File name: Pandora216s1_Ulaanbaatar_20240902_L2Fit_fsus1c5d20230802p1-8.txt
File generation date: 20241126T153901.5Z
Data description: Level 2 spectral fitting results file
Data file version: fsus1c5p1-8
Local principal investigator: Enkhbaatar Davaanyam
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 216
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora216_OF_v4d20211104.txt
Instrument calibration file used: Pandora216s1_CF_v5d20230802.txt
Level 1 file used: Pandora216s1_Ulaanbaatar_20240902_L1_smca1c5d20230802p1-8.txt
Full location name: Center for Meteorology, Hydrology and Environmental Monitoring, Ulaanbaatar
Short location name: Ulaanbaatar
Country of location: Mongolia
Location latitude [deg]: 47.9188
Location longitude [deg]: 106.8480
Location altitude [m]: 1305
Local noon date: 20240902
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Based on session 2 Lab calibration analysis after repairs + OoB session for fieldcal
First and last pixel inside fitting window: 203 347
Nominal wavelengths inside fitting window [nm]: 306.0761 306.2172 306.3584 306.4995 306.6406 306.7817 306.9228 307.0639 307.2050 307.3460 307.4871 307.6281 307.7691 307.9102 308.0512 308.1922 308.3331 308.4741 308.6151 308.7560 308.8970 309.0379 309.1788 309.3197 309.4606 309.6015 309.7424 309.8832 310.0241 310.1649 310.3058 310.4466 310.5874 310.7282 310.8690 311.0097 311.1505 311.2913 311.4320 311.5727 311.7134 311.8542 311.9948 312.1355 312.2762 312.4169 312.5575 312.6982 312.8388 312.9794 313.1200 313.2606 313.4012 313.5418 313.6823 313.8229 313.9634 314.1039 314.2445 314.3850 314.5255 314.6659 314.8064 314.9469 315.0873 315.2278 315.3682 315.5086 315.6490 315.7894 315.9298 316.0702 316.2105 316.3509 316.4912 316.6315 316.7718 316.9121 317.0524 317.1927 317.3330 317.4732 317.6135 317.7537 317.8940 318.0342 318.1744 318.3146 318.4547 318.5949 318.7351 318.8752 319.0153 319.1555 319.2956 319.4357 319.5758 319.7158 319.8559 319.9960 320.1360 320.2760 320.4161 320.5561 320.6961 320.8360 320.9760 321.1160 321.2559 321.3959 321.5358 321.6757 321.8156 321.9555 322.0954 322.2353 322.3752 322.5150 322.6548 322.7947 322.9345 323.0743 323.2141 323.3539 323.4936 323.6334 323.7731 323.9129 324.0526 324.1923 324.3320 324.4717 324.6114 324.7511 324.8907 325.0304 325.1700 325.3096 325.4492 325.5888 325.7284 325.8680 326.0075 326.1471 326.2866
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Bromine oxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of bromine oxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of bromine oxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Bromine oxide effective temperature [K]
Column 28: Independent uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of bromine oxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective bromine oxide fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for bromine oxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Formaldehyde slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of formaldehyde slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of formaldehyde slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Formaldehyde effective temperature [K]
Column 39: Independent uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of formaldehyde effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective formaldehyde fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for formaldehyde [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrous acid slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrous acid slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrous acid slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrous acid effective temperature [K]
Column 50: Independent uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrous acid effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrous acid fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrous acid [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 56: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Nitrogen dioxide effective temperature [K]
Column 61: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: rms-based uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 76: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 77: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 78: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 79: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 80: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 82: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 83: Sulfur dioxide effective temperature [K]
