File name: Pandora163s1_Tsukuba-NIES-West_20240225_L2Fit_fout2c12d20240101p1-8.txt
File generation date: 20241007T150531.9Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c12p1-8
Local principal investigator: Jinsoo Park
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 163
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora163_OF_v9d20190605.txt
Instrument calibration file used: Pandora163s1_CF_v12d20240101.txt
Level 1 file used: Pandora163s1_Tsukuba-NIES-West_20240225_L1_smca1c12d20240101p1-8.txt
Full location name: National Institute for Environmental Studies (NIES), lidar building
Short location name: Tsukuba-NIES-West
Country of location: Japan
Location latitude [deg]: 36.0506
Location longitude [deg]: 140.1202
Location altitude [m]: 30
Local noon date: 20240225
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are dark map for dark correction (replaced by immediate dark method), latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Based on session 11 for fieldcal for VP from 20240101
First and last pixel inside fitting window: 225 366
Nominal wavelengths inside fitting window [nm]: 305.1227 305.2636 305.4045 305.5454 305.6863 305.8272 305.9680 306.1089 306.2497 306.3906 306.5314 306.6722 306.8130 306.9538 307.0946 307.2353 307.3761 307.5168 307.6575 307.7982 307.9390 308.0796 308.2203 308.3610 308.5017 308.6423 308.7829 308.9236 309.0642 309.2048 309.3454 309.4860 309.6265 309.7671 309.9076 310.0482 310.1887 310.3292 310.4697 310.6102 310.7506 310.8911 311.0316 311.1720 311.3124 311.4529 311.5933 311.7337 311.8740 312.0144 312.1548 312.2951 312.4355 312.5758 312.7161 312.8564 312.9967 313.1370 313.2772 313.4175 313.5577 313.6980 313.8382 313.9784 314.1186 314.2588 314.3990 314.5391 314.6793 314.8194 314.9596 315.0997 315.2398 315.3799 315.5200 315.6600 315.8001 315.9402 316.0802 316.2202 316.3602 316.5002 316.6402 316.7802 316.9202 317.0601 317.2001 317.3400 317.4799 317.6198 317.7597 317.8996 318.0395 318.1794 318.3192 318.4591 318.5989 318.7387 318.8785 319.0183 319.1581 319.2979 319.4376 319.5774 319.7171 319.8568 319.9965 320.1362 320.2759 320.4156 320.5553 320.6949 320.8346 320.9742 321.1138 321.2534 321.3930 321.5326 321.6722 321.8117 321.9513 322.0908 322.2304 322.3699 322.5094 322.6489 322.7883 322.9278 323.0673 323.2067 323.3461 323.4856 323.6250 323.7644 323.9038 324.0431 324.1825 324.3218 324.4612 324.6005 324.7398 324.8791
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Temperature at electronics board [°C], 999=no temperature signal
Column 95: Spectrometer control temperature [°C], 999=no temperature signal
Column 96: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 97: Temperature in head sensor [°C], 999=no temperature signal
Column 98: Humidity in head sensor [%], -9=no humidity signal
Column 99: Pressure in head sensor [hPa], -9=no pressure signal
Columns 100-241: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 242-383: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240224T231242.3Z 8820.967156 290 1 27.83 2 68.80 119.89 107.35 296.53 0.00 1 0.00 1 0 17 6.794e-02 7.059e-03 5.026e-02 5.025e-03 3.937122e-01 2.539257e-03 4.564088e-03 -6.000000e+00 3.812010e-02 225.72 -2.00 3.41 -2.00 319.37 0.00e+00 6.979698e-04 6.508207e-04 1.723477e-04 -6.000000e+00 1.675314e-03 279.76 -2.00 20.00 -2.00 318.71 0.00e+00 2.739 0.000 302.00 328.00 3 4.4545e+00 7.0925e-03 3.3701e-02 -6.0000e+00 9.4403e-02 4.3007e-02 8.2842e-03 1.9846e-02 -6.0000e+00 1.0264e-01 -2.2632e-02 6.3718e-03 9.9392e-03 -6.0000e+00 6.1083e-02 4.0954e-03 3.3626e-03 2.9888e-03 -6.0000e+00 2.6412e-02 2.4406e-04 -5.0878e-04 1.4373e-04 3.1526e-05 -6.0000e+00 1.7669e-03 2.6262e-02 0.0000e+00 12 9 1 12 1 1 99.49 21.03 0.28 0.02626 0.02244 10 4 1 5 0 2528.990 24.86 19.99 21.03 12.17 3.6 980.32 -3574 -5148 -35942 -29106 -8888 -20238 -25017 -15447 4796 -34765 -2725 -12943 -3952 -11777 -4954 -765 -727 21729 -9898 7635 5667 676 6798 -178 1989 -8594 2550 -6930 4957 60 -2937 8317 -3122 -3976 -3408 1613 -1622 133 -4113 63 -1473 718 885 -3306 840 372 1797 -3189 -801 -895 -40 2984 2681 1611 634 232 296 25 2327 2096 1836 1787 1794 1041 1649 -21 -621 894 175 132 487 985 2149 -781 -1099 -24 -1683 -584 -1698 -1048 -1493 -934 -1692 -1513 -678 -1198 484 -506 531 662 827 876 343 1512 540 307 578 -386 -121 -323 -389 -478 -29 -645 -757 -841 -974 -387 118 41 263 -87 424 -146 -339 384 210 197 -53 -286 -283 237 269 308 612 237 1234 532 563 501 195 -231 83 8 -166 80 187 129 -280 -473 -172 -458 -98 -154 -1444 -984 -226 -595 -870 -560 155 -1703 -99 -590 -198 -762 -347 -56 -57 1437 -941 632 478 60 606 -18 213 -1048 269 -754 469 6 -364 1035 -473 -588 -473 223 -268 26 -1020 17 -432 215 270 -1055 259 115 544 -1014 -252 -298 -14 1132 1089 695 285 108 138 12 1019 931 872 939 1037 637 963 -12 -333 494 111 94 367 747 1558 -546 -695 -13 -905 -320 -1071 -756 -1220 -829 -1595 -1508 -655 -1235 511 -545 552 708 811 788 297 1363 550 353 678 -502 -160 -405 -443 -548 -32 -793 -909 -1055 -1287 -538 177 67 445 -146 676 -216 -469 515 291 291 -84 -466 -455 367 402 440 833 337 1711 726 846 812 331 -404 150 15 -340 167 402 280 -598 -967 -333 -855