File name: Pandora123s1_StonyPlain_20190116_L2Fit_fsus1c1d20181017p1-8.txt
File generation date: 20250129T000041.6Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c1p1-8
Local principal investigator: Martin Tiefengraber
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 123
Spectrometer number: 1
Processing software version used: BlickP v1.8.70
Instrument operation file used: Pandora123_OF_v3d20161109.txt
Instrument calibration file used: Pandora123s1_CF_v1d20181017.txt
Level 1 file used: Pandora123s1_StonyPlain_20190116_L1_smca1c1d20181017p1-8.txt
Full location name: Stony Plain Upper Air Station (CWSE)
Short location name: StonyPlain
Country of location: Canada
Location latitude [deg]: 53.5500
Location longitude [deg]: -114.1100
Location altitude [m]: 766
Local noon date: 20190116
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, radiometric temperature correction, matrix method stray light correction (replaced by simple method)
Data caveats: Fieldcal for 2018-data based on session 3
First and last pixel inside fitting window: 225 370
Nominal wavelengths inside fitting window [nm]: 306.0535 306.1945 306.3355 306.4765 306.6175 306.7585 306.8995 307.0404 307.1814 307.3223 307.4633 307.6042 307.7451 307.8860 308.0269 308.1678 308.3086 308.4495 308.5903 308.7312 308.8720 309.0128 309.1536 309.2944 309.4352 309.5759 309.7167 309.8574 309.9981 310.1389 310.2796 310.4203 310.5610 310.7016 310.8423 310.9830 311.1236 311.2642 311.4049 311.5455 311.6861 311.8267 311.9672 312.1078 312.2484 312.3889 312.5294 312.6700 312.8105 312.9510 313.0915 313.2319 313.3724 313.5129 313.6533 313.7937 313.9342 314.0746 314.2150 314.3553 314.4957 314.6361 314.7764 314.9168 315.0571 315.1974 315.3377 315.4780 315.6183 315.7586 315.8989 316.0391 316.1794 316.3196 316.4598 316.6000 316.7402 316.8804 317.0206 317.1608 317.3009 317.4410 317.5812 317.7213 317.8614 318.0015 318.1416 318.2817 318.4217 318.5618 318.7018 318.8418 318.9819 319.1219 319.2619 319.4018 319.5418 319.6818 319.8217 319.9617 320.1016 320.2415 320.3814 320.5213 320.6612 320.8011 320.9409 321.0808 321.2206 321.3604 321.5002 321.6400 321.7798 321.9196 322.0594 322.1991 322.3389 322.4786 322.6183 322.7581 322.8978 323.0374 323.1771 323.3168 323.4564 323.5961 323.7357 323.8753 324.0150 324.1545 324.2941 324.4337 324.5733 324.7128 324.8524 324.9919 325.1314 325.2709 325.4104 325.5499 325.6894 325.8288 325.9683 326.1077 326.2471 326.3866
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Columns 157-302: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 303-448: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SU 20190116T161409.0Z 6955.676493 22 1 32.01 2 87.31 131.67 112.16 11.87 0.00 1 0.00 1 7 262 9.687e-01 1.862e-01 2.048e-01 7.351e-02 2.122806e-05 2.737005e-05 2.439470e-06 7.876820e-07 4.055024e-04 221.11 -2.00 3.88 -2.00 320.59 0.00e+00 4.426154e-02 9.246679e-03 9.211523e-04 2.077329e-05 1.118378e-01 261.23 -2.00 20.00 -2.00 320.51 0.00e+00 8.963066e-02 