Column 84: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 85: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 86: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 87: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 88: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 89: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 90: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 91: Lower limit used for wavelength scaling [nm]
Column 92: Upper limit used for wavelength scaling [nm]
Column 93: Order of smoothing polynomial
Column 94: Smoothing polynomial coefficient, order 0
Column 95: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 99: Smoothing polynomial coefficient, order 1
Column 100: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 104: Smoothing polynomial coefficient, order 2
Column 105: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 109: Smoothing polynomial coefficient, order 3
Column 110: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 114: Smoothing polynomial coefficient, order 4
Column 115: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 119: Mean value of measured data inside fitting window [same units as measurements]
Column 120: Offset polynomial coefficient, order 0
Column 121: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 125: Wavelength change polynomial coefficient, order 0
Column 126: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 130: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 131: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 132: Resolution change polynomial coefficient, order 0
Column 133: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 134: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 135: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 136: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 137: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 138: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 139: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 140: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 141: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 142: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 143: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 144: Wavelength effective temperature [°C], 999=no effective temperature given
Column 145: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 146: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 147: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 148: Number of bright count cycles
Column 149: Number of dark count cycles
Column 150: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 151: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 152: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 153: Integration time [ms]
Column 154: Temperature at electronics board [°C], 999=no temperature signal
Column 155: Spectrometer control temperature [°C], 999=no temperature signal
Column 156: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 157: Temperature in head sensor [°C], 999=no temperature signal
Column 158: Humidity in head sensor [%], -9=no humidity signal
Column 159: Pressure in head sensor [hPa], -9=no pressure signal
Columns 160-304: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 305-449: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240902T104457.0Z 9011.447881 5 1 50.52 2 83.13 273.81 83.79 281.39 0.00 1 0.00 1 0 113 1.483e-01 6.369e-03 8.094e-02 2.525e-03 2.786687e-06 1.128676e-06 1.133330e-06 3.805186e-07 6.542755e-05 229.54 -2.00 3.66 -2.00 324.14 0.00e+00 6.219706e-03 5.535152e-04 1.586045e-03 1.427408e-05 1.777134e-02 277.22 -2.00 20.00 -2.00 324.96 0.00e+00 1.825483e-03 7.342709e-04 1.933657e-03 2.594874e-05 3.240652e-02 277.22 -2.00 20.00 -2.00 323.56 0.00e+00 6.497540e-03 1.704718e-03 1.811454e-03 1.332470e-05 3.293556e-02 277.22 -2.00 20.00 -2.00 323.97 0.00e+00 8.294397e-01 7.512428e-03 4.372723e-03 5.557437e-04 2.050204e-01 224.73 2.01 0.00 0.04 328.94 322.84 0.00e+00 -3.187971e-03 1.334009e-03 8.861235e-03 1.836928e-05 4.899568e-03 277.22 -2.00 20.00 -2.00 322.06 0.00e+00 7.665 0.009 303.00 329.40 4 9.9125e-01 1.4352e-02 7.2531e-02 1.9177e-03 6.1181e-01 2.5260e-01 3.1562e-02 7.0959e-02 2.8128e-04 6.6062e-01 -7.7721e-01 2.2469e-02 1.6764e-02 2.0494e-04 3.6958e-01 7.8604e-01 1.2660e-02 1.2198e-02 2.5413e-04 1.2426e-01 -2.7863e-01 5.3982e-03 8.8079e-03 1.3899e-04 8.8811e-02 1.7661e-04 3.3833e-02 2.7953e-03 1.8690e-03 6.7573e-06 2.0334e-03 -5.6457e-05 