File name: Pandora146s1_Yokosuka_20241029_L2Fit_fnvs5c6d20221101p1-8.txt
File generation date: 20241121T031051.8Z
Data description: Level 2 spectral fitting results file
Data file version: fnvs5c6p1-8
Local principal investigator: Yugo Kanaya
Network principal investigator: Alexander Cede
Instrument type: Pandora
Instrument number: 146
Spectrometer number: 1
Processing software version used: BlickP v1.8.60
Instrument operation file used: Pandora146_OF_v4d20200826.txt
Instrument calibration file used: Pandora146s1_CF_v6d20221101.txt
Level 1 file used: Pandora146s1_Yokosuka_20241029_L1_smca1c6d20221101p1-8.txt
Full location name: Japan Agency for Marine-Earth Science and Technology, JAMSTEC Yokosuka
Short location name: Yokosuka
Country of location: Japan
Location latitude [deg]: 35.3207
Location longitude [deg]: 139.6508
Location altitude [m]: 5
Local noon date: 20241029
Notes on s-number (L1 configuration): Corrections NOT applied although requested by the s-number are latency correction, matrix method stray light correction (replaced by simple method)
Data caveats: Based on session 5 for new fieldcal from 20221101
First and last pixel inside fitting window: 926 1473
Nominal wavelengths inside fitting window [nm]: 400.1185 400.2502 400.3819 400.5136 400.6452 400.7769 400.9085 401.0401 401.1717 401.3033 401.4349 401.5664 401.6980 401.8295 401.9610 402.0925 402.2240 402.3555 402.4870 402.6184 402.7499 402.8813 403.0127 403.1441 403.2755 403.4068 403.5382 403.6695 403.8008 403.9321 404.0634 404.1947 404.3260 404.4572 404.5885 404.7197 404.8509 404.9821 405.1133 405.2444 405.3756 405.5067 405.6378 405.7689 405.9000 406.0311 406.1622 406.2932 406.4243 406.5553 406.6863 406.8173 406.9483 407.0792 407.2102 407.3411 407.4721 407.6030 407.7339 407.8647 407.9956 408.1265 408.2573 408.3881 408.5189 408.6497 408.7805 408.9113 409.0420 409.1728 409.3035 409.4342 409.5649 409.6956 409.8262 409.9569 410.0875 410.2181 410.3488 410.4793 410.6099 410.7405 410.8710 411.0016 411.1321 411.2626 411.3931 411.5236 411.6540 411.7845 411.9149 412.0454 412.1758 412.3062 412.4365 412.5669 412.6972 412.8276 412.9579 413.0882 413.2185 413.3488 413.4790 413.6093 413.7395 413.8697 413.9999 414.1301 414.2603 414.3905 414.5206 414.6508 414.7809 414.9110 415.0411 415.1711 415.3012 415.4313 415.5613 415.6913 415.8213 415.9513 416.0813 416.2112 416.3412 416.4711 416.6010 416.7309 416.8608 416.9907 417.1205 417.2504 417.3802 417.5100 417.6398 417.7696 417.8994 418.0291 418.1589 418.2886 418.4183 418.5480 418.6777 418.8074 418.9370 419.0667 419.1963 419.3259 419.4555 419.5851 419.7146 419.8442 419.9737 420.1033 420.2328 420.3623 420.4917 420.6212 420.7507 420.8801 421.0095 421.1389 421.2683 421.3977 421.5271 421.6564 421.7857 421.9151 422.0444 422.1737 422.3029 422.4322 422.5614 422.6907 422.8199 422.9491 423.0783 423.2074 423.3366 423.4657 423.5949 423.7240 423.8531 423.9822 424.1112 424.2403 424.3693 424.4984 424.6274 424.7564 424.8853 425.0143 425.1433 425.2722 425.4011 425.5300 425.6589 425.7878 425.9167 426.0455 426.1744 426.3032 426.4320 426.5608 426.6895 426.8183 426.9471 427.0758 427.2045 427.3332 427.4619 427.5906 427.7192 427.8479 427.9765 428.1051 428.2337 428.3623 428.4909 428.6194 428.7479 428.8765 429.0050 429.1335 429.2620 429.3904 429.5189 