File name: Pandora270s1_Warsaw-UW_20240125_L2Fit_fout2c2d20230919p1-8.txt
File generation date: 20240313T192659.8Z
Data description: Level 2 spectral fitting results file
Data file version: fout2c2p1-8
Local principal investigator: Iwona Stachlewska
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 270
Spectrometer number: 1
Processing software version used: BlickP v1.8.59
Instrument operation file used: Pandora270_OF_v3d20230517.txt
Instrument calibration file used: Pandora270s1_CF_v2d20230919.txt
Level 1 file used: Pandora270s1_Warsaw-UW_20240125_L1_smca1c2d20230919p1-8.txt
Full location name: Warsaw Observatory Station, Faculty of Physics, University of Warsaw
Short location name: Warsaw-UW
Country of location: Poland
Location latitude [deg]: 52.2113
Location longitude [deg]: 20.9828
Location altitude [m]: 137
Local noon date: 20240125
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: OoB session based on session 1
First and last pixel inside fitting window: 198 340
Nominal wavelengths inside fitting window [nm]: 305.0393 305.1798 305.3202 305.4607 305.6012 305.7416 305.8820 306.0224 306.1629 306.3033 306.4436 306.5840 306.7244 306.8647 307.0051 307.1454 307.2857 307.4260 307.5663 307.7066 307.8469 307.9871 308.1274 308.2676 308.4078 308.5481 308.6883 308.8285 308.9686 309.1088 309.2490 309.3891 309.5293 309.6694 309.8095 309.9496 310.0897 310.2298 310.3698 310.5099 310.6499 310.7900 310.9300 311.0700 311.2100 311.3500 311.4900 311.6299 311.7699 311.9098 312.0498 312.1897 312.3296 312.4695 312.6094 312.7492 312.8891 313.0290 313.1688 313.3086 313.4484 313.5882 313.7280 313.8678 314.0076 314.1473 314.2871 314.4268 314.5666 314.7063 314.8460 314.9857 315.1253 315.2650 315.4047 315.5443 315.6839 315.8236 315.9632 316.1028 316.2424 316.3819 316.5215 316.6610 316.8006 316.9401 317.0796 317.2191 317.3586 317.4981 317.6376 317.7770 317.9165 318.0559 318.1953 318.3348 318.4742 318.6136 318.7529 318.8923 319.0317 319.1710 319.3103 319.4496 319.5890 319.7283 319.8675 320.0068 320.1461 320.2853 320.4246 320.5638 320.7030 320.8422 320.9814 321.1206 321.2598 321.3989 321.5381 321.6772 321.8163 321.9554 322.0945 322.2336 322.3727 322.5117 322.6508 322.7898 322.9289 323.0679 323.2069 323.3459 323.4849 323.6238 323.7628 323.9017 324.0407 324.1796 324.3185 324.4574 324.5963 324.7352 324.8740
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Ozone effective temperature [K]
Column 28: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Sulfur dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of sulfur dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of sulfur dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Sulfur dioxide effective temperature [K]
Column 39: Independent uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of sulfur dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective sulfur dioxide fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for sulfur dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 45: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 46: Lower limit used for wavelength scaling [nm]
Column 47: Upper limit used for wavelength scaling [nm]
Column 48: Order of smoothing polynomial
Column 49: Smoothing polynomial coefficient, order 0
Column 50: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 51: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 52: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 53: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 54: Smoothing polynomial coefficient, order 1
Column 55: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 56: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 57: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 58: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 59: Smoothing polynomial coefficient, order 2
Column 60: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 61: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 62: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 63: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 64: Smoothing polynomial coefficient, order 3
Column 65: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 66: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 67: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 68: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 69: Mean value of measured data inside fitting window [same units as measurements]
Column 70: Wavelength change polynomial coefficient, order 0