1.1844e-04 1.4097e-04 1.2608e-06 5.1098e-03 2.3829e-03 0.0000e+00 2.4636e-01 1.0808e-01 4.5651e-02 4.5877e-04 4.7309e+00 12 8 8 10 0 0 92.08 20.00 0.43 0.00238 0.00195 158 29 1 5 0 319.740 22.29 15.00 20.00 31.09 2.5 980.91 -48778 -45784 -50900 -53639 -32165 -40274 -13197 -7680 -762 10222 4022 -5184 -6959 -2292 -35521 -14517 -23950 -14010 -26047 -38509 -35723 -39964 -31674 -32440 -22939 -10469 -8810 -37222 -16111 -17442 -8416 -552 22263 8783 9172 20274 11814 12022 4301 7348 -4949 3603 -799 11208 1950 17750 13260 14165 15536 10154 22565 1812 -948 -2871 2557 4236 5879 2683 -703 -1393 3340 5117 3433 4954 2417 2230 -1700 -2793 -6644 -5964 -6981 -2754 -575 1483 425 762 -923 -1322 -284 -1024 -903 -1871 -1689 -3159 -2290 -2846 -2379 -1073 -848 569 -2 496 68 -261 -878 7 -302 478 -253 417 957 473 635 516 789 -77 218 150 374 -7 -194 56 432 539 458 460 -96 -447 -701 39 546 147 -111 -155 -227 -426 -287 -307 -156 137 201 -5 -272 -79 182 261 77 -93 -92 -295 75 66 -99 98 163 -615 -528 -664 -758 -259 -665 -143 -100 -10 112 55 -87 -105 -23 -832 -187 -458 -211 -517 -884 -598 -659 -485 -721 -549 -223 -185 -1308 -347 -471 -256 -20 660 389 423 766 500 483 194 320 -276 190 -51 689 158 1295 1138 1294 1449 1025 1851 184 -97 -313 294 554 848 423 -106 -218 539 920 720 1113 567 503 -366 -543 -1228 -1080 -1410 -632 -158 475 158 309 -405 -618 -138 -475 -421 -939 -805 -1437 -1001 -1290 -1191 -570 -535 415 -1 432 58 -207 -635 5 -209 351 -199 350 881 455 691 620 994 -98 270 180 442 -9 -248 69 572 692 561 541 -109 -494 -763 44 669 194 -165 -256 -378 -759 -548 -621 -307 272 400 -10 -530 -143 318 458 145 -183 -202 -677 189 173 -276 284 463
SS 20240902T105706.1Z 9011.456321 8 1 50.47 2 85.16 276.04 85.76 283.51 0.00 1 0.00 1 0 65 2.202e-01 2.048e-02 1.915e-01 1.117e-02 2.364839e-05 5.506742e-06 5.049373e-06 3.806647e-07 9.715069e-05 229.53 -2.00 3.66 -2.00 324.59 0.00e+00 8.344634e-03 2.547272e-03 3.323849e-03 1.482569e-05 2.642277e-02 277.22 -2.00 20.00 -2.00 325.38 0.00e+00 1.786364e-02 3.646881e-03 1.553885e-03 2.619782e-05 4.763856e-02 277.22 -2.00 20.00 -2.00 324.02 0.00e+00 -7.649101e-03 8.567489e-03 3.162182e-03 1.676984e-05 4.893843e-02 277.22 -2.00 20.00 -2.00 324.44 0.00e+00 1.050523e+00 3.676257e-02 1.589953e-02 5.586133e-04 3.057733e-01 224.82 7.86 0.00 0.04 489.06 323.49 0.00e+00 -3.134035e-02 4.855842e-03 4.384433e-03 1.837650e-05 7.260524e-03 277.22 -2.00 20.00 -2.00 322.68 0.00e+00 10.094 0.021 303.00 329.40 4 1.1307e+00 7.8134e-02 8.8899e-02 1.9197e-03 9.1100e-01 1.3427e+00 1.4360e-01 5.8892e-02 3.4173e-04 9.8385e-01 -1.7119e+00 7.1698e-02 4.4193e-02 1.5510e-04 5.3560e-01 9.3042e-01 3.6861e-02 4.7823e-02 1.0218e-04 1.7970e-01 -1.6816e-01 2.3661e-02 9.9725e-03 6.5325e-05 1.2823e-01 1.7003e-05 6.8509e-02 1.3889e-02 6.6082e-04 2.0600e-06 1.0153e-03 -1.6530e-03 6.0976e-04 3.6215e-04 1.4481e-06 7.5742e-03 3.0543e-03 0.0000e+00 8.0514e-01 3.9835e-01 7.1731e-02 3.6435e-04 5.5090e+00 12 8 8 10 0 0 93.38 20.01 1.00 0.00305 -0.00956 38 7 1 5 0 1328.150 22.29 15.00 20.01 30.64 2.6 978.41 5519 19828 23747 27818 37635 28142 14743 55909 13599 47659 14181 51049 32823 18375 -95 -21160 23979 23163 49470 -21942 3125 -9517 -19962 -41754 -48538 -333 -7467 -53663 -40708 -4860 -31365 21722 80829 32600 -14447 24742 24064 2856 4509 -19357 -7262 -22465 -10209 -10971 -19856 15053 16851 49846 28056 16888 117179 29334 -20793 -4552 -21858 5895 4489 18240 5831 -3482 265 4130 3526 16588 17444 3989 14291 -7951 -5344 -3755 -26881 -20544 -4290 14376 2874 7487 -5902 7782 4646 8641 2103 -1050 -6817 3905 -10760 -14848 -1159 340 5972 5252 5025 813 8799 -1485 -1977 1638 -3365 -754 -3258 809 466 -575 -375 1675 3377 -536 777 -1884 -489 -5271 -149 -2073 2011 -1145 2599 -945 -35 -545 52 -3507 -1689 -202 -943 1239 -31 23 -667 716 -900 1727 -391 351 872 -1541 1957 -68 253 -923 664 -682 1637 1070 -997 311 -940 302 996 1214 1349 1493 1340 897 1479 839 1513 725 982 821 530 -4 -1425 876 1047 1189 -1794 114 -320 -768 -2691 -3921 -12 -302 -4387 -2545 -178 -2534 961 1011 1818 -1667 1380 1111 159 208 -1266 -377 -1620 -678 -865 -2082 1057 1313 2742 2434 1592 1240 1893 -2260 -400 -2636 536 470 1640 642 -461 38 651 593 2585 2971 687 2071 -1312 -741 -489 -5176 -3952 -838 2996 730 1995 -1941 2290 1466 2626 679 -337 -2196 1040 -3332 -5084 -387 134 2648 2768 3011 540 5238 -904 -1084 799 -1735 -400 -1887 484 312 -444 -332 1635 3472 -585 825 -2002 -507 -5906 -165 -2421 2248 -1274 2640 -954 -33 -512 48 -3508 -1860 -256 -1279 1844 -52 41 -1292 1457 -1936 3659 -840 722 1669 -2806 3279 -118 468 -1937 1549 -1673 4389 3190 -3272 986 -3130