1.476107e-02 6.462688e-04 5.339803e-05 2.052883e-01 261.23 -2.00 20.00 -2.00 320.75 0.00e+00 4.438329e-02 1.589556e-02 4.093248e-03 2.827830e-05 2.035741e-01 261.23 -2.00 20.00 -2.00 320.32 0.00e+00 -7.883230e-02 9.495490e-02 6.504108e-03 2.854054e-03 1.241690e+00 1522.11 2873.92 0.00 79.74 37455.35 315.29 0.00e+00 -9.266457e-03 2.781367e-03 1.503771e-03 4.841237e-05 2.964569e-02 261.23 -2.00 20.00 -2.00 313.18 0.00e+00 14.474 0.068 303.00 329.40 4 -1.3646e+00 2.6211e-01 1.4544e-01 4.0722e-03 3.7369e+00 5.6567e-01 3.1480e-01 4.5464e-02 5.8411e-04 4.0229e+00 2.4537e-01 1.7091e-01 1.3715e-02 1.8736e-04 2.1980e+00 -6.7408e-02 5.8785e-02 7.0893e-03 5.6362e-05 7.4513e-01 -1.2686e-02 4.5800e-02 4.0250e-03 5.2404e-05 5.5816e-01 8.7596e-07 5.1707e+00 5.3844e-02 3.2862e-04 1.0569e-05 1.7326e-01 -1.9283e-03 2.0875e-03 1.3543e-04 1.6402e-06 2.7621e-02 1.4738e-02 0.0000e+00 2.4664e+00 1.4916e+00 9.4321e-02 4.1174e-04 1.7369e+01 12 11 8 11 8 0 -88.40 21.34 -6.37 0.01474 0.00003 8 2 1 5 0 4000.000 26.62 19.97 21.34 -13451 1947 17483 -620690 -15956 4300 19092 2820 15733 21239 22431 12418 11849 -684 12015 8238 -556046 -305232 27302 -136853 2375 -4594 -16597 -90951 -15072 -11096 -6368 -12543 -17817 -27606 -27252 -20202 25434 37108 44986 -285580 900000 32500 29744 15267 -3851 14931 11261 -23793 -70375 20037 24542 -253892 17663 15144 -365353 834 15283 14557 -19105 10321 21960 -5010 7781 -3482 -8537 -3649 7122 4800 15110 12513 -241670 -50537 7855 -16908 -20855 -25229 -113877 15555 22669 11835 -12659 14586 21904 21833 9578 13971 -57138 -4591 -29615 -9482 -23881 -8855 -6949 20928 25681 19417 -29267 22593 6380 4375 11894 2233 10784 23068 8881 23016 14599 27233 26322 14574 3473 -19003 -10029 -2988 2622 9932 -17733 16694 23663 15074 14289 -5765 -7408 470 -21265 3291 -16030 6580 5105 -3520 -1845 -7779 13059 13469 -4892 -6875 7351 8273 16572 1319 -14689 15508 477 10518 4348 -1817 14897 9127 -14158 900000 -10828 1654 10011 -43184 -20793 1726 14136 921 5810 18787 15494 5317 9186 -717 7973 6263 -41910 -33624 18849 -23010 2219 -2290 -7794 -22147 -9525 -7838 -4056 -9532 -14780 -10404 -40358 -6091 11207 33165 32081 -31459 900000 25742 16210 16014 -1384 11080 6660 -40239 -17359 16496 17928 -33723 17771 6992 -39284 353 11253 9115 -6525 11047 13750 -6837 5955 -2379 -6088 -2518 5863 5482 13578 12623 -33628 -14064 5647 -20979 -9233 -37446 -23769 14791 13908 13243 -19648 13700 16763 15823 4544 7953 -15540 -4978 -45329 -7796 -30599 -10011 -9669 19171 26949 25893 -8330 14004 6917 4541 10757 1072 11816 17508 11071 20380 16929 24114 22808 15762 3684 -27324 -11799 -2968 1642 6496 -32592 18373 18708 15350 10538 -2808 -9698 307 -30822 3185 -25094 6992 5327 -4363 -2264 -11808 13132 14482 -7460 -10762 9066 9523 12798 1743 -25039 17067 845 17563 7992 -3845 26476 17606 -33984 900000
