 -446911 6142 -400496 -285914 -323426 -216669 -107087 -201757 -100707 -28526 -139032 -147620 -162022 -187632 -171918 -172011 -171104 -152514 -139523 -118040 -105737 -66662 -12351 -20740 -19044 -21263 -24585 -3204 -47155 -59003 -42964 -19988 -3757 -42102 -37246 11824 -6201 6942 14401 21897 44190 21204 14355 -10446 -709 -9466 2468 -379 -906 -5694 1136 5331 8615 10542 21373 27941 15513 16339 10322 9473 24147 24757 -956 2834 748 2995 14085 5815 4133 10033 -2 -2906 -4360 -5653 5696 12930 12344 9951 -351 -4370 -7043 -5178 -4614 -12914 -4943 -2579 -8063 -2541 -5756 -8843 -6170 -368 -3497 -3334 -2694 -1521 2788 -537 -3003 -3314 -4788 -4294 -2246 -3779 -3680 2830 5324 3379 2222 920 4898 3328 3390 2868 1894 1880 466 5809 1386 3471 1764 78 620 270 1446 1626 587 2350 1347 866 267 -453 -1810 -1684 -5046 -3347 -1432 -7875 -21354 3682 -31555 -26235 -28343 -24635 -37301 -37930 15097 -32765 -10525 -21716 -8532 -2919 -22465 -6570 -1149 -14375 -13848 -14961 -21516 -18865 -22226 -26182 -21952 -19937 -17395 -19744 -13071 -2136 -5022 -5145 -5932 -6658 -655 -13374 -17782 -11107 -4368 -766 -13622 -13299 3129 -2228 2613 5961 9653 16899 9393 6077 -5077 -320 -4883 1231 -200 -466 -2998 589 2918 5193 6911 13575 16993 10101 9918 6023 5166 11202 11604 -601 1917 571 2444 11082 5083 3803 9059 -1 -2827 -4106 -5103 4546 9600 9332 8077 -329 -4459 -7759 -5863 -5159 -14556 -4902 -2405 -8096 -2644 -6427 -10373 -7357 -443 -4581 -4611 -3811 -2123 3662 -687 -3733 -4088 -6124 -5696 -3032 -5170 -4958 3613 6636 4182 2693 1090 5728 4229 4609 4089 2787 2820 728 9126 2312 5767 2977 133 1024 430 2209 2469 932 3903 2381 1610 521 -924 -3795 -3543 -10662
SS 20240319T160131.9Z 8844.667731 330 1 14.27 2 47.65 151.12 103.72 34.03 0.00 1 0.00 1 0 65 1.366e-02 6.915e-03 6.167e-03 2.655e-03 -2.696109e-06 1.015843e-06 1.316070e-07 8.916068e-07 6.344257e-06 226.16 -2.00 3.57 -2.00 321.31 0.00e+00 2.439392e-03 3.498265e-04 5.862666e-05 3.829887e-05 1.619369e-03 274.59 -2.00 20.00 -2.00 320.88 0.00e+00 -6.785076e-04 4.901561e-04 3.084449e-05 6.049833e-05 2.927359e-03 274.59 -2.00 20.00 -2.00 321.27 0.00e+00 1.543236e-03 6.710380e-04 1.371265e-04 4.137895e-05 2.979466e-03 274.59 -2.00 20.00 -2.00 321.17 0.00e+00 2.662254e-01 3.664035e-03 3.201000e-04 1.049349e-02 1.696912e-02 224.11 3.32 0.00 2.23 29.39 317.50 0.00e+00 6.940434e-04 1.903633e-04 4.170302e-05 1.224834e-04 4.258945e-04 274.59 -2.00 20.00 -2.00 316.59 0.00e+00 1.482 0.000 303.00 329.40 4 4.0292e+00 9.5794e-03 1.4136e-02 4.5737e-03 5.2850e-02 6.3042e-02 1.3091e-02 2.6421e-03 1.0336e-03 5.7140e-02 -5.7473e-04 7.1171e-03 5.2255e-04 4.3907e-04 3.0985e-02 5.4798e-04 3.1407e-03 4.5675e-04 1.8306e-04 1.2052e-02 -6.3954e-03 2.2095e-03 2.9114e-04 1.3055e-04 8.7710e-03 1.6107e-03 3.6521e-02 2.1701e-03 1.6027e-04 6.8886e-05 3.0706e-03 -1.4553e-03 8.0409e-05 5.6041e-06 2.2796e-06 4.4908e-04 -7.9306e-02 -7.1343e-05 -4.4003e-01 2.7731e-01 8.4044e-03 1.5747e-03 1.1623e+00 12 9 9 12 33 1 99.99 23.35 0.91 -0.07931 -0.09041 10 8 1 5 0 1296.380 27.26 20.00 23.35 7.59 8.3 984.09 -66 -4293 -437 3653 -659 -613 3951 2280 1392 366 1280 713 -1251 -354 -6038 -1802 -2605 1411 -2931 -1318 111 2992 3429 -1382 -146 1061 417 -1324 3829 133 -2898 -685 -980 954 1403 2524 -1908 1634 1919 295 183 932 1607 49 -2154 1279 91 -981 2203 -933 -312 -258 -348 -331 -1284 186 -601 -126 -1060 1348 -1206 1761 -1439 -1960 -6 -344 554 -98 260 -1273 -453 407 1687 -864 1075 -279 320 904 55 474 -769 615 770 10 -252 231 -426 -716 -959 -1074 985 -207 842 -1055 -146 582 99 -33 299 315 -1 674 -286 173 144 -33 203 -824 -209 514 692 116 -262 -431 387 298 -495 692 -142 -821 -610 -766 40 -256 298 367 255 257 216 -180 -207 -326 -183 88 154 127 1 -204 20 -239 279 301 -162 84 -66 -8 -589 -62 500 -96 -99 693 462 315 89 315 183 -338 -97 -1749 -502 -761 418 -935 -418 34 835 930 -406 -46 352 147 -466 1252 48 -1198 -317 -512 530 804 1465 -1157 963 1127 174 107 534 917 29 -1367 825 61 -683 1519 -666 -222 -182 -244 -236 -964 146 -494 -105 -851 1010 -905 1335 -1204 -1755 -6 -313 490 -84 206 -959 -330 303 1346 -762 998 -274 322 939 60 530 -880 697 853 10 -254 221 -401 -698 -999 -1193 1146 -253 1017 -1242 -163 623 107 -38 356 384 -1 866 -382 239 200 -45 265 -1032 -251 612 846 148 -348 -581 513 388 -632 852 -170 -965 -715 -938 51 -338 399 497 353 369 319 -270 -314 -497 -275 129 222 180 1 -308 32 -392 475 528 -291 152 -119