429.6473 429.7757 429.9041 430.0325 430.1609 430.2893 430.4176 430.5459 430.6743 430.8026 430.9309 431.0591 431.1874 431.3156 431.4439 431.5721 431.7003 431.8285 431.9566 432.0848 432.2129 432.3410 432.4691 432.5972 432.7253 432.8534 432.9814 433.1095 433.2375 433.3655 433.4935 433.6215 433.7494 433.8774 434.0053 434.1332 434.2611 434.3890 434.5169 434.6447 434.7726 434.9004 435.0282 435.1560 435.2838 435.4116 435.5393 435.6670 435.7948 435.9225 436.0502 436.1778 436.3055 436.4331 436.5608 436.6884 436.8160 436.9436 437.0712 437.1987 437.3263 437.4538 437.5813 437.7088 437.8363 437.9637 438.0912 438.2186 438.3461 438.4735 438.6009 438.7282 438.8556 438.9829 439.1103 439.2376 439.3649 439.4922 439.6195 439.7467 439.8740 440.0012 440.1284 440.2556 440.3828 440.5099 440.6371 440.7642 440.8913 441.0185 441.1455 441.2726 441.3997 441.5267 441.6538 441.7808 441.9078 442.0348 442.1617 442.2887 442.4156 442.5426 442.6695 442.7964 442.9232 443.0501 443.1770 443.3038 443.4306 443.5574 443.6842 443.8110 443.9377 444.0645 444.1912 444.3179 444.4446 444.5713 444.6980 444.8246 444.9513 445.0779 445.2045 445.3311 445.4577 445.5842 445.7108 445.8373 445.9638 446.0903 446.2168 446.3433 446.4697 446.5962 446.7226 446.8490 446.9754 447.1018 447.2282 447.3545 447.4809 447.6072 447.7335 447.8598 447.9860 448.1123 448.2385 448.3648 448.4910 448.6172 448.7434 448.8695 448.9957 449.1218 449.2479 449.3740 449.5001 449.6262 449.7523 449.8783 450.0043 450.1304 450.2564 450.3823 450.5083 450.6343 450.7602 450.8861 451.0120 451.1379 451.2638 451.3897 451.5155 451.6413 451.7672 451.8930 452.0187 452.1445 452.2703 452.3960 452.5217 452.6474 452.7731 452.8988 453.0245 453.1501 453.2757 453.4014 453.5270 453.6525 453.7781 453.9037 454.0292 454.1547 454.2802 454.4057 454.5312 454.6567 454.7821 454.9076 455.0330 455.1584 455.2838 455.4091 455.5345 455.6598 455.7851 455.9104 456.0357 456.1610 456.2863 456.4115 456.5368 456.6620 456.7872 456.9124 457.0375 457.1627 457.2878 457.4129 457.5380 457.6631 457.7882 457.9133 458.0383 458.1634 458.2884 458.4134 458.5384 458.6633 458.7883 458.9132 459.0381 459.1630 459.2879 459.4128 459.5377 459.6625 459.7873 459.9121 460.0369 460.1617 460.2865 460.4112 460.5360 460.6607 460.7854 460.9101 461.0348 461.1594 461.2841 461.4087 461.5333 461.6579 461.7825 461.9070 462.0316 462.1561 462.2806 462.4051 462.5296 462.6541 462.7786 462.9030 463.0274 463.1518 463.2762 463.4006 463.5250 463.6493 463.7736 463.8979 464.0222 464.1465 464.2708 464.3950 464.5193 464.6435 464.7677 464.8919 465.0161 465.1402 465.2644 465.3885 465.5126 465.6367 465.7608 465.8848 466.0089 466.1329 466.2569 466.3809 466.5049 466.6289 466.7528 466.8768 467.0007 467.1246 467.2485 467.3724 467.4962 467.6201 467.7439 467.8677 467.9915 468.1153 468.2391 468.3628 468.4865 468.6103 468.7340 468.8576 468.9813 469.1050 469.2286 469.3522 469.4758 469.5994 469.7230 469.8466 469.9701
---------------------------------------------------------------------------------------
Column 1: Two letter code of measurement routine
Column 2: UT date and time for center-time of measurement, yyyymmddThhmmssZ (ISO 8601)
Column 3: Fractional days since 1-Jan-2000 midnight for center-time of measurement
Column 4: Routine count (1 for the first routine of the day, 2 for the second, etc.)