Column 71: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 72: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 73: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 74: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 75: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 76: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 77: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 78: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 79: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 80: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 81: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 82: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 83: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 84: Wavelength effective temperature [°C], 999=no effective temperature given
Column 85: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 86: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 87: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 88: Number of bright count cycles
Column 89: Number of dark count cycles
Column 90: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 91: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 92: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 93: Integration time [ms]
Column 94: Spectrometer control temperature [°C], 999=no temperature signal
Column 95: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 96: Temperature in head sensor [°C], 999=no temperature signal
Column 97: Temperature at electronics board 1 [°C], 999=no temperature signal
Column 98: Temperature at electronics board 2 [°C], 999=no temperature signal
Column 99: Humidity in head sensor [%], -9=no humidity signal
Column 100: Pressure in head sensor [hPa], -9=no pressure signal
Columns 101-243: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 244-386: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------
SS 20240125T140436.8Z 8790.586537 466 1 56.01 2 82.98 226.04 93.13 44.15 0.00 1 0.00 1 0 86 1.420e+00 4.037e-01 4.528e-01 1.201e-01 6.254359e-01 8.928214e-02 1.504744e-02 -6.000000e+00 1.100471e+00 222.23 -2.00 3.84 -2.00 312.35 0.00e+00 -6.826241e-03 5.728872e-03 2.488009e-03 -6.000000e+00 4.584825e-02 265.91 -2.00 20.00 -2.00 313.02 0.00e+00 7.523 0.009 302.00 328.00 3 3.7588e+00 2.1767e-01 8.7694e-02 -6.0000e+00 2.6860e+00 1.9382e+00 2.3236e-01 4.8392e-02 -6.0000e+00 2.9122e+00 -1.2847e+00 1.3490e-01 2.5348e-02 -6.0000e+00 1.7379e+00 6.7953e-01 6.4085e-02 7.2877e-03 -6.0000e+00 7.6741e-01 2.9156e-07 -4.7828e-02 4.1633e-03 7.8976e-05 -6.0000e+00 5.2379e-02 -4.7054e-02 1.8694e-03 12 8 8 10 0 0 99.87 25.70 20.30 -0.04705 -0.40645 14 1 3 8 0 4000.000 20.01 25.70 9.40 34.75 33.50 2.0 893.74 900000 -24728 398525 22898 154187 900000 900000 900000 68965 145100 900000 59560 900000 50993 900000 900000 900000 900000 123993 -16115 26160 900000 900000 900000 900000 900000 136222 153598 183278 -11957 900000 100356 900000 150634 900000 90660 900000 -75855 900000 43388 19942 900000 198141 296175 900000 120763 900000 900000 900000 26962 -16151 900000 900000 900000 371026 900000 51591 315602 900000 900000 294035 900000 900000 -4116 900000 900000 53165 161001 80110 92523 900000 900000 137785 39009 900000 900000 82287 900000 900000 14806 900000 8270 900000 900000 900000 89056 900000 35755 207492 900000 93602 13260 900000 127424 -36379 -36245 -13927 900000 900000 138645 -29686 900000 900000 900000 25971 900000 900000 68958 900000 42188 215710 25828 900000 40839 -30279 241093 34989 -3038 76628 900000 900000 241707 108294 900000 436994 30651 20740 -4181 900000 237164 202129 -16119 -5792 -25709 -18347 74724 -8327 53576 48895 30698 -17457 -553 900000 900000 -43247 45761 27709 56065 900000 900000 900000 33656 30546 900000 31346 900000 28789 900000 900000 900000 900000 40340 -21742 22779 900000 900000 900000 900000 900000 29980 29395 26306 -11670 900000 24968 900000 20180 900000 25158 900000 -109602 900000 16607 10305 900000 22752 34009 900000 37818 900000 900000 900000 17450 -15342 900000 900000 900000 42604 900000 29081 36239 900000 900000 33763 900000 900000 -3523 900000 900000 29414 31932 35122 33804 900000 900000 34519 28912 900000 900000 39513 900000 900000 9892 900000 5525 900000 900000 900000 41834 900000 31725 34655 900000 51786 16334 900000 45225 -60760 -55996 -16573 900000 900000 46313 -60118 900000 900000 900000 30364 900000 900000 43910 900000 38314 36028 30467 900000 49025 -79335 42784 47482 -5676 59992 900000 900000 38856 62175 900000 50178 35196 24898 -6067 900000 29956 34815 -23220 -8222 -48306 -33898 56162 -14691 52571 52061 43710 -36264 -1048 900000