File name: Pandora108s1_Toronto-West_20240110_L2Fit_fout2c6d20211104p1-8.txt
File generation date: 20240820T170226.7Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c6p1-8
Local principal investigator: Vitali Fioletov
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 108
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora108_OF_v3d20210713.txt
Instrument calibration file used: Pandora108s1_CF_v6d20211104.txt
Level 1 file used: Pandora108s1_Toronto-West_20240110_L1_smca1c6d20211104p1-8.txt
Full location name: Ontario Ministry of the Environment, Toronto West (Etobicoke)
Short location name: Toronto-West
Country of location: Canada
Location latitude [deg]: 43.7094
Location longitude [deg]: -79.5435
Location altitude [m]: 141
Local noon date: 20240110
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: None
First and last pixel inside fitting window: 231 373
Nominal wavelengths inside fitting window [nm]: 305.0401 305.1807 305.3213 305.4619 305.6025 305.7430 305.8836 306.0241 306.1647 306.3052 306.4457 306.5863 306.7268 306.8673 307.0078 307.1483 307.2887 307.4292 307.5697 307.7101 307.8506 307.9910 308.1315 308.2719 308.4123 308.5527 308.6931 308.8335 308.9739 309.1143 309.2546 309.3950 309.5353 309.6757 309.8160 309.9564 310.0967 310.2370 310.3773 310.5176 310.6579 310.7981 310.9384 311.0787 311.2189 311.3591 311.4994 311.6396 311.7798 311.9200 312.0602 312.2004 312.3406 312.4807 312.6209 312.7610 312.9012 313.0413 313.1814 313.3215 313.4617 313.6017 313.7418 313.8819 314.0220 314.1620 314.3021 314.4421 314.5821 314.7222 314.8622 315.0022 315.1422 315.2822 315.4221 315.5621 315.7020 315.8420 315.9819 316.1218 316.2618 316.4017 316.5416 316.6814 316.8213 316.9612 317.1010 317.2409 317.3807 317.5205 317.6604 317.8002 317.9400 318.0797 318.2195 318.3593 318.4990 318.6388 318.7785 318.9182 319.0580 319.1977 319.3374 319.4770 319.6167 319.7564 319.8960 320.0357 320.1753 320.3149 320.4545 320.5941 320.7337 320.8733 321.0129 321.1525 321.2920 321.4315 321.5711 321.7106 321.8501 321.9896 322.1291 322.2686 322.4080 322.5475 322.6869 322.8264 322.9658 323.1052 323.2446 323.3840 323.5234 323.6627 323.8021 323.9414 324.0808 324.2201 324.3594 324.4987 324.6380 324.7773 324.9166
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-242: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 243-385: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240110T192624.6Z 8775.810007 249 1 5.58 2 71.26 209.51 81.37 214.99 0.00 1 0.00 1 0 17 3.074e-01 2.037e-02 2.744e-01 1.856e-02 5.207586e-01 9.697664e-03 6.225052e-03 -6.000000e+00 1.765911e-01 223.24 -2.00 3.57 -2.00 319.96 0.00e+00 2.418809e-03 2.997506e-03 6.846682e-04 -6.000000e+00 8.022121e-03 272.43 -2.00 20.00 -2.00 319.47 0.00e+00 3.075 0.001 302.00 328.00 3 4.5328e+00 2.7553e-02 4.0514e-02 -6.0000e+00 4.3512e-01 1.6588e-01 3.3073e-02 2.7095e-02 -6.0000e+00 4.7419e-01 -9.4621e-02 2.9366e-02 1.4313e-02 -6.0000e+00 2.8164e-01 2.7865e-02 1.5357e-02 4.9371e-03 -6.0000e+00 1.2083e-01 1.3588e-04 -9.2099e-04 5.4774e-04 5.8407e-05 -6.0000e+00 8.7907e-03 -6.9429e-04 -2.6306e-05 12 9 9 12 1 1 999.00 18.08 0.61 -0.00069 -0.00762 1 4 1 5 0 2785.130 23.53 15.00 18.08 5.83 28.3 990.36 -107796 900000 -97252 900000 -76590 900000 -64866 26610 44389 -72895 -17055 -80491 900000 -41522 900000 -35387 181880 -4538 18878 94082 -31120 63422 -49366 61734 -33767 95394 -7487 43896 20696 54348 9188 -17307 19561 -16919 35536 -21262 20074 -12282 24752 4799 14849 8263 -3908 6347 51 11134 -7319 17138 -8797 2426 3059 10212 2722 7695 6063 -6191 7288 -7872 5111 -5204 2536 2211 1889 5178 -895 6937 -4566 9797 -3440 3702 -1280 1872 -656 1867 -1535 -4125 3277 -5626 1271 -3942 578 -3512 944 -1329 -1059 2006 -2458 3000 -1941 1020 -1126 493 -2306 531 -2197 -711 3091 -1904 1351 -2139 947 -1370 2027 -2393 -913 -972 -178 1210 -1171 425 -1272 2934 -790 -1197 1733 357 -172 534 921 -2200 1296 -1260 1572 705 943 -23 1167 1442 -686 1669 -1778 1426 -865 1436 -1258 508 -393 -22 1006 -1569 32 -625 155 -3255 900000 -3292 900000 -1943 900000 -1481 481 803 -2393 -345 -3190 900000 -1657 900000 -1900 3289 -220 779 2012 -2223 1864 -4301 2005 -2894 2536 -537 1879 1075 2099 612 -1701 1539 -2018 2521 -2529 1710 -1647 2792 778 2445 1563 -863 1311 11 2245 -1774 3335 -2239 577 781 2658 827 2384 2017 -2376 2533 -3159 1776 -1958 901 849 801 2353 -448 3186 -2241 4220 -1775 2005 -799 1190 -429 1142 -907 -2261 1552 -2806 632 -2337 376 -2649 741 -1125 -942 1844 -2449 2946 -1989 996 -1058 426 -1939 431 -1950 -691 3263 -2321 1730 -2847 1181 -1608 2146 -2602 -1029 -1159 -219 1548 -1615 626 -2034 4737 -1315 -1934 2604 516 -247 783 1412 -3595 2085 -2029 2402 1054 1357 -32 1565 1948 -1005 2619 -3060 2504 -1589 2690 -2524 1046 -834 -46 2151 -3342 65 -1219 291