Column 5: Repetition count (1 for the first set in the routine, 2 for the second, etc.)
Column 6: Total duration of measurement set in seconds
Column 7: Data processing type index
Column 8: Solar zenith angle for center-time of measurement in degree
Column 9: Solar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 10: Lunar zenith angle for center-time of measurement in degree
Column 11: Lunar azimuth for center-time of measurement in degree, 0=north, increases clockwise
Column 12: Pointing zenith angle in degree, absolute or relative (see next column), 999=tracker not used
Column 13: Zenith pointing mode: zenith angle is... 0=absolute, 1=relative to sun, 2=relative to moon
Column 14: Pointing azimuth in degree, increases clockwise, absolute (0=north) or relative (see next column), 999=tracker not used
Column 15: Azimuth pointing mode: like zenith angle mode but also fixed scattering angles relative to sun (3) or moon (4)
Column 16: Fitting result index: 0=no error or warning, 1, 2=warning, >2=error
Column 17: Number of function evaluations used, 0=linear fitting or fitting not successful or no fitting done
Column 18: rms of unweighted fitting residuals, -9=fitting not successful
Column 19: Normalized rms of fitting residuals weighted with independent uncertainty, -9=fitting not successful or no uncertainty used
Column 20: Expected rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 21: Expected normalized weighted rms based on independent uncertainty, -9=fitting not successful or no uncertainty given
Column 22: Water vapor slant column amount [moles per square meter], -9e99=fitting not successful
Column 23: Independent uncertainty of water vapor slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 24: Structured uncertainty of water vapor slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 25: Common uncertainty of water vapor slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 26: rms-based uncertainty of water vapor slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 27: Water vapor effective temperature [K]
Column 28: Independent uncertainty of water vapor effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 29: Structured uncertainty of water vapor effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 30: Common uncertainty of water vapor effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 31: Effective water vapor fitting wavelength [nm], -9=fitting not successful
Column 32: Diffuse correction applied before fitting at effective fitting wavelength for water vapor [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 33: Molecular iodine slant column amount [moles per square meter], -9e99=fitting not successful
Column 34: Independent uncertainty of molecular iodine slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 35: Structured uncertainty of molecular iodine slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 36: Common uncertainty of molecular iodine slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 37: rms-based uncertainty of molecular iodine slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 38: Molecular iodine effective temperature [K]
Column 39: Independent uncertainty of molecular iodine effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 40: Structured uncertainty of molecular iodine effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 41: Common uncertainty of molecular iodine effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 42: Effective molecular iodine fitting wavelength [nm], -9=fitting not successful
Column 43: Diffuse correction applied before fitting at effective fitting wavelength for molecular iodine [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 44: Nitrogen dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 45: Independent uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 46: Structured uncertainty of nitrogen dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 47: Common uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 48: rms-based uncertainty of nitrogen dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 49: Nitrogen dioxide effective temperature [K]
Column 50: Independent uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 51: Structured uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 52: Common uncertainty of nitrogen dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 53: Effective nitrogen dioxide fitting wavelength [nm], -9=fitting not successful
Column 54: Diffuse correction applied before fitting at effective fitting wavelength for nitrogen dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 55: Oxygen dimer slant column amount [moles squared per meter to the 5th], -9e99=fitting not successful
Column 56: Independent uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 57: Structured uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 58: Common uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 59: rms-based uncertainty of oxygen dimer slant column amount [moles squared per meter to the 5th], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 60: Oxygen dimer effective temperature [K]
Column 61: Independent uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 62: Structured uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 63: Common uncertainty of oxygen dimer effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 64: Effective oxygen dimer fitting wavelength [nm], -9=fitting not successful
