File name: Pandora170s1_StGeorge_20240512_L2Fit_ffuh5c8d20220508p1-8.txt
File generation date: 20240514T132439.1Z
Data description: Level 2 spectral fitting results file
Data file version: ffuh5c8p1-8
Local principal investigator: Vitali Fioletov
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 170
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora170_OF_v9d20200302.txt
Instrument calibration file used: Pandora170s1_CF_v8d20220508.txt
Level 1 file used: Pandora170s1_StGeorge_20240512_L1_smca1c8d20220508p1-8.txt
Full location name: University of Toronto - Downtown (St. George) campus
Short location name: StGeorge
Country of location: Canada
Location latitude [deg]: 43.6605
Location longitude [deg]: -79.3986
Location altitude [m]: 176
Local noon date: 20240512
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 383 603
Nominal wavelengths inside fitting window [nm]: 328.5821 328.7213 328.8604 328.9995 329.1387 329.2778 329.4169 329.5559 329.6950 329.8341 329.9731 330.1122 330.2512 330.3902 330.5292 330.6682 330.8072 330.9462 331.0851 331.2241 331.3630 331.5019 331.6408 331.7797 331.9186 332.0575 332.1964 332.3352 332.4741 332.6129 332.7517 332.8905 333.0293 333.1681 333.3069 333.4456 333.5844 333.7231 333.8618 334.0005 334.1392 334.2779 334.4166 334.5553 334.6939 334.8326 334.9712 335.1098 335.2484 335.3870 335.5256 335.6642 335.8027 335.9413 336.0798 336.2183 336.3568 336.4953 336.6338 336.7723 336.9108 337.0492 337.1877 337.3261 337.4645 337.6029 337.7413 337.8797 338.0181 338.1564 338.2948 338.4331 338.5714 338.7098 338.8481 338.9863 339.1246 339.2629 339.4011 339.5394 339.6776 339.8158 339.9540 340.0922 340.2304 340.3686 340.5067 340.6449 340.7830 340.9211 341.0592 341.1973 341.3354 341.4735 341.6116 341.7496 341.8876 342.0257 342.1637 342.3017 342.4397 342.5777 342.7156 342.8536 342.9915 343.1295 343.2674 343.4053 343.5432 343.6811 343.8189 343.9568 344.0946 344.2325 344.3703 344.5081 344.6459 344.7837 344.9215 345.0592 345.1970 345.3347 345.4724 345.6102 345.7479 345.8855 346.0232 346.1609 346.2985 346.4362 346.5738 346.7114 346.8490 346.9866 347.1242 347.2618 347.3993 347.5369 347.6744 347.8119 347.9495 348.0870 348.2244 348.3619 348.4994 348.6368 348.7743 348.9117 349.0491 349.1865 349.3239 349.4613 349.5986 349.7360 349.8733 350.0106 350.1479 350.2852 350.4225 350.5598 350.6971 350.8343 350.9716 351.1088 351.2460 351.3832 351.5204 351.6576 351.7948 351.9319 352.0691 352.2062 352.3433 352.4804 352.6175 352.7546 352.8917 353.0287 353.1658 353.3028 353.4398 353.5768 353.7138 353.8508 353.9878 354.1247 354.2617 354.3986 354.5355 354.6724 354.8093 354.9462 355.0831 355.2199 355.3568 355.4936 355.6304 355.7672 355.9040 356.0408 356.1776 356.3144 356.4511 356.5878 356.7246 356.8613 356.9980 357.1346 357.2713 357.4080 357.5446 357.6813 357.8179 357.9545 358.0911 358.2277 358.3642 358.5008 358.6373 358.7739 358.9104
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Formaldehyde effective temperature [K]
Column 28: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Nitrogen dioxide effective temperature [K]
Column 39: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Oxygen dimer slant column amount [moles squared per meter to the 5th], -9e99=fitting not successful
Column 45: Independent uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Oxygen dimer effective temperature [K]
Column 50: Independent uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective oxygen dimer fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for oxygen dimer [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Ozone effective temperature [K]
Column 61: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Fitted Ring spectrum, -9e99=no fitting done or fitting not successful
Column 67: Independent uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 68: Structured uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 69: Common uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 70: rms-based uncertainty of fitted Ring spectrum, -9=fitting not successful
Column 71: Effective Ring fitting wavelength [nm], -9=fitting not done or not successful
Column 72: Diffuse correction applied before fitting at effective Ring fitting wavelength [%], 0=no diffuse correction applied, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 73: Lower limit used for wavelength scaling [nm]
Column 74: Upper limit used for wavelength scaling [nm]
Column 75: Order of smoothing polynomial
Column 76: Smoothing polynomial coefficient, order 0
Column 77: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 78: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 79: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 80: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 81: Smoothing polynomial coefficient, order 1
Column 82: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 83: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 84: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 85: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 86: Smoothing polynomial coefficient, order 2
Column 87: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 88: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 89: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 90: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 91: Smoothing polynomial coefficient, order 3
Column 92: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 93: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 94: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 95: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 96: Smoothing polynomial coefficient, order 4
Column 97: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 98: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 99: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 100: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 101: Mean value of measured data inside fitting window [same units as measurements]
Column 102: Offset polynomial coefficient, order 0
Column 103: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 104: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 105: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 106: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 107: Offset polynomial coefficient, order 1
Column 108: Independent uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 109: Structured uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 110: Common uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 111: rms-based uncertainty of offset polynomial coefficient, order 1, -9=fitting not successful
Column 112: Wavelength change polynomial coefficient, order 0
Column 113: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 114: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 115: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 116: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 117: Wavelength change polynomial coefficient, order 1
Column 118: Independent uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 119: Structured uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 120: Common uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 121: rms-based uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 122: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 123: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 124: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 125: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 126: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 127: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 128: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 129: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 130: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 131: Wavelength effective temperature [°C], 999=no effective temperature given
Column 132: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 133: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 134: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 135: Number of bright count cycles
Column 136: Number of dark count cycles
Column 137: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 138: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 139: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 140: Integration time [ms]
Column 141: Temperature at electronics board [°C], 999=no temperature signal
Column 142: Spectrometer control temperature [°C], 999=no temperature signal
Column 143: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 144: Temperature in head sensor [°C], 999=no temperature signal
Column 145: Humidity in head sensor [%], -9=no humidity signal
Column 146: Pressure in head sensor [hPa], -9=no pressure signal
Columns 147-367: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 368-588: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------