SU 20190116T162829.0Z 6955.686447 28 1 32.01 2 85.75 134.64 111.64 15.42 0.00 1 0.00 1 7 260 4.978e-01 2.815e-01 1.278e-01 5.338e-02 7.238718e-05 1.973064e-05 2.005422e-06 7.877531e-07 2.063010e-04 221.11 -2.00 3.88 -2.00 321.37 0.00e+00 4.713500e-02 6.924639e-03 1.369161e-03 2.063436e-05 5.729256e-02 261.23 -2.00 20.00 -2.00 321.72 0.00e+00 5.225578e-02 1.050200e-02 7.045661e-04 5.330994e-05 1.046441e-01 261.23 -2.00 20.00 -2.00 321.43 0.00e+00 6.923672e-02 1.239372e-02 4.865945e-03 2.839152e-05 1.045376e-01 261.23 -2.00 20.00 -2.00 321.23 0.00e+00 1.179047e-01 7.166321e-02 7.563715e-03 2.858248e-03 6.356378e-01 -1020.89 977.67 0.00 34.29 8583.69 318.17 0.00e+00 -5.717372e-03 2.227595e-03 7.029901e-04 4.840874e-05 1.435930e-02 261.23 -2.00 20.00 -2.00 314.10 0.00e+00 11.109 0.031 303.00 329.40 4 1.5359e+00 1.9086e-01 1.1307e-01 4.0719e-03 1.9142e+00 2.8642e-01 2.4150e-01 4.9887e-02 5.7372e-04 2.0547e+00 2.9632e-01 1.3281e-01 1.7755e-02 1.7469e-04 1.1309e+00 1.0077e-02 4.5191e-02 6.8498e-03 5.5524e-05 3.8250e-01 -2.5724e-01 3.2293e-02 4.4201e-03 5.2772e-05 2.7826e-01 1.6204e-06 1.6211e+00 1.0002e-06 1.9770e-09 3.7656e-11 5.1354e-07 5.5438e-03 1.6212e-03 1.2908e-04 1.5796e-06 1.4764e-02 -1.8991e-02 0.0000e+00 9.6362e+00 1.3478e+00 1.0590e-01 3.5786e-04 1.1256e+01 12 10 8 10 0 0 -95.28 21.39 -6.61 -0.01899 0.02331 8 2 1 5 0 4000.000 26.73 20.00 21.39 -18144 -910 22744 91908 -53674 47952 42684 87686 96562 22516 16015 47275 -1990 -8696 10032 4380 114201 124550 747 70814 -21182 29711 21114 64552 -5511 -35996 1149 -17872 -28124 88178 -71449 92531 84374 8729 47896 111503 -148 25177 62490 -11012 44553 10782 21167 -54800 120531 11883 56022 116294 17142 47950 180751 55687 28844 67175 52101 -13380 23539 -27518 19976 18050 17696 17928 28240 -10076 22940 -21336 124325 71254 16873 -34487 41804 -53110 126948 21596 66405 4215 -27691 14289 42813 20231 58885 60802 51569 -6062 -54197 -10065 -41230 -14042 -19741 26298 22568 555 75084 56310 -3081 -7638 17615 92042 -14250 31001 -6607 39746 2128 32578 38229 10628 770 -31855 3865 -15387 43434 37532 -38488 6357 38087 12718 53320 31927 -23504 36679 -23707 -1970 -18549 12654 18919 -3282 -2794 -13335 17406 25260 -5971 -5009 7139 -5267 49125 1745 -11197 21938 -6053 6947 2282 -2509 10276 16517 -11447 -6424 -10943 -529 11943 25949 -55435 22227 23203 33256 34588 15064 10777 23906 -1409 -6291 5892 2658 24543 24668 491 24470 -14995 12520 9609 17681 -3019 -26043 649 -11749 -20384 23917 -89767 30202 32969 7026 29064 35369 -7 16551 30738 -9977 23759 7133 12666 -67359 32137 9013 30647 35285 12786 28215 26590 26880 18034 29646 28023 -13307 16268 -30614 14050 12032 11470 12280 19993 -10064 17400 -22298 35835 34590 12023 -34298 22619 -68484 39159 18201 40601 4245 -36058 12283 30703 17485 35733 34744 31554 -5574 -67603 -8514 -47258 -15622 -24624 25871 25521 735 47288 37794 -3512 -9059 15953 42820 -17622 25938 -8566 32889 2651 31151 34797 12020 874 -45982 3802 -18886 30350 28124 -64403 7160 31692 12804 35591 22603 -29822 26473 -32258 -2291 -27458 14543 20787 -4496 -3904 -21639 21765 30076 -9716 -7760 9354 -7700 42683 2406 -17398 25616 -10462 11880 4470 -5491 20456 31966 -27496 -16302