Column 65: Diffuse correction applied before fitting at effective fitting wavelength for oxygen dimer [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 66: Ozone slant column amount [moles per square meter], -9e99=fitting not successful
Column 67: Independent uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 68: Structured uncertainty of ozone slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 69: Common uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 70: rms-based uncertainty of ozone slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 71: Ozone effective temperature [K]
Column 72: Independent uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 73: Structured uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 74: Common uncertainty of ozone effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 75: Effective ozone fitting wavelength [nm], -9=fitting not successful
Column 76: Diffuse correction applied before fitting at effective fitting wavelength for ozone [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 77: Iodine dioxide slant column amount [moles per square meter], -9e99=fitting not successful
Column 78: Independent uncertainty of iodine dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 79: Structured uncertainty of iodine dioxide slant column amount [moles per square meter], -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 80: Common uncertainty of iodine dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -6=no common uncertainty input was given, -7=not given since method "MEAS" was chosen, -9=spectral fitting not successful
Column 81: rms-based uncertainty of iodine dioxide slant column amount [moles per square meter], -1=cross section is zero in this wavelength range, -3=spectral fitting was done, but no rms-based uncertainty could be retrieved, -9=spectral fitting not successful
Column 82: Iodine dioxide effective temperature [K]
Column 83: Independent uncertainty of iodine dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no independent uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -5=no independent uncertainty input was given, -9=spectral fitting not successful
Column 84: Structured uncertainty of iodine dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -9=spectral fitting not successful
Column 85: Common uncertainty of iodine dioxide effective temperature [K], -1=temperature fitting was requested, but cross section is zero in this wavelength range, -2=no temperature fitting was requested and output for effective temperature and structured uncertainty of it is based on f-code, -3=spectral fitting was done, but no common uncertainty could be retrieved, -4=temperature fitting was requested, but differential optical depth is too small to retrieve the temperature, -6=no common uncertainty input was given, -9=spectral fitting not successful
Column 86: Effective iodine dioxide fitting wavelength [nm], -9=fitting not successful
Column 87: Diffuse correction applied before fitting at effective fitting wavelength for iodine dioxide [%], 0=no diffuse correction applied or fitting not requested, >0=measured diffuse correction, <0=(negative value of) calculated diffuse correction
Column 88: Molecular scattering air mass factor used for molecular scattering subtraction before the fitting
Column 89: Estimated uncertainty of molecular scattering air mass factor, -9=molecular scattering was not subtracted before the fitting
Column 90: Lower limit used for wavelength scaling [nm]
Column 91: Upper limit used for wavelength scaling [nm]
Column 92: Order of smoothing polynomial
Column 93: Smoothing polynomial coefficient, order 0
Column 94: Independent uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 95: Structured uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 96: Common uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 97: rms-based uncertainty of smoothing polynomial coefficient, order 0, -9=fitting not successful
Column 98: Smoothing polynomial coefficient, order 1
Column 99: Independent uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 100: Structured uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 101: Common uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 102: rms-based uncertainty of smoothing polynomial coefficient, order 1, -9=fitting not successful
Column 103: Smoothing polynomial coefficient, order 2
Column 104: Independent uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 105: Structured uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 106: Common uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 107: rms-based uncertainty of smoothing polynomial coefficient, order 2, -9=fitting not successful
Column 108: Smoothing polynomial coefficient, order 3
Column 109: Independent uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 110: Structured uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 111: Common uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 112: rms-based uncertainty of smoothing polynomial coefficient, order 3, -9=fitting not successful
Column 113: Smoothing polynomial coefficient, order 4
Column 114: Independent uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 115: Structured uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 116: Common uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 117: rms-based uncertainty of smoothing polynomial coefficient, order 4, -9=fitting not successful
Column 118: Mean value of measured data inside fitting window [same units as measurements]
Column 119: Offset polynomial coefficient, order 0
Column 120: Independent uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 121: Structured uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 122: Common uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 123: rms-based uncertainty of offset polynomial coefficient, order 0, -9=fitting not successful
Column 124: Wavelength change polynomial coefficient, order 0
Column 125: Independent uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 126: Structured uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 127: Common uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 128: rms-based uncertainty of wavelength change polynomial coefficient, order 0, -9=fitting not successful
Column 129: Wavelength change polynomial coefficient, order 1
Column 130: Independent uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 131: Structured uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 132: Common uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 133: rms-based uncertainty of wavelength change polynomial coefficient, order 1, -9=fitting not successful
Column 134: L1 based wavelength change coefficient, order 0, -9=no L1 wavelength change determination
Column 135: L1 based wavelength change coefficient, order 1, -9=no L1 wavelength change determination
Column 136: Resolution change polynomial coefficient, order 0
Column 137: Independent uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 138: Structured uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 139: Common uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 140: rms-based uncertainty of resolution change polynomial coefficient, order 0, -9=fitting not successful
Column 141: L2Fit data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 142: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ1 limit, 0=L1 data quality above 0, 1=Spectral fitting was not successful, 2=Wavelength shift too large, 3=Normalized rms of fitting residuals weighted with independent uncertainty too large
Column 143: Sum over 2^i using those i, for which the corresponding L2Fit data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 144: L1 data quality flag: 0=assured high quality, 1=assured medium quality, 2=assured low quality, 10=not-assured high quality, 11=not-assured medium quality, 12=not-assured low quality
Column 145: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ1 limit, 0=Saturated data, 1=Too few dark counts measurements, 2=No temperature given or effective temperature too different from the reference temperature, 3=Dark count too high, 4=Unsuccessful dark background fitting, 5=The dark count differs significantly from the dark map for too many pixels, 6=Absolute value of estimated average residual stray light level too high, 7=Although attempted, no wavelength change could be retrieved, 8=Absolute value of retrieved wavelength shift too large, 9=Retrieved wavelength shift differs too much from the shift predicted by the effective temperature
Column 146: Sum over 2^i using those i, for which the corresponding L1 data quality parameter exceeds the DQ2 limit (same parameters as for DQ1)
Column 147: Atmospheric variability [%], 999=no atmospheric variability was determined
Column 148: Wavelength effective temperature [°C], 999=no effective temperature given
Column 149: Estimated average residual stray light level [%] (only valid for stray light correction methods 2 and higher)
Column 150: Retrieved wavelength shift from L1 data [nm], -9=no wavelength change determination
Column 151: Retrieved total wavelength shift [nm], -9=no wavelength change fitting
Column 152: Number of bright count cycles
Column 153: Number of dark count cycles
Column 154: Effective position of filterwheel #1, 0=filterwheel not used, 1-9 are valid positions
Column 155: Effective position of filterwheel #2, 0=filterwheel not used, 1-9 are valid positions
Column 156: Sum over 2^i, 0=spectra were interpolated in time, 1=spectra are corrected for off-target signal
Column 157: Integration time [ms]
Column 158: Temperature at electronics board [°C], 999=no temperature signal
Column 159: Spectrometer control temperature [°C], 999=no temperature signal
Column 160: Auxiliary spectrometer temperature [°C], 999=no temperature signal
Column 161: Temperature in head sensor [°C], 999=no temperature signal
Column 162: Humidity in head sensor [%], -9=no humidity signal
Column 163: Pressure in head sensor [hPa], -9=no pressure signal
Columns 164-711: Unweighted slant column residuals for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting
Columns 712-1259: Normalized slant column residuals weighted with independent instrumental uncertainty for each pixel inside the fitting window multiplied by 1e5, 9e5=pixel was not used for fitting, 0=no independent instrumental uncertainty was given
---------------------------------------------------